openwrt/target/linux/ar71xx/image/Makefile
Gabor Juhos 697f5d0bdd ar71xx: initial support for jjPlus JWAP003
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

(the GPIODEV code has been removed, the sysfs interface
can be used to control the GPIO lines instead - juhosg)

SVN-Revision: 23165
2010-10-01 07:09:29 +00:00

686 lines
24 KiB
Makefile

#
# Copyright (C) 2008-2010 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
define imgname
$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1)))
endef
VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux
UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage
fs_squash:=squashfs-only
fs_all:=all
fs_4k:=4k
fs_64k:=64k
fs_128k:=128k
ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
fs_squash:=initramfs
fs_all:=initramfs
fs_4k:=initramfs
fs_64k:=initramfs
fs_128k:=initramfs
VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux-initramfs
UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage-initramfs
endif
define CompressLzma
$(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2)
endef
define PatchKernelLzma
cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))'
$(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).bin.lzma)
endef
define PatchKernelGzip
cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))'
gzip -9 -c $(KDIR)/vmlinux-$(1) > $(KDIR)/vmlinux-$(1).bin.gz
endef
define MkImageLzma
mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma \
-e 0x80060000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(1) $(2)
endef
define MkImageGzip
mkimage -A mips -O linux -T kernel -a 0x80060000 -C gzip \
-e 0x80060000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(1) $(2)
endef
define Image/BuildKernel
cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
cp $(KDIR)/vmlinux $(VMLINUX).bin
gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
$(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
dd if=$(KDIR)/vmlinux.bin.lzma of=$(VMLINUX).lzma bs=65536 conv=sync
dd if=$(KDIR)/vmlinux.bin.gz of=$(VMLINUX).gz bs=65536 conv=sync
$(call MkImageGzip,$(KDIR)/vmlinux.bin.gz,$(UIMAGE)-gzip.bin)
$(call MkImageLzma,$(KDIR)/vmlinux.bin.lzma,$(UIMAGE)-lzma.bin)
$(call Image/Build/Initramfs)
endef
define Image/Build/WRT400N
$(call PatchKernelLzma,$(2),$(3))
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 1310720 ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 6488064 ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big"; \
else \
mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
0x80060000 \
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
( \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=1280k conv=sync; \
dd if=$(KDIR)/root.$(1) \
) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
wrt400n $(KDIR)/vmlinux-$(2).uImage $(KDIR)/root.$(1) $(call imgname,$(1),$(2))-factory.bin; \
fi; fi
endef
dir825b1_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,1024k(kernel),5184k(rootfs),64k(caldata)ro,1600k(unknown)ro,6208k@0x50000(firmware)
define Image/Build/DIR825B1
$(call PatchKernelLzma,$(2),$(3) $(dir825b1_mtdlayout))
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 1048576 ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 5308416 ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big"; \
else \
mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
0x80060000 \
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
( \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=1024k conv=sync; \
dd if=$(KDIR)/root.$(1) \
) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
( \
dd if=$(call imgname,$(1),$(2))-sysupgrade.bin; \
echo -n "01AP94-AR7161-RT-080619-00"; \
) > $(call imgname,$(1),$(2))-backup-loader.bin; \
if [ `stat -c%s $(call imgname,$(1),$(2))-sysupgrade.bin` -gt 4194304 ]; then \
echo "Warning: $(call imgname,$(1),$(2))-sysupgrade.bin is too big"; \
else \
( \
dd if=$(call imgname,$(1),$(2))-sysupgrade.bin bs=4096k conv=sync; \
echo -n "00AP94-AR7161-RT-080619-00"; \
