openwrt

mr/openwrt

Go to file

Gabor Juhos 4c8aa29833 remove AR71XX_EARLY_SERIAL stuff SVN-Revision: 17400		2009-08-25 17:13:12 +00:00
docs	configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450 )	2009-07-05 11:17:49 +00:00
include	change HOST_STAMP_PREPARED for toolchain builds to make sure that added/removed patches do not trigger partial toolchain rebuilds	2009-08-24 23:22:28 +00:00
package	udevtrigger: replace the non-portable tar options used to prevent a namespace conflict with a change to PKG_BUILD_DIR. fixes build on non-gnu systems	2009-08-24 23:22:32 +00:00
scripts	fix breakage introduced with [17394]	2009-08-25 11:56:27 +00:00
target	remove AR71XX_EARLY_SERIAL stuff	2009-08-25 17:13:12 +00:00
toolchain	add a heavily cleaned up version of ubicom32 toolchain support	2009-08-21 22:31:47 +00:00
tools	make quilt installation work on cygwin	2009-08-25 14:55:18 +00:00
.gitignore	add logs/ to .gitignore	2009-04-24 01:04:57 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	add menuconfig option for selecting initramfs compression	2009-08-16 05:35:34 +00:00
feeds.conf.default	switch to LuCI 0.9.x branch	2009-06-10 23:55:19 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	2009-05-28 18:40:37 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
rules.mk	move the package dir to bin/packages/$(BOARD)_$(LIBC)-$(LIBCV) to prevent multiple configs with the same arch from deleting each others' packages	2009-08-20 15:31:17 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org