mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
3a313a3e11
openwrt/target/linux/generic/files/drivers/net/phy
History
Felix Fietkau 3a313a3e11 ar8216: add swconfig attribute to display ARL table on AR8327/AR8337 
Add global read-only swconfig attribute "arl_table" to display the
address resolution table.
So far the chip-specific part is implemented for AR8327/AR8337 only
as I don't have the datasheets for the other AR8XXX chips.

Successfully tested on TL-WDR4300 (AR8327rev2)
and TL-WDR4900 (AR8327rev4).

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44104
2015-01-24 19:42:06 +00:00
..
b53 b53: hardcode reset GPIO for Linksys WRT300N 1.1 2014-07-06 11:40:51 +00:00
adm6996.c adm6996: the GPIO interface for the adm6996l does not support switch statistics. 2014-07-05 12:13:56 +00:00
adm6996.h linux/generic: add MIB counters and port status to ADM6996 switch 2014-04-22 08:08:02 +00:00
ar8216.c ar8216: add swconfig attribute to display ARL table on AR8327/AR8337 2015-01-24 19:42:06 +00:00
ar8216.h ar8216: add swconfig attribute to display ARL table on AR8327/AR8337 2015-01-24 19:42:06 +00:00
ar8327.c ar8216: add swconfig attribute to display ARL table on AR8327/AR8337 2015-01-24 19:42:06 +00:00
ar8327.h ar8216: add swconfig attribute to display ARL table on AR8327/AR8337 2015-01-24 19:42:06 +00:00
ip17xx.c unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range. 2010-10-12 20:49:35 +00:00
mvsw61xx.c mvsw61xx: track and set per-VLAN port state in STU 2015-01-11 17:20:16 +00:00
mvsw61xx.h mvsw61xx: track and set per-VLAN port state in STU 2015-01-11 17:20:16 +00:00
mvswitch.c generic: mvswitch: add detach callback 2013-02-07 15:18:34 +00:00
mvswitch.h rename target/linux/generic-2.6 to generic 2010-06-26 20:42:58 +00:00
psb6970.c unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range. 2010-10-12 20:49:35 +00:00
rtl8306.c revert: kernel: rtl8306: fix max pvid & remove port isolation 2014-03-30 10:04:55 +00:00
rtl8366_smi.c strict_strtoul is obsolete, use kstrtoul instead 2013-07-27 09:23:18 +00:00
rtl8366_smi.h linux: generic: rtl836*: fix compilation with !CONFIG_OF 2012-12-15 13:32:02 +00:00
rtl8366rb.c generic: add port mirroring/monitoring capability to rtl8366rb switch 2013-06-04 13:25:52 +00:00
rtl8366s.c fix rtl8366s OF binding 2013-04-12 18:56:05 +00:00
rtl8367.c rtl8367: add support for configuring the VLAN FID 2013-08-12 17:25:25 +00:00
rtl8367b.c generic: rtl8367: add compatible string with vendor prefix 2013-04-06 17:19:31 +00:00
swconfig_leds.c ar71xx: swconfig: use the local helper to set LED brightness on link down 2014-01-26 16:46:21 +00:00
swconfig.c ar8216: add 802.3az EEE info to swconfig get_link attribute 2015-01-18 00:53:59 +00:00