) > $(call imgname,$(1),$(2))-factory.bin; \
fi; \
fi; fi
endef
define Image/Build/WZRHPG300NH
$(call PatchKernelLzma,$(2),$(3))
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 1048576 ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 31850496 ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big"; \
else \
mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
0x80060000 \
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
( \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=1024k conv=sync; \
dd if=$(KDIR)/root.$(1) bs=128k conv=sync; \
) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
( \
echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
dd if=$(call imgname,$(1),$(2))-sysupgrade.bin; \
) > $(call imgname,$(1),$(2))-tftp.bin; \
fi; fi
endef
cameo_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,896k(kernel),2944k(rootfs),64k(art)ro,3840k@0x30000(firmware)
define Image/Build/Cameo
$(call PatchKernelLzma,$(2),$(3) $(cameo_mtdlayout))
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 917504 ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 2949120 ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big"; \
else \
mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
0x80060000 \
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
( \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=896k conv=sync; \
dd if=$(KDIR)/root.$(1) \
) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
( \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=896k conv=sync; \
dd if=$(KDIR)/root.$(1) bs=2880k conv=sync; \
echo -n $(4); \
) > $(call imgname,$(1),$(2))-factory.bin; \
fi; fi
endef
cameo7240_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,896k(kernel),2816k(rootfs),64k(mac)ro,64k(art)ro,3712k@0x40000(firmware)
define Image/Build/Cameo7240
$(call PatchKernelLzma,$(2),$(3) $(cameo7240_mtdlayout))
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 917504 ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 2818048 ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big"; \
else \
mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
0x80060000 \
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
( \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=896k conv=sync; \
dd if=$(KDIR)/root.$(1) \
) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
( \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=896k conv=sync; \
dd if=$(KDIR)/root.$(1) bs=2752k conv=sync; \
echo -n $(4); \
) > $(call imgname,$(1),$(2))-factory.bin; \
fi; fi
endef
define Image/Build/AP83
$(call PatchKernelGzip,$(2),$(3))
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.gz"` -gt 1310720 ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).bin.gz is too big"; \
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 6619136 ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big"; \
else \
mkimage -A mips -O linux -T kernel -a 0x80060000 -C gzip -e \
0x80060000 \
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(KDIR)/vmlinux-$(2).bin.gz \
$(KDIR)/vmlinux-$(2).uImage; \
dd if=$(KDIR)/vmlinux-$(2).uImage \
of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
dd if=$(KDIR)/root.$(1) \
of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
( \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=1280k conv=sync; \
dd if=$(KDIR)/root.$(1); \
) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
fi; fi
endef
define Image/Build/PB92
$(call PatchKernelLzma,$(2),$(3))
if [ `stat -c%s $(KDIR)/vmlinux-$(2).bin.lzma` -gt 917504 ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
elif [ `stat -c%s $(KDIR)/root.$(1)` -gt 2818048 ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big"; \
else \
mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
0x80060000 \
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(KDIR)/vmlinux-$(2).bin.lzma \
$(KDIR)/vmlinux-$(2).uImage; \
dd if=$(KDIR)/vmlinux-$(2).uImage \
of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
dd if=$(KDIR)/root.$(1) \
