mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
3f059f58db
openwrt/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts
Luka Perkov 3f059f58db imx6: update PCIe driver 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38080
2013-09-20 01:59:32 +00:00

429 lines
8.8 KiB
Plaintext
Raw Blame History

/*
* Copyright 2013 Gateworks Corporation
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx6q-ventana.dtsi"
/ {
model = "Gateworks Ventana GW5400-A";
compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
aliases {
ethernet0 = &fec;
ethernet1 = &eth1;
sky2 = &eth1;
};
/* SDRAM addressing */
memory {
reg = <0x10000000 0x40000000>;
};
chosen {
bootargs = "console=ttymxc1,115200";
};
leds {
compatible = "gpio-leds";
led0: user0 {
label = "user0";
gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG# */
linux,default-trigger = "heartbeat";
};
led1: user1 {
label = "user1";
gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR# */
};
led2: user2 {
label = "user2";
gpios = <&gpio4 15 0>; /* 111 -> MX6_LOCLEDR# */
};
};
regulators {
compatible = "simple-bus";
reg_2p5v: 2p5v {
compatible = "regulator-fixed";
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
reg_3p3v: 3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usb_otg_vbus: usb_otg_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
};
};
sound {
compatible = "fsl,imx6q-sabrelite-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx6q-sabrelite-sgtl5000";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <1>;
mux-ext-port = <4>;
};
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
/* USB OTG Power Enable */
MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000
/* 3:19 SPINOR_CS0# */
MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000
/* 1:09 MX6_DIO0 (could also be PWM1_PWM0) */
MX6Q_PAD_GPIO_9__GPIO1_IO09 0x80000000
/* 1:19 MX6_DIO1 (could also be PWM2_PWM0) */
MX6Q_PAD_SD1_DAT2__GPIO1_IO19 0x80000000
/* 2:09 MX6_DIO2 (could also be PWM3_PWM0) */
MX6Q_PAD_SD4_DAT1__GPIO2_IO09 0x80000000
/* 2:10 MX6_DIO3 (could also be PWM3_PWM0) */
MX6Q_PAD_SD4_DAT2__GPIO2_IO10 0x80000000
/* 1:16 USBHUB_RST# */
MX6Q_PAD_SD1_DAT0__GPIO1_IO16 0x80000000
/* PCIE IRQ */
MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000
/* PCIE RST */
MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x08000000
/* 1:12 MIPI_DIO */
MX6Q_PAD_SD1_DAT3__GPIO1_IO21 0x80000000
/* AUD4_MCK */
MX6Q_PAD_GPIO_0__CCM_CLKO1 0x80000000
>;
};
};
#if 0
/* ipu1: IPU1_CSI0: HDMI reciver (Digital Video In) */
ipu1 {
pinctrl_ipu1_1: ipu1grp-5 {
fsl,pins = <
MX6Q_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC
MX6Q_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN
MX6Q_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK
MX6Q_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC
MX6Q_PAD_CSI0_DAT4__IPU1_CSI0_DATA04
MX6Q_PAD_CSI0_DAT5__IPU1_CSI0_DATA05
MX6Q_PAD_CSI0_DAT6__IPU1_CSI0_DATA06
MX6Q_PAD_CSI0_DAT7__IPU1_CSI0_DATA07
MX6Q_PAD_CSI0_DAT8__IPU1_CSI0_DATA08
MX6Q_PAD_CSI0_DAT9__IPU1_CSI0_DATA09
MX6Q_PAD_CSI0_DAT10__IPU1_CSI0_DATA10
MX6Q_PAD_CSI0_DAT11__IPU1_CSI0_DATA11
MX6Q_PAD_CSI0_DAT12__IPU1_CSI0_DATA12
MX6Q_PAD_CSI0_DAT13__IPU1_CSI0_DATA13
MX6Q_PAD_CSI0_DAT14__IPU1_CSI0_DATA14
MX6Q_PAD_CSI0_DAT15__IPU1_CSI0_DATA15
MX6Q_PAD_CSI0_DAT16__IPU1_CSI0_DATA16
MX6Q_PAD_CSI0_DAT17__IPU1_CSI0_DATA17
MX6Q_PAD_CSI0_DAT18__IPU1_CSI0_DATA18
MX6Q_PAD_CSI0_DAT19__IPU1_CSI0_DATA19
>;
};
};
/* ipu2: IPU1_CSI1: Analog Video Decoder (Analog Video In) */
/* IPU2_CSI1: Analog Video Decoder (Analog Video In) */
ipu2 {
pinctrl_ipu2_1: ipu2grp-1 {
fsl,pins = <
MX6Q_PAD_EIM_A17__IPU2_CSI1_DATA12
MX6Q_PAD_EIM_D27__IPU2_CSI1_DATA13
MX6Q_PAD_EIM_D26__IPU2_CSI1_DATA14
MX6Q_PAD_EIM_D20__IPU2_CSI1_DATA15
MX6Q_PAD_EIM_D19__IPU2_CSI1_DATA16
MX6Q_PAD_EIM_D18__IPU2_CSI1_DATA17
MX6Q_PAD_EIM_D16__IPU2_CSI1_DATA18
MX6Q_PAD_EIM_EB2__IPU2_CSI1_DATA19
MX6Q_PAD_EIM_D29__IPU2_CSI1_VSYNC
