532 lines
14 KiB
Diff
532 lines
14 KiB
Diff
--- a/arch/mips/ath79/mach-ubnt-xm.c
|
|
+++ b/arch/mips/ath79/mach-ubnt-xm.c
|
|
@@ -12,16 +12,24 @@
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
+#include <linux/platform_device.h>
|
|
#include <linux/ath9k_platform.h>
|
|
+#include <linux/etherdevice.h>
|
|
+#include <linux/ar8216_platform.h>
|
|
|
|
+#include <asm/mach-ath79/ath79.h>
|
|
#include <asm/mach-ath79/irq.h>
|
|
+#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
+#include "common.h"
|
|
#include "dev-ap9x-pci.h"
|
|
+#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
+#include "dev-usb.h"
|
|
+#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
-#include "pci.h"
|
|
|
|
#define UBNT_XM_GPIO_LED_L1 0
|
|
#define UBNT_XM_GPIO_LED_L2 1
|
|
@@ -37,19 +45,19 @@
|
|
|
|
static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
|
|
{
|
|
- .name = "ubnt-xm:red:link1",
|
|
+ .name = "ubnt:red:link1",
|
|
.gpio = UBNT_XM_GPIO_LED_L1,
|
|
.active_low = 0,
|
|
}, {
|
|
- .name = "ubnt-xm:orange:link2",
|
|
+ .name = "ubnt:orange:link2",
|
|
.gpio = UBNT_XM_GPIO_LED_L2,
|
|
.active_low = 0,
|
|
}, {
|
|
- .name = "ubnt-xm:green:link3",
|
|
+ .name = "ubnt:green:link3",
|
|
.gpio = UBNT_XM_GPIO_LED_L3,
|
|
.active_low = 0,
|
|
}, {
|
|
- .name = "ubnt-xm:green:link4",
|
|
+ .name = "ubnt:green:link4",
|
|
.gpio = UBNT_XM_GPIO_LED_L4,
|
|
.active_low = 0,
|
|
},
|
|
@@ -66,9 +74,13 @@ static struct gpio_keys_button ubnt_xm_g
|
|
}
|
|
};
|
|
|
|
+#define UBNT_M_WAN_PHYMASK BIT(4)
|
|
+
|
|
static void __init ubnt_xm_init(void)
|
|
{
|
|
u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
|
|
+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
+ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
|
|
ubnt_xm_leds_gpio);
|
|
@@ -79,9 +91,428 @@ static void __init ubnt_xm_init(void)
|
|
|
|
ath79_register_m25p80(NULL);
|
|
ap91_pci_init(eeprom, NULL);
|
|
+
|
|
+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
|
|
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
|
|
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
|
|
+ ath79_register_eth(0);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_UBNT_XM,
|
|
"UBNT-XM",
|
|
"Ubiquiti Networks XM (rev 1.0) board",
|
|
ubnt_xm_init);
|
|
+
|
|
+MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M",
|
|
+ ubnt_xm_init);
|
|
+
|
|
+static void __init ubnt_rocket_m_setup(void)
|
|
+{
|
|
+ ubnt_xm_init();
|
|
+ ath79_register_usb();
|
|
+}
|
|
+
|
|
+MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M",
|
|
+ ubnt_rocket_m_setup);
|
|
+
|
|
+static void __init ubnt_nano_m_setup(void)
|
|
+{
|
|
+ ubnt_xm_init();
|
|
+ ath79_register_eth(1);
|
|
+}
|
|
+
|
|
+MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M",
|
|
+ ubnt_nano_m_setup);
|
|
+
|
|
+static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = {
|
|
+ {
|
|
+ .name = "ubnt:green:globe",
|
|
+ .gpio = 0,
|
|
+ .active_low = 1,
|
|
+ }, {
|
|
+ .name = "ubnt:green:power",
|
|
+ .gpio = 11,
|
|
+ .active_low = 1,
|
|
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
+ }
|
|
+};
|
|
+
|
|
+static void __init ubnt_airrouter_setup(void)
|
|
+{
|
|
+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
|
|
+
|
|
+ ath79_register_m25p80(NULL);
|
|
+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
|
|
+
|
|
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
|
|
+ ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1);
|
|
+
|
|
+ ath79_register_eth(1);
|
|
+ ath79_register_eth(0);
|
|
+ ath79_register_usb();
|
|
+
|
|
+ ap91_pci_init(ee, NULL);
|
|
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio),
|
|
+ ubnt_airrouter_leds_gpio);
|
|
+
|
|
+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
|
|
+ ARRAY_SIZE(ubnt_xm_gpio_keys),
|
|
+ ubnt_xm_gpio_keys);
|
|
+}
|
|
+
|
|
+MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter",
|
|
+ ubnt_airrouter_setup);
