openwrt/target/linux/ramips/dts/ALL5003.dts
John Crispin b77e92e020 ramips: ethernet mac cleanup
Compile tested all subtargets and profiles.
Unfortunately I don't own any board affected by these changes, so no run tests.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41839
2014-07-26 20:36:09 +00:00

110 lines
1.7 KiB
Plaintext

/dts-v1/;
/include/ "rt5350.dtsi"
/ {
compatible = "ALL5003", "ralink,rt5350-soc";
model = "Allnet ALL5003";
palmbus@10000000 {
gpio0: gpio@600 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l25635e";
reg = <0 0>;
linux,modalias = "m25p80", "mx25l25635e";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x1fb0000>;
};
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
mtd-mac-address = <&factory 0x28>;
};
esw@10110000 {
ralink,portmap = <0x3f>;
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
i2c-gpio {
compatible = "i2c-gpio";
gpios = <&gpio0 1 0 &gpio0 2 0>;
i2c-gpio,delay-us = <10>;
pcf0: iexp@38 {
#gpio-cells = <2>;
compatible = "inxp,pcf8574a";
reg = <0x38>;
gpio-controller;
};
hwmon@4b {
compatible = "national,lm92";
reg = <0x4b>;
};
};
gpio-leds {
compatible = "gpio-leds";
ld1 {
label = "allnet:green:ld1";
gpios = <&pcf0 0 1>;
};
ld2 {
label = "allnet:green:ld2";
gpios = <&pcf0 1 1>;
};
};
};