of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
( \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=896k conv=sync; \
dd if=$(KDIR)/root.$(1); \
) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
fi
endef
define Image/Build/PB4X
$(call PatchKernelLzma,$(2),$(3))
dd if=$(KDIR)/vmlinux-$(2).bin.lzma \
of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync
dd if=$(KDIR)/root.$(1) \
of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync
-sh $(TOPDIR)/scripts/combined-image.sh \
"$(call imgname,kernel,$(2)).bin" \
"$(call imgname,$(1),$(2)-rootfs).bin" \
$(call imgname,$(1),$(2))-sysupgrade.bin
endef
define Image/Build/MyLoader
-$(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s $(3) \
-p0x030000:0xe0000:al:0x80060000:kernel:$(KDIR)/vmlinux.bin.lzma \
-p0x110000:0:::rootfs:$(KDIR)/root.$(1) \
$(call imgname,$(1),$(2))-$(4)-factory.img
endef
ubntxm_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1024k(kernel),6528k(rootfs),256k(cfg)ro,64k(EEPROM)ro,7552k@0x50000(firmware)
define Image/Build/UBNTXM
$(call PatchKernelLzma,$(2),$(3) $(ubntxm_mtdlayout))
$(call MkImageLzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(KDIR)/vmlinux-$(2).uImage.bin)
dd if=$(KDIR)/vmlinux-$(2).uImage.bin of=$(KDIR)/vmlinux-$(2).uImage bs=1024k conv=sync
-$(STAGING_DIR_HOST)/bin/mkfwimage \
-B $(4) -v $(5).$(6).OpenWrt.$(REVISION) \
-k $(KDIR)/vmlinux-$(2).uImage \
-r $(BIN_DIR)/$(IMG_PREFIX)-root.$(1) \
-o $(call imgname,$(1),$(2))-factory.bin
( \
dd if=$(KDIR)/vmlinux-$(2).uImage; \
dd if=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1); \
) > $(call imgname,$(1),$(2))-sysupgrade.bin
endef
define Image/Build/UBNT
$(call PatchKernelLzma,$(2),$(3))
dd if=$(KDIR)/vmlinux-$(2).bin.lzma of=$(KDIR)/vmlinux-$(2).lzma bs=64k conv=sync
-$(STAGING_DIR_HOST)/bin/mkfwimage \
-B $(4) -v $(5).$(6).OpenWrt.$(REVISION) \
-k $(KDIR)/vmlinux-$(2).lzma \
-r $(BIN_DIR)/$(IMG_PREFIX)-root.$(1) \
-o $(call imgname,$(1),$(2))-factory.bin
-sh $(TOPDIR)/scripts/combined-image.sh \
"$(KDIR)/vmlinux-$(2).lzma" \
"$(BIN_DIR)/$(IMG_PREFIX)-root.$(1)" \
$(call imgname,$(1),$(2))-sysupgrade.bin
endef
define Image/Build/Planex
$(call PatchKernelGzip,$(2),$(3))
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.gz"` -gt 1441792 ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).bin.gz is too big"; \
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 6356992 ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big"; \
else \
mkimage -A mips -O linux -T kernel -a 0x80060000 -C gzip -e \
0x80060000 \
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(KDIR)/vmlinux-$(2).bin.gz $(KDIR)/vmlinux-$(2).uImage; \
( \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=1408k conv=sync; \
dd if=$(KDIR)/root.$(1); \
) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
$(STAGING_DIR_HOST)/bin/mkplanexfw \
-B $(2) \
-v 2.00.00 \
-i $(call imgname,$(1),$(2))-sysupgrade.bin \
-o $(call imgname,$(1),$(2))-factory.bin; \
fi; fi
endef
define Image/Build/TPLINK
$(call PatchKernelGzip,$(2),$(3))
-$(STAGING_DIR_HOST)/bin/mktplinkfw \
-B $(4) -N OpenWrt -V $(REVISION)\
-k $(KDIR)/vmlinux-$(2).bin.gz \
-r $(BIN_DIR)/$(IMG_PREFIX)-root.$(1) \
-o $(call imgname,$(1),$(2))-factory.bin
-$(STAGING_DIR_HOST)/bin/mktplinkfw \
-B $(4) -N OpenWrt -V $(REVISION) -s \
-k $(KDIR)/vmlinux-$(2).bin.gz \
-r $(BIN_DIR)/$(IMG_PREFIX)-root.$(1) \
-o $(call imgname,$(1),$(2))-sysupgrade.bin
endef
define Image/Build/TPLINK/initramfs
$(call PatchKernelGzip,$(2),$(3))
-$(STAGING_DIR_HOST)/bin/mktplinkfw -c \
-B $(4) -N OpenWrt -V $(REVISION) -s \
-k $(KDIR)/vmlinux-$(2).bin.gz \
-o $(call imgname,$(1),$(2))-uImage.bin
endef
define Image/Build/CyberTAN
$(call PatchKernelGzip,$(2),$(3))
$(call MkImageGzip,$(KDIR)/vmlinux-$(2).bin.gz,$(KDIR)/vmlinux-$(2).uImage)
$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp -f $(KDIR)/vmlinux-$(2).uImage \
-x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1)
-$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(4) \