|
|
+
|
|
+static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = {
|
|
+ {
|
|
+ .name = "ubnt:orange:dome",
|
|
+ .gpio = 1,
|
|
+ .active_low = 0,
|
|
+ }, {
|
|
+ .name = "ubnt:green:dome",
|
|
+ .gpio = 0,
|
|
+ .active_low = 0,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct gpio_led ubnt_unifi_outdoor_leds_gpio[] __initdata = {
|
|
+ {
|
|
+ .name = "ubnt:orange:front",
|
|
+ .gpio = 1,
|
|
+ .active_low = 0,
|
|
+ }, {
|
|
+ .name = "ubnt:green:front",
|
|
+ .gpio = 0,
|
|
+ .active_low = 0,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct gpio_led ubnt_unifi_outdoor_plus_leds_gpio[] __initdata = {
|
|
+ {
|
|
+ .name = "ubnt:white:front",
|
|
+ .gpio = 1,
|
|
+ .active_low = 0,
|
|
+ }, {
|
|
+ .name = "ubnt:blue:front",
|
|
+ .gpio = 0,
|
|
+ .active_low = 0,
|
|
+ }
|
|
+};
|
|
+
|
|
+
|
|
+static void __init ubnt_unifi_setup(void)
|
|
+{
|
|
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
|
|
+
|
|
+ ath79_register_m25p80(NULL);
|
|
+
|
|
+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
|
|
+
|
|
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
|
|
+ ath79_register_eth(0);
|
|
+
|
|
+ ap91_pci_init(ee, NULL);
|
|
+
|
|
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio),
|
|
+ ubnt_unifi_leds_gpio);
|
|
+
|
|
+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
|
|
+ ARRAY_SIZE(ubnt_xm_gpio_keys),
|
|
+ ubnt_xm_gpio_keys);
|
|
+}
|
|
+
|
|
+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi",
|
|
+ ubnt_unifi_setup);
|
|
+
|
|
+
|
|
+#define UBNT_UNIFIOD_PRI_PHYMASK BIT(4)
|
|
+#define UBNT_UNIFIOD_2ND_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3))
|
|
+
|
|
+static void __init ubnt_unifi_outdoor_setup(void)
|
|
+{
|
|
+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
+ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
|
|
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
|
|
+
|
|
+ ath79_register_m25p80(NULL);
|
|
+
|
|
+ ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
|
|
+ UBNT_UNIFIOD_2ND_PHYMASK));
|
|
+
|
|
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
|
|
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
|
|
+ ath79_register_eth(0);
|
|
+ ath79_register_eth(1);
|
|
+
|
|
+ ap91_pci_init(ee, NULL);
|
|
+
|
|
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_leds_gpio),
|
|
+ ubnt_unifi_outdoor_leds_gpio);
|
|
+
|
|
+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
|
|
+ ARRAY_SIZE(ubnt_xm_gpio_keys),
|
|
+ ubnt_xm_gpio_keys);
|
|
+}
|
|
+
|
|
+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20",
|
|
+ "Ubiquiti UniFiAP Outdoor",
|
|
+ ubnt_unifi_outdoor_setup);
|
|
+
|
|
+
|
|
+static void __init ubnt_unifi_outdoor_plus_setup(void)
|
|
+{
|
|
+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
+ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
|
|
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
|
|
+
|
|
+ ath79_register_m25p80(NULL);
|
|
+
|
|
+ ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
|
|
+ UBNT_UNIFIOD_2ND_PHYMASK));
|
|
+
|
|
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
|
|
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
|
|
+ ath79_register_eth(0);
|
|
+ ath79_register_eth(1);
|
|
+
|
|
+ ap91_pci_init(ee, NULL);
|
|
+
|
|
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_plus_leds_gpio),
|
|
+ ubnt_unifi_outdoor_plus_leds_gpio);
|
|
+
|
|
+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
|
|
+ ARRAY_SIZE(ubnt_xm_gpio_keys),
|
|
+ ubnt_xm_gpio_keys);
|
|
+}
|
|
+
|
|
+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, "UBNT-UOP",
|
|
+ "Ubiquiti UniFiAP Outdoor+",
|
|
+ ubnt_unifi_outdoor_plus_setup);
|
|
+
|
|
+
|
|
+static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = {
|
|
+ {
|
|
+ .name = "ubnt:white:dome",
|
|
+ .gpio = 12,
|
|
+ }, {
|
|
+ .name = "ubnt:blue:dome",
|
|
+ .gpio = 13,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct gpio_keys_button uap_pro_gpio_keys[] __initdata = {
