mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
646342f30f
openwrt/target/linux/magicbox-2.6/patches/001-magicbox_support.patch
Felix Fietkau 60c1f0f64d finally move buildroot-ng to trunk
2016-03-20 17:29:15 +01:00

373 lines
12 KiB
Diff
Raw Blame History

diff -Nur linux-2.6.17/arch/ppc/platforms/4xx/Kconfig linux-2.6.17-owrt/arch/ppc/platforms/4xx/Kconfig
--- linux-2.6.17/arch/ppc/platforms/4xx/Kconfig 2006-06-18 03:49:35.000000000 +0200
+++ linux-2.6.17-owrt/arch/ppc/platforms/4xx/Kconfig 2006-08-25 23:33:05.000000000 +0200
@@ -52,6 +52,12 @@
help
This option enables support for the IBM PPC405GP evaluation board.
+config MAGICBOX
+ bool "MagicBox"
+ select WANT_EARLY_SERIAL
+ help
+ This option enables support for the IBM PPC405EP evaluation board.
+
config XILINX_ML300
bool "Xilinx-ML300"
help
@@ -173,7 +179,7 @@
config IBM_OCP
bool
- depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+ depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT || MAGICBOX
default y
config IBM_EMAC4
@@ -183,7 +189,7 @@
config BIOS_FIXUP
bool
- depends on BUBINGA || EP405 || SYCAMORE || WALNUT
+ depends on BUBINGA || EP405 || SYCAMORE || WALNUT || MAGICBOX
default y
# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
@@ -194,7 +200,7 @@
config 405EP
bool
- depends on BUBINGA
+ depends on BUBINGA || MAGICBOX
default y
config 405GP
diff -Nur linux-2.6.17/arch/ppc/platforms/4xx/magicbox.c linux-2.6.17-owrt/arch/ppc/platforms/4xx/magicbox.c
--- linux-2.6.17/arch/ppc/platforms/4xx/magicbox.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.17-owrt/arch/ppc/platforms/4xx/magicbox.c 2006-08-25 23:33:05.000000000 +0200
@@ -0,0 +1,249 @@
+/*
+ * Support for IBM PPC 405EP-based MagicBox board
+ * Copyright (C) 2006 Karol Lewandowski
+ *
+ * Heavily based on bubinga.c
+ *
+ * Author: SAW (IBM), derived from walnut.c.
+ * Maintained by MontaVista Software <source@mvista.com>
+ *
+ * 2003 (c) MontaVista Softare Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/blkdev.h>
+#include <linux/pci.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <asm/system.h>
+#include <asm/pci-bridge.h>
+#include <asm/processor.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/kgdb.h>
+#include <asm/ocp.h>
+#include <asm/ibm_ocp_pci.h>
+
+#include <platforms/4xx/ibm405ep.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+extern bd_t __res;
+
+/* Some IRQs unique to board
+ * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
+ */
+int __init
+ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ {28, 28, 28, 28}, /* IDSEL 1 - PCI slot 1 */
+ {29, 29, 29, 29}, /* IDSEL 2 - PCI slot 2 */
+ {30, 30, 30, 30}, /* IDSEL 3 - PCI slot 3 */
+ {31, 31, 31, 31}, /* IDSEL 4 - PCI slot 4 */
+ };
+
+ const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+};
+
+
+/* The serial clock for the chip is an internal clock determined by
+ * different clock speeds/dividers.
+ * Calculate the proper input baud rate and setup the serial driver.
+ */
+static void __init
+magicbox_early_serial_map(void)
+{
+ u32 uart_div;
+ int uart_clock;
+ struct uart_port port;
+
+ /* Calculate the serial clock input frequency
+ *
+ * The base baud is the PLL OUTA (provided in the board info
+ * structure) divided by the external UART Divisor, divided
+ * by 16.
