openwrt/target/linux/lantiq/image/DGN1000B.dts
2012-11-02 20:07:47 +00:00

158 lines
2.8 KiB
Plaintext

/dts-v1/;
/include/ "amazonse.dtsi"
/ {
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
memory@0 {
reg = <0x0 0x1000000>;
};
fpi@10000000 {
#address-cells = <1>;
#size-cells = <1>;
gpio: pinmux@E100B10 {
compatible = "lantiq,pinctrl-ase";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
#gpio-cells = <2>;
gpio-controller;
reg = <0xE100B10 0xA0>;
state_default: pinmux {
spi {
lantiq,groups = "spi", "spi_cs1";
lantiq,function = "spi";
};
asc {
lantiq,groups = "asc";
lantiq,function = "asc";
};
exin {
lantiq,groups = "exin1", "exin2";
lantiq,function = "exin";
};
conf_in {
lantiq,pins = "io0", "io29"; /* nand rdy */
lantiq,pull = <2>;
};
};
};
adsl: dsl@E116000 {
compatible = "lantiq,dsl-xway";
interrupt-parent = <&icu0>;
interrupts = <63 96>;
};
etop@E180000 {
compatible = "lantiq,etop-xway";
reg = <0xE180000 0x40000>;
interrupt-parent = <&icu0>;
interrupts = <105 109>;
phy-mode = "ephy";
mac-address = [ 00 11 22 33 44 55 ];
};
spi@E100800 {
compatible = "lantiq,spi-xway";
reg = <0xE100800 0x100>;
interrupt-parent = <&icu0>;
interrupts = <24 25 26>;
#address-cells = <1>;
#size-cells = <1>;
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "s25fl129p0";
reg = <0 0>;
linux,modalias = "m25p80", "mx25l3205d";
spi-max-frequency = <5000000>;
partition@0 {
reg = <0x0 0x20000>;
label = "SPI (RO) U-Boot Image";
read-only;
};
partition@20000 {
reg = <0x20000 0x10000>;
label = "ENV_MAC";
read-only;
};
partition@30000 {
reg = <0x30000 0x10000>;
label = "DPF";
read-only;
};
partition@40000 {
reg = <0x40000 0x10000>;
label = "NVRAM";
read-only;
};
partition@500000 {
reg = <0x50000 0x003a0000>;
label = "kernel";
};
};
};
};
/* missing button on <&gpio 25 0> */
/* gpio-keys {
compatible = "gpio-keys";
interrupt-parent = <&icu0>;
interrupts = <30 31>;
reset {
label = "Reset";
gpios = <&gpio 0 0>;
gpio-key,wakeup;
linux,code = <0x100>;
};
wps {
label = "WPS";
gpios = <&gpio 29 1>;
gpio-key,wakeup;
linux,code = <0x100>;
};
};
*/
gpio-leds {
compatible = "gpio-leds";
festnetz {
label = "DSL";
gpios = <&gpio 1 1>;
default-state = "on";
};
internet1 {
label = "Internet1";
gpios = <&gpio 2 1>;
default-state = "on";
};
internet2 {
label = "Internet2";
gpios = <&gpio 3 1>;
default-state = "on";
};
wps {
label = "WPS";
gpios = <&gpio 4 1>;
default-state = "on";
};
power {
label = "power";
gpios = <&gpio 13 1>;
default-state = "on";
};
};
};