mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
37,928 Commits 3 Branches 0 Tags 517 MiB
C 90.8%
Makefile 4.4%
Shell 1.6%
Roff 1.5%
Perl 0.6%
Other 1%
3959110c5b
Go to file
Piotr Dymacz 3959110c5b ar71xx: add support for ALFA Network AP121F 
ALFA Network AP121F is a pocket-size router dedicated for VPN/TOR users.
Device is based on Atheros AR9331 WiSoC and is running a custom version
(updated from OpenWrt CC to LEDE 17.01 release) of NetAidKit firmware.

Specification:

- 400/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR1)
- 16 MB of FLASH (SPI NOR)
- 1x 10/100 Mbps Ethernet
- 1T1R 2.4 GHz
- 1x microSD (optional, on separate PCB)
- 3x LED, 1x button, 1x switch
- UART header on PCB

Flash instruction (under U-Boot web recovery mode):

1. Configure PC with static IP 192.168.1.2/24.
2. Connect PC with RJ45 port, press the reset button, power up device,
   wait for first blink of all LEDs (indicates network setup), then keep
   button for 3 following blinks and release it.
3. Open 192.168.1.1 address in your browser and upload sysupgrade image.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-07-23 00:26:51 +02:00
.github Add Issue submission template (redirect to bugs.lede-project.org) 2016-09-01 09:01:04 -04:00
config x86: Set default baud rate on Geode images to 115200 2017-02-17 10:30:30 +01:00
include image: fix ar71xx legacy images 2017-07-14 23:36:50 +02:00
package procd: backport kernel watchdog start/stop support 2017-07-13 21:54:59 +02:00
scripts feeds: add option to force feed update despite modified files 2017-04-28 17:02:48 +02:00
target ar71xx: add support for ALFA Network AP121F 2017-07-23 00:26:51 +02:00
toolchain toolchain/gdb: update to version 7.12.1 2017-05-30 01:32:21 +02:00
tools firmware-utils: fix dgn3500sum compiler warnings 2017-06-26 20:11:16 +02:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore gitignore: add /overlay 2017-01-15 18:16:29 +01:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in branding: add LEDE branding 2016-03-24 22:40:13 +01:00
feeds.conf.default LEDE v17.01.2: revert to branch defaults 2017-06-10 13:08:07 +02:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile Makefile: ensure that BIN_DIR exists for diffconfig 2017-01-08 18:50:00 +01:00
README README: Update project README 2016-05-12 03:29:36 +02:00
rules.mk build: use mkhash to replace various quirky md5sum/openssl calls 2017-01-05 11:09:12 +01:00

README 

This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your LEDE Community
	http://www.lede-project.org