+ */
+ uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
+ uart_clock = __res.bi_procfreq / uart_div;
+
+ /* Setup serial port access */
+ memset(&port, 0, sizeof(port));
+ port.membase = (void*)ACTING_UART0_IO_BASE;
+ port.irq = ACTING_UART0_INT;
+ port.uartclk = uart_clock;
+ port.regshift = 0;
+ port.iotype = SERIAL_IO_MEM;
+ port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ port.line = 0;
+
+ if (early_serial_setup(&port) != 0) {
+ printk("Early serial init of port 0 failed\n");
+ }
+
+ port.membase = (void*)ACTING_UART1_IO_BASE;
+ port.irq = ACTING_UART1_INT;
+ port.line = 1;
+
+ if (early_serial_setup(&port) != 0) {
+ printk("Early serial init of port 1 failed\n");
+ }
+}
+
+void __init
+bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
+{
+ unsigned int bar_response, bar;
+ /*
+ * Expected PCI mapping:
+ *
+ * PLB addr PCI memory addr
+ * --------------------- ---------------------
+ * 0000'0000 - 7fff'ffff <--- 0000'0000 - 7fff'ffff
+ * 8000'0000 - Bfff'ffff ---> 8000'0000 - Bfff'ffff
+ *
+ * PLB addr PCI io addr
+ * --------------------- ---------------------
+ * e800'0000 - e800'ffff ---> 0000'0000 - 0001'0000
+ *
+ * The following code is simplified by assuming that the bootrom
+ * has been well behaved in following this mapping.
+ */
+
+#ifdef DEBUG
+ int i;
+
+ printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
+ printk("PCI bridge regs before fixup \n");
+ for (i = 0; i <= 3; i++) {
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
+ }
+ printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
+ printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
+ printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
+ printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
+
+#endif
+
+ /* added for IBM boot rom version 1.15 bios bar changes -AK */
+
+ /* Disable region first */
+ out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
+ /* PLB starting addr, PCI: 0x80000000 */
+ out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
+ /* PCI start addr, 0x80000000 */
+ out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
+ /* 512MB range of PLB to PCI */
+ out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
+ /* Enable no pre-fetch, enable region */
+ out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
+ (PPC405_PCI_UPPER_MEM -
+ PPC405_PCI_MEM_BASE)) | 0x01));
+
+ /* Disable region one */
+ out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
+ out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
+ out_le32((void *) &(pcip->ptm1ms), 0x00000001);
+
+ /* Disable region two */
+ out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
+ out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
+ out_le32((void *) &(pcip->ptm2ms), 0x00000000);
+ out_le32((void *) &(pcip->ptm2la), 0x00000000);
+
+ /* Zero config bars */
+ for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
+ early_write_config_dword(hose, hose->first_busno,
+ PCI_FUNC(hose->first_busno), bar,
+ 0x00000000);
+ early_read_config_dword(hose, hose->first_busno,
+ PCI_FUNC(hose->first_busno), bar,
+ &bar_response);
+ DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
+ hose->first_busno, PCI_SLOT(hose->first_busno),
+ PCI_FUNC(hose->first_busno), bar, bar_response);
+ }
+ /* end work arround */
+
+#ifdef DEBUG
+ printk("PCI bridge regs after fixup \n");
+ for (i = 0; i <= 3; i++) {
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
+ printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
+ }
+ printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
+ printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
+ printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
+ printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
+
+#endif /* DEBUG */
+}
+
+void __init
+magicbox_setup_arch(void)
+{
+ ppc4xx_setup_arch();
+
+ ibm_ocp_set_emac(0, 1);
+
+ magicbox_early_serial_map();
+
+ /* Identify the system */
+ printk("MagicBox port (C) 2005 Karol Lewandowski <kl@jasmine.eu.org>\n");
+}
+
+void __init
+magicbox_map_io(void)
+{
+ ppc4xx_map_io();
+}
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ ppc4xx_init(r3, r4, r5, r6, r7);
+
+ ppc_md.setup_arch = magicbox_setup_arch;
+ ppc_md.setup_io_mappings = magicbox_map_io;
+
+#ifdef CONFIG_KGDB
+ ppc_md.early_serial_map = bubinga_early_serial_map;
+#endif
+
+}
diff -Nur linux-2.6.17/arch/ppc/platforms/4xx/magicbox.h linux-2.6.17-owrt/arch/ppc/platforms/4xx/magicbox.h
--- linux-2.6.17/arch/ppc/platforms/4xx/magicbox.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.17-owrt/arch/ppc/platforms/4xx/magicbox.h 2006-08-25 23:33:05.000000000 +0200
@@ -0,0 +1,47 @@
+/*
+ * Support for IBM PPC 405EP-based MagicBox board
+ *
+ * Heavily based on bubinga.h
+ *
+ *
+ * Author: SAW (IBM), derived from walnut.h.