|
|
+ {
|
|
+ .desc = "reset",
|
|
+ .type = EV_KEY,
|
|
+ .code = KEY_RESTART,
|
|
+ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
|
|
+ .gpio = 17,
|
|
+ .active_low = 1,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct ar8327_pad_cfg uap_pro_ar8327_pad0_cfg = {
|
|
+ .mode = AR8327_PAD_MAC_RGMII,
|
|
+ .txclk_delay_en = true,
|
|
+ .rxclk_delay_en = true,
|
|
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
|
|
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
|
|
+};
|
|
+
|
|
+static struct ar8327_platform_data uap_pro_ar8327_data = {
|
|
+ .pad0_cfg = &uap_pro_ar8327_pad0_cfg,
|
|
+ .port0_cfg = {
|
|
+ .force_link = 1,
|
|
+ .speed = AR8327_PORT_SPEED_1000,
|
|
+ .duplex = 1,
|
|
+ .txpause = 1,
|
|
+ .rxpause = 1,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct mdio_board_info uap_pro_mdio0_info[] = {
|
|
+ {
|
|
+ .bus_id = "ag71xx-mdio.0",
|
|
+ .phy_addr = 0,
|
|
+ .platform_data = &uap_pro_ar8327_data,
|
|
+ },
|
|
+};
|
|
+
|
|
+#define UAP_PRO_MAC0_OFFSET 0x0000
|
|
+#define UAP_PRO_MAC1_OFFSET 0x0006
|
|
+#define UAP_PRO_WMAC_CALDATA_OFFSET 0x1000
|
|
+#define UAP_PRO_PCI_CALDATA_OFFSET 0x5000
|
|
+
|
|
+static void __init ubnt_uap_pro_setup(void)
|
|
+{
|
|
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
+
|
|
+ ath79_register_m25p80(NULL);
|
|
+
|
|
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_uap_pro_gpio_leds),
|
|
+ ubnt_uap_pro_gpio_leds);
|
|
+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
|
|
+ ARRAY_SIZE(uap_pro_gpio_keys),
|
|
+ uap_pro_gpio_keys);
|
|
+
|
|
+ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
|
|
+ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
|
|
+
|
|
+ ath79_register_mdio(0, 0x0);
|
|
+ mdiobus_register_board_info(uap_pro_mdio0_info,
|
|
+ ARRAY_SIZE(uap_pro_mdio0_info));
|
|
+
|
|
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
|
|
+ ath79_init_mac(ath79_eth0_data.mac_addr,
|
|
+ eeprom + UAP_PRO_MAC0_OFFSET, 0);
|
|
+
|
|
+ /* GMAC0 is connected to an AR8327 switch */
|
|
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
+ ath79_eth0_data.phy_mask = BIT(0);
|
|
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
|
|
+ ath79_register_eth(0);
|
|
+}
|
|
+
|
|
+MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
|
|
+ ubnt_uap_pro_setup);
|
|
+
|
|
+#define UBNT_XW_GPIO_LED_L1 11
|
|
+#define UBNT_XW_GPIO_LED_L2 16
|
|
+#define UBNT_XW_GPIO_LED_L3 13
|
|
+#define UBNT_XW_GPIO_LED_L4 14
|
|
+
|
|
+static struct gpio_led ubnt_xw_leds_gpio[] __initdata = {
|
|
+ {
|
|
+ .name = "ubnt:red:link1",
|
|
+ .gpio = UBNT_XW_GPIO_LED_L1,
|
|
+ .active_low = 1,
|
|
+ }, {
|
|
+ .name = "ubnt:orange:link2",
|
|
+ .gpio = UBNT_XW_GPIO_LED_L2,
|
|
+ .active_low = 1,
|
|
+ }, {
|
|
+ .name = "ubnt:green:link3",
|
|
+ .gpio = UBNT_XW_GPIO_LED_L3,
|
|
+ .active_low = 1,
|
|
+ }, {
|
|
+ .name = "ubnt:green:link4",
|
|
+ .gpio = UBNT_XW_GPIO_LED_L4,
|
|
+ .active_low = 1,
|
|
+ },
|
|
+};
|
|
+
|
|
+static void __init ubnt_xw_init(void)
|
|
+{
|
|
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
+
|
|
+ ath79_register_m25p80(NULL);
|
|
+
|
|
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
|
|
+ ubnt_xw_leds_gpio);
|
|
+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
|
|
+ ARRAY_SIZE(ubnt_xm_gpio_keys),
|
|
+ ubnt_xm_gpio_keys);
|
|
+
|
|
+ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
|
|
+ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
|
|
+
|
|
+
|
|
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE);
|
|
+ ath79_init_mac(ath79_eth0_data.mac_addr,
|
|
+ eeprom + UAP_PRO_MAC0_OFFSET, 0);
|
|
+
|
|
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
|
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
+}
|
|
+
|
|
+static void __init ubnt_nano_m_xw_setup(void)
|
|
+{
|
|
+ ubnt_xw_init();
|
|
+
|
|
+ /* GMAC0 is connected to an AR8326 switch */