MX6Q_PAD_EIM_EB3__IPU2_CSI1_HSYNC
// not sure why this causes kernel to crash in early init
// MX6Q_PAD_EIM_A16__IPU2_CSI1_PIXCLK
>;
};
};
/* ipu3: IPU2_DISP0: Analog Video Encoder (Analog Video Out) */
ipu3 {
pinctrl_ipu3_1: ipu3grp-5 {
fsl,pins = <
MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DATA00
MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DATA01
MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DATA02
MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DATA03
MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DATA04
MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DATA05
MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DATA06
MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DATA07
MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DATA08
MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DATA09
MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DATA10
MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DATA11
MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DATA12
MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DATA13
MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DATA14
MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DATA15
>;
};
};
#endif
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1_1>;
status = "okay";
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "sst,w25q256";
spi-max-frequency = <30000000>;
reg = <0>;
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_2>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_2>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_1>;
status = "okay";
};
&uart5 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5_1>;
};
&ssi1 {
fsl,mode = "i2s-slave";
status = "okay";
};
&ssi2 {
fsl,mode = "i2s-slave";
status = "okay";
};
&can1 {
reg = <0x02090000 0x4000>;
interrupts = <0 110 0x04>;
//clock-frequency
status = "okay";
};
&usbh1 {
status = "okay";
};
&pcie {
reset-gpios = <&gpio1 29 0>;
status = "okay";
eth1: sky2@8 { /* MAC/PHY on bus 8 */
compatible = "marvell,sky2";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio1 30 0>;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3_2>;
cd-gpios = <&gpio7 0 0>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux_3>;
status = "okay";
};
&i2c1 {
status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1>;
eeprom: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
};
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
};
eeprom2: eeprom@51 {
compatible = "atmel,24c02";
reg = <0x51>;
pagesize = <16>;
};
eeprom3: eeprom@52 {
compatible = "atmel,24c02";
reg = <0x52>;
pagesize = <16>;
};
eeprom4: eeprom@53 {
compatible = "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
};
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
gpio: pca9555@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
};
hwmon: gsc@29 {
compatible = "gw,gsp";
reg = <0x29>;
};
};
&i2c2 {
status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_2>;
pmic: pfuze@08 {
compatible = "fsl,pfuze100";
reg = <0x0a>;
};
pciswitch: pex8609@3f {
compatible = "plx,pex8609";
reg = <0x3f>;
};
pciclkgen: si52147@6b {
compatible = "sil,si52147";
reg = <0x6b>;
};
};
&i2c3 {
status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3_2>;
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 169>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;
};
accelerometer: mma8450@1c {
compatible = "fsl,mma8450";
reg = <0x1c>;
};
videoout: adv7393@2a {
compatible = "adi,adv7393";
reg = <0x2a>;
};
videoin: adv7180@20 {
compatible = "adi,adv7180";
reg = <0x20>;
};
hdmiin: adv7611@4c {
compatible = "adi,adv7611";
reg = <0x4c>;
};
touchscreen: egalax_ts@04 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
wakeup-gpios = <&gpio1 12 0>;
};
};
&ldb {
status = "okay";
lvds-channel@0 {
crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
};
};
Reference in New Issue View Git Blame Copy Permalink