+ * Maintained by MontaVista Software <source@mvista.com>
+ *
+ * 2003 (c) MontaVista Softare Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __MAGICBOX_H__
+#define __MAGICBOX_H__
+
+#include <linux/config.h>
+#include <platforms/4xx/ibm405ep.h>
+#include <asm/ppcboot.h>
+
+/* Memory map for the "MagicBox" 405EP evaluation board -- generic 4xx. */
+
+/* The UART clock is based off an internal clock -
+ * define BASE_BAUD based on the internal clock and divider(s).
+ * Since BASE_BAUD must be a constant, we will initialize it
+ * using clock/divider values which OpenBIOS initializes
+ * for typical configurations at various CPU speeds.
+ * The base baud is calculated as (FWDA / EXT UART DIV / 16)
+ */
+#define BASE_BAUD 0
+
+/* Flash */
+#define PPC40x_FPGA_BASE 0xF0300000
+#define PPC40x_FPGA_REG_OFFS 1 /* offset to flash map reg */
+#define PPC40x_FLASH_ONBD_N(x) (x & 0x02)
+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
+#define PPC40x_FLASH_LOW 0xFFF00000
+#define PPC40x_FLASH_HIGH 0xFFF80000
+#define PPC40x_FLASH_SIZE 0x80000
+
+#define PPC4xx_MACHINE_NAME "MagicBox"
+
+#endif /* __MAGICBOX_H__ */
+#endif /* __KERNEL__ */
diff -Nur linux-2.6.17/arch/ppc/platforms/4xx/Makefile linux-2.6.17-owrt/arch/ppc/platforms/4xx/Makefile
--- linux-2.6.17/arch/ppc/platforms/4xx/Makefile 2006-06-18 03:49:35.000000000 +0200
+++ linux-2.6.17-owrt/arch/ppc/platforms/4xx/Makefile 2006-08-25 23:33:05.000000000 +0200
@@ -13,6 +13,7 @@
obj-$(CONFIG_REDWOOD_6) += redwood6.o
obj-$(CONFIG_SYCAMORE) += sycamore.o
obj-$(CONFIG_WALNUT) += walnut.o
+obj-$(CONFIG_MAGICBOX) += magicbox.o
obj-$(CONFIG_XILINX_ML300) += xilinx_ml300.o
obj-$(CONFIG_XILINX_ML403) += xilinx_ml403.o
diff -Nur linux-2.6.17/include/asm-ppc/ibm4xx.h linux-2.6.17-owrt/include/asm-ppc/ibm4xx.h
--- linux-2.6.17/include/asm-ppc/ibm4xx.h 2006-06-18 03:49:35.000000000 +0200
+++ linux-2.6.17-owrt/include/asm-ppc/ibm4xx.h 2006-08-25 23:33:05.000000000 +0200
@@ -19,6 +19,10 @@
#ifdef CONFIG_40x
+#if defined(CONFIG_MAGICBOX)
+#include <platforms/4xx/magicbox.h>
+#endif
+
#if defined(CONFIG_BUBINGA)
#include <platforms/4xx/bubinga.h>
#endif
Reference in New Issue View Git Blame Copy Permalink