|
|
+ ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
|
|
+ ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5));
|
|
+ ath79_eth0_data.speed = SPEED_100;
|
|
+ ath79_eth0_data.duplex = DUPLEX_FULL;
|
|
+ ath79_register_eth(0);
|
|
+}
|
|
+
|
|
+static void __init ubnt_loco_m_xw_setup(void)
|
|
+{
|
|
+ ubnt_xw_init();
|
|
+
|
|
+ ath79_register_mdio(0, ~BIT(1));
|
|
+ ath79_eth0_data.phy_mask = BIT(1);
|
|
+ ath79_register_eth(0);
|
|
+}
|
|
+
|
|
+MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
|
|
+ ubnt_nano_m_xw_setup);
|
|
+
|
|
+MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
|
|
+ ubnt_loco_m_xw_setup);
|
|
+
|
|
+static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = {
|
|
+ {
|
|
+ .name = "ubnt:blue:wlan",
|
|
+ .gpio = 0,
|
|
+ }, {
|
|
+ .name = "ubnt:white:status",
|
|
+ .gpio = 1,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct gpio_keys_button airgateway_gpio_keys[] __initdata = {
|
|
+ {
|
|
+ .desc = "reset",
|
|
+ .type = EV_KEY,
|
|
+ .code = KEY_RESTART,
|
|
+ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
|
|
+ .gpio = 12,
|
|
+ .active_low = 1,
|
|
+ }
|
|
+};
|
|
+
|
|
+static void __init ubnt_airgateway_setup(void)
|
|
+{
|
|
+ u32 t;
|
|
+ u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
|
|
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
|
|
+
|
|
+
|
|
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
|
|
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
|
|
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
|
|
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
|
|
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
|
|
+
|
|
+ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
|
|
+ t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
|
|
+ ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
|
|
+
|
|
+ ath79_register_m25p80(NULL);
|
|
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_gpio_leds),
|
|
+ ubnt_airgateway_gpio_leds);
|
|
+
|
|
+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
|
|
+ ARRAY_SIZE(airgateway_gpio_keys),
|
|
+ airgateway_gpio_keys);
|
|
+
|
|
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0);
|
|
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
|
|
+
|
|
+ ath79_register_mdio(0, 0x0);
|
|
+
|
|
+ ath79_register_eth(1);
|
|
+ ath79_register_eth(0);
|
|
+
|
|
+ ath79_register_wmac(ee, NULL);
|
|
+}
|
|
+
|
|
+MIPS_MACHINE(ATH79_MACH_UBNT_AIRGW, "UBNT-AGW", "Ubiquiti AirGateway",
|
|
+ ubnt_airgateway_setup);
|
|
+
|
|
--- a/arch/mips/ath79/Kconfig
|
|
+++ b/arch/mips/ath79/Kconfig
|
|
@@ -68,12 +68,16 @@ config ATH79_MACH_PB44
|
|
Atheros PB44 reference board.
|
|
|
|
config ATH79_MACH_UBNT_XM
|
|
- bool "Ubiquiti Networks XM (rev 1.0) board"
|
|
+ bool "Ubiquiti Networks XM/UniFi boards"
|
|
select SOC_AR724X
|
|
+ select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
+ select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
+ select ATH79_DEV_USB
|
|
+ select ATH79_DEV_WMAC
|
|
help
|
|
Say 'Y' here if you want your kernel to support the
|
|
Ubiquiti Networks XM (rev 1.0) board.
|
|
--- a/arch/mips/ath79/machtypes.h
|
|
+++ b/arch/mips/ath79/machtypes.h
|
|
@@ -22,6 +22,13 @@ enum ath79_mach_type {
|
|
ATH79_MACH_AP81, /* Atheros AP81 reference board */
|
|
ATH79_MACH_DB120, /* Atheros DB120 reference board */
|
|
ATH79_MACH_PB44, /* Atheros PB44 reference board */
|
|
+ ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
|
|
+ ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
|
|
+ ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
|
|
+ ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
|
|
+ ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */
|
|
+ ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
|
|
+ ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */
|
|
ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
|
|
};
|
|
|