openwrt/target/linux/gemini/patches-3.10/150-gemini-pata.patch
John Crispin 5789169b1d gemini: add ata driver
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43885
2015-01-08 20:26:34 +00:00

193 lines
5.3 KiB
Diff

--- a/arch/arm/mach-gemini/include/mach/global_reg.h
+++ b/arch/arm/mach-gemini/include/mach/global_reg.h
@@ -227,7 +227,13 @@
#define USB0_PLUG_MINIB (1 << 29)
#define GMAC_GMII (1 << 28)
#define GMAC_1_ENABLE (1 << 27)
-/* TODO: define ATA/SATA bits */
+/* 011 - ata0 <-> sata0, sata1; bring out ata1
+ * 010 - ata1 <-> sata1, sata0; bring out ata0
+ * 001 - ata0 <-> sata0, ata1 <-> sata1; bring out ata1
+ * 000 - ata0 <-> sata0, ata1 <-> sata1; bring out ata0 */
+#define IDE_IOMUX_MASK (7 << 24)
+#define IDE_IOMUX_SATA1_SATA0 (2 << 24)
+#define IDE_IOMUX_SATA0_SATA1 (3 << 24)
#define USB1_VBUS_ON (1 << 23)
#define USB0_VBUS_ON (1 << 22)
#define APB_CLKOUT_ENABLE (1 << 21)
--- a/arch/arm/mach-gemini/irq.c 2013-02-19 13:38:13.263948000 +0100
+++ b/arch/arm/mach-gemini/irq.c 2013-02-19 18:24:02.912997292 +0100
@@ -88,6 +88,9 @@
irq_set_handler(i, handle_edge_irq);
mode |= 1 << i;
level |= 1 << i;
+ } else if (i >= IRQ_IDE0 && i <= IRQ_IDE1) {
+ irq_set_handler(i, handle_edge_irq);
+ mode |= 1 << i;
} else {
irq_set_handler(i, handle_level_irq);
}
--- a/arch/arm/mach-gemini/common.h
+++ b/arch/arm/mach-gemini/common.h
@@ -29,6 +29,7 @@
extern int platform_register_watchdog(void);
extern int platform_register_ethernet(struct gemini_gmac_platform_data *pdata);
extern int platform_register_usb(unsigned int id);
+extern int platform_register_pata(unsigned int id);
extern void gemini_restart(char mode, const char *cmd);
--- a/arch/arm/mach-gemini/devices.c
+++ b/arch/arm/mach-gemini/devices.c
@@ -249,3 +249,67 @@
return platform_device_register(&usb_device[id]);
}
+static u64 pata_gemini_dmamask0 = 0xffffffffUL;
+static u64 pata_gemini_dmamask1 = 0xffffffffUL;
+
+static struct resource pata_gemini_resources0[] =
+{
+ [0] = {
+ .start = GEMINI_IDE0_BASE,
+ .end = GEMINI_IDE0_BASE + 0x40,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IDE0,
+ .end = IRQ_IDE0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource pata_gemini_resources1[] =
+{
+ [0] = {
+ .start = GEMINI_IDE1_BASE,
+ .end = GEMINI_IDE1_BASE + 0x40,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IDE1,
+ .end = IRQ_IDE1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device pata_gemini_devices[] =
+{
+ {
+ .name = "pata-gemini",
+ .id = 0,
+ .dev =
+ {
+ .dma_mask = &pata_gemini_dmamask0,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pata_gemini_resources0),
+ .resource = pata_gemini_resources0,
+ },
+ {
+ .name = "pata-gemini",
+ .id = 1,
+ .dev =
+ {
+ .dma_mask = &pata_gemini_dmamask1,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pata_gemini_resources1),
+ .resource = pata_gemini_resources1,
+ },
+};
+
+int __init platform_register_pata(unsigned int id)
+{
+ if (id > 1)
+ return -EINVAL;
+
+ return platform_device_register(&pata_gemini_devices[id]);
+}
--- a/arch/arm/mach-gemini/mm.c
+++ b/arch/arm/mach-gemini/mm.c
@@ -24,6 +24,11 @@
.length = SZ_512K,
.type = MT_DEVICE,
}, {
+ .virtual = (unsigned long)IO_ADDRESS(GEMINI_SATA_BASE),
+ .pfn = __phys_to_pfn(GEMINI_SATA_BASE),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
.virtual = (unsigned long)IO_ADDRESS(GEMINI_UART_BASE),
.pfn = __phys_to_pfn(GEMINI_UART_BASE),
.length = SZ_512K,
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -433,6 +433,16 @@ config PATA_EFAR
If unsure, say N.
+config PATA_GEMINI
+ tristate "Gemini PATA support (Experimental)"
+ depends on ARCH_GEMINI
+ help
+ This option enables support for the Gemini PATA-Controller.
+ Note that the Gemini SoC has no native SATA-Controller but an
+ onboard PATA-SATA bridge.
+
+ If unsure, say N.
+
config PATA_HPT366
tristate "HPT 366/368 PATA support"
depends on PCI
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -45,6 +45,7 @@
obj-$(CONFIG_PATA_CYPRESS) += pata_cypress.o
obj-$(CONFIG_PATA_EFAR) += pata_efar.o
obj-$(CONFIG_PATA_EP93XX) += pata_ep93xx.o
+obj-$(CONFIG_PATA_GEMINI) += pata_gemini.o
obj-$(CONFIG_PATA_HPT366) += pata_hpt366.o
obj-$(CONFIG_PATA_HPT37X) += pata_hpt37x.o
obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o
--- a/arch/arm/mach-gemini/board-nas4220b.c
+++ b/arch/arm/mach-gemini/board-nas4220b.c
@@ -146,11 +146,28 @@
GLOBAL_MISC_CTRL));
}
+static void __init sata_ib4220b_init(void)
+{
+ unsigned val;
+
+ val = readl((void __iomem*)(IO_ADDRESS(GEMINI_GLOBAL_BASE) +
+ GLOBAL_MISC_CTRL));
+ val &= ~(IDE_IOMUX_MASK | PFLASH_PADS_DISABLE);
+ val |= IDE_PADS_ENABLE;
+ writel(val, (void __iomem*)(IO_ADDRESS(GEMINI_GLOBAL_BASE) +
+ GLOBAL_MISC_CTRL));
+
+ /* enabling ports for presence detection, master only */
+ writel(0x00000001, (void __iomem*)(IO_ADDRESS(GEMINI_SATA_BASE) + 0x18));
+ writel(0x00000001, (void __iomem*)(IO_ADDRESS(GEMINI_SATA_BASE) + 0x1c));
+}
+
static void __init ib4220b_init(void)
{
gemini_gpio_init();
ib4220b_gmac_init();
usb_ib4220b_init();
+ sata_ib4220b_init();
platform_register_uart();
platform_register_pflash(SZ_16M, NULL, 0);
platform_device_register(&ib4220b_led_device);
@@ -161,6 +178,8 @@
platform_register_ethernet(&ib4220b_gmac_data);
platform_register_usb(0);
platform_register_usb(1);
+ platform_register_pata(0);
+ platform_register_pata(1);
}
MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")