mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
5f3f1b8cd8
openwrt/target/linux/ar71xx/base-files/etc/defconfig
History
Felix Fietkau 5f3f1b8cd8 ar71xx: Configure WNDR3700 switch LED colors properly (#8103) 
For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on
the four LAN port switch LEDs. The LEDs will be lit to indicate a link
and will blink to indicate activity. This matches the stock firmware
and the description printed on the label on the unit's underside.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 23879
2010-11-04 18:55:16 +00:00
..
ap81 ap81: register ethernet devices, and add default network configuration file 2009-03-17 18:07:16 +00:00
ap83 add default network configuration for the AP83 board 2009-06-06 16:01:09 +00:00
ap96 Add support for Atheros AP96 reference board 2010-09-27 08:59:53 +00:00
aw-nr580 add default network configuration for the AW-NR580 2009-02-27 20:49:51 +00:00
bullet-m ar71xx: add default network configuration for the Bullet M 2009-10-01 19:41:06 +00:00
dir-600-a1 ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563) 2010-10-14 00:14:59 +00:00
dir-615-c1 ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards 2010-04-09 08:40:09 +00:00
dir-825-b1 fix dir-825-b1 default network config after r21905 2010-07-01 00:03:43 +00:00
eap7660d ar71xx: add support for the Senao EAP7660D board 2010-06-18 16:22:05 +00:00
generic defconfig: move defaults from /etc/config/defaults/ to /etc/defconfig/, previous location broke uci 2009-02-26 05:54:07 +00:00
jwap003 ar71xx: initial support for jjPlus JWAP003 2010-10-01 07:09:29 +00:00
mzk-w04nu defconfig: move defaults from /etc/config/defaults/ to /etc/defconfig/, previous location broke uci 2009-02-26 05:54:07 +00:00
pb42 pb42: fix ethernet, remove USB registration, add default network configuration 2009-03-14 18:28:33 +00:00
pb44 ar71xx: add default network configuration for the PB44 board 2010-03-09 18:05:58 +00:00
rb-411 add default network configuration for the RB-411 board 2009-02-28 18:55:46 +00:00
rb-433 ar71xx: add default network configuration file for the RB450/RB433 boards 2010-06-08 20:19:23 +00:00
rb-433u ar71xx: add default network config for the RB433UAH board 2010-06-12 13:20:41 +00:00
rb-450 ar71xx: add default network configuration file for the RB450/RB433 boards 2010-06-08 20:19:23 +00:00
rb-450g Add support for the ar8316 switch. This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices. 2010-04-05 23:03:16 +00:00
rb-750 ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new switch driver 2010-10-14 13:41:42 +00:00
routerstation ar71xx: add default network configuration for RS and RS-Pro 2009-10-20 19:36:47 +00:00
routerstation-pro Add support for the ar8316 switch. This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices. 2010-04-05 23:03:16 +00:00
tew-632brp ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards 2010-04-09 08:40:09 +00:00
tl-wa901nd ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528, without the ethernet fifo cfg values) 2010-07-22 12:37:44 +00:00
tl-wr741nd ar71xx: add a new driver for the ar7240 switch using swconfig. hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563 2010-08-16 19:21:57 +00:00
tl-wr841n-v1 ar71xx: add missing protocol definitions to default network configurations 2010-03-09 18:05:31 +00:00
tl-wr941nd ar71xx: add missing protocol definitions to default network configurations 2010-03-09 18:05:31 +00:00
tl-wr1043nd ar71xx: add default network configuration file for the TL-WR1043ND board 2010-02-24 13:39:20 +00:00
wndr3700 ar71xx: Configure WNDR3700 switch LED colors properly (#8103) 2010-11-04 18:55:16 +00:00
wnr2000 wnr2000: enable ar8216 workaround, add network config. LAN ports now work 2009-02-26 05:54:32 +00:00
wp543 ar71xx: add default network configuration file for the WP543 board 2009-10-20 12:59:45 +00:00
wrt160nl adjust switch default configs for the swconfig api change 2010-01-18 00:38:08 +00:00
wzr-hp-g300nh ar71xx: don't use vlan 0 for devices with rtl8366s switch 2010-06-26 19:15:32 +00:00