openwrt

mr/openwrt

Go to file

Gabor Juhos 5a8c63b47e base-files: add macaddr_{add,2bin,setbit_la} helpers Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35614		2013-02-16 11:50:22 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	kernel: update linux 3.7 to 3.7.8	2013-02-15 07:36:15 +00:00
package	base-files: add macaddr_{add,2bin,setbit_la} helpers	2013-02-16 11:50:22 +00:00
scripts	scripts: bundle-libraries.sh: support mixing 32bit and 64bit binaries	2013-01-28 15:54:27 +00:00
target	ramips: use the mtd_get_mac_* helpers	2013-02-16 11:50:21 +00:00
toolchain	toolchain/eglibc: add support for 2.17	2013-02-07 17:34:53 +00:00
tools	firmware-utils/mktplinkfw: add support for the TL-WDR4900 v1	2013-02-13 16:51:24 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	allow using sstrip with musl	2013-01-29 23:05:43 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	build: it is no longer necessary to call make target/linux/clean as part of make clean	2012-12-02 15:26:28 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
rules.mk	rules.mk: only select latest libgcc.a with wildcard match (#12798 )	2013-01-13 20:59:51 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org