openwrt

mr/openwrt

Go to file

Gabor Juhos 3626444c6d ramips: rt305x: add support for the Asus WL-330N3G board This patch adds support for the ASUS WL-330N3G Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led. The bi-color led is driven by 2 gpio. I don't know how to handle this, so I simply made 2 leds : one red, one blue. But the red light takes precedence over the blue one according to the chart below. r = led is red b = led is blue 0 = led is off xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness initial state action led gpio state r0 b0 r0->r1 r r0 b0 r0 b0 b0->b1 b r0 b1 r1 b0 r1->r0 0 r0 b0 r1 b0 b0->b1 r r1 b1 r1 b1 r1->r0 b r0 b1 r1 b1 b1->b0 r r1 b0 r0 b1 r0->r1 r r1 b1 r0 b1 b1->b0 0 r0 r0 Signed-off-by: Frédéric Leroy <fredo@starox.org> SVN-Revision: 31450		2012-04-23 16:56:05 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	ensure that profile Makefiles are sourced in alphabetical order Since make 3.82 does not guarantee file ordering anymore, target profiles might get included in random order, leading to bad default values when only selecting the toplevel target and populating the .config with defconfig. This commit should also fix the ar71xx snapshot builds.	2012-04-23 16:10:25 +00:00
package	6to4: follow RFC 6598 and consider 100.61.0.0/10 a private range (#11323 )	2012-04-23 10:12:00 +00:00
scripts	allow arbitary folder layout when using localmirrors	2012-04-10 14:11:45 +00:00
target	ramips: rt305x: add support for the Asus WL-330N3G board	2012-04-23 16:56:05 +00:00
toolchain	remove screwed up patch for gcc 4.7-linaro which got committed by accident	2012-04-21 10:23:49 +00:00
tools	tools: add xz dependency to automake	2012-04-21 16:09:04 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	make xz ramdisk images also available for 2.6.39+	2012-04-18 15:14:05 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	abort built in prereq target if there is no site config file for the current target	2012-01-19 12:19:28 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
rules.mk	Use build suffix on build_dir paths	2012-04-10 10:55:55 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org