-i $(KDIR)/image.tmp \
-o $(call imgname,$(1),$(2))-sysupgrade.bin
-$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(4) -g \
-i $(KDIR)/image.tmp \
-o $(call imgname,$(1),$(2))-factory.bin
rm $(KDIR)/image.tmp
endef
wndr3700_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,1024k(kernel),6656k(rootfs),64k(art)ro,7680k@0x70000(firmware)
define Image/Build/WNDR3700
$(call PatchKernelLzma,$(2),$(3) $(wndr3700_mtdlayout))
$(call MkImageLzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(KDIR)/vmlinux-$(2).uImage)
mkdir -p $(KDIR)/wndr3700/image
$(STAGING_DIR_HOST)/bin/wndr3700 \
$(KDIR)/vmlinux-$(2).uImage \
$(KDIR)/wndr3700/image/uImage
$(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
$(KDIR)/wndr3700 $(KDIR)/vmlinux-$(2).uImage.squashfs.tmp \
-nopad -noappend -root-owned -be
-rm -rf $(KDIR)/wndr3700
mkimage -A mips -O linux -T filesystem -C none \
-a 0xbf070000 -e 0xbf070000 \
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(KDIR)/vmlinux-$(2).uImage.squashfs.tmp \
$(KDIR)/vmlinux-$(2).uImage.squashfs.tmp2
$(STAGING_DIR_HOST)/bin/wndr3700 \
$(KDIR)/vmlinux-$(2).uImage.squashfs.tmp2 \
$(KDIR)/vmlinux-$(2).uImage.squashfs
-rm -f $(KDIR)/vmlinux-$(2).uImage.squashfs.tmp*
( \
dd if=$(KDIR)/vmlinux-$(2).uImage.squashfs bs=1024k conv=sync; \
dd if=$(KDIR)/root.$(1) bs=64k; \
) > $(call imgname,$(1),$(2))-sysupgrade.bin
$(STAGING_DIR_HOST)/bin/mkdniimg \
-B WNDR3700 -v OpenWrt.$(REVISION) \
-i $(call imgname,$(1),$(2))-sysupgrade.bin \
-o $(call imgname,$(1),$(2))-factory.img
endef
define Image/Build/WNDR3700/initramfs
$(call PatchKernelLzma,$(2),$(3) $(wndr3700_mtdlayout))
$(call MkImageLzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(KDIR)/vmlinux-$(2).uImage)
$(STAGING_DIR_HOST)/bin/wndr3700 \
$(KDIR)/vmlinux-$(2).uImage \
$(call imgname,$(1),$(2))-uImage.bin
endef
define Image/Build/Zcomax
$(call PatchKernelLzma,$(2),$(3))
$(call MkImageLzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(KDIR)/vmlinux-$(2).uImage.bin)
-$(STAGING_DIR_HOST)/bin/mkzcfw \
-B $(2) \
-k $(KDIR)/vmlinux-$(2).uImage.bin \
-r $(BIN_DIR)/$(IMG_PREFIX)-root.$(1) \
-o $(call imgname,$(1),$(2))-factory.img
( \
dd if=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=6208k count=1 conv=sync; \
dd if=$(KDIR)/vmlinux-$(2).uImage.bin bs=1472k count=1; \
) > $(call imgname,$(1),$(2))-sysupgrade.bin
endef
define Image/Build/Template/initramfs/initramfs
$(call Image/Build/$(1)/initramfs,initramfs,$(2),$(3),$(4),$(5),$(6),$(7))
endef
define Image/Build/Template/all/squashfs
$(call Image/Build/$(1),squashfs,$(2),$(3),$(4),$(5),$(6),$(7))
endef
define Image/Build/Template/all/jffs2-64k
$(call Image/Build/$(1),jffs2-64k,$(2),$(3),$(4),$(5),$(6),$(7))
endef
define Image/Build/Template/all/jffs2-128k
$(call Image/Build/$(1),jffs2-128k,$(2),$(3),$(4),$(5),$(6),$(7))
endef
define Image/Build/Template/squashfs-only/squashfs
$(call Image/Build/$(1),squashfs,$(2),$(3),$(4),$(5),$(6),$(7))
endef
define Image/Build/Template/4k/squashfs
$(call Image/Build/$(1),squashfs-4k,$(2),$(3),$(4),$(5),$(6),$(7))
endef
define Image/Build/Template/64k/squashfs
$(call Image/Build/$(1),squashfs,$(2),$(3),$(4),$(5),$(6),$(7))
endef
define Image/Build/Template/64k/jffs2-64k
$(call Image/Build/$(1),jffs2-64k,$(2),$(3),$(4),$(5),$(6),$(7))
endef
define Image/Build/Template/128k/squashfs
$(call Image/Build/$(1),squashfs,$(2),$(3),$(4),$(5),$(6),$(7))
endef
define Image/Build/Template/128k/jffs2-128k
$(call Image/Build/$(1),jffs2-128k,$(2),$(3),$(4),$(5),$(6),$(7))
endef
define Image/Build/Profile/AP81
$(call Image/Build/Template/$(fs_64k)/$(1),AP83,ap81,board=AP81)
endef
define Image/Build/Profile/AP83
$(call Image/Build/Template/$(fs_64k)/$(1),AP83,ap83,board=AP83)
endef
define Image/Build/Profile/PB42
$(call Image/Build/Template/$(fs_64k)/$(1),PB4X,pb42,board=PB42)
endef
define Image/Build/Profile/PB44
$(call Image/Build/Template/$(fs_64k)/$(1),PB4X,pb44,board=PB44)
endef
define Image/Build/Profile/PB92
$(call Image/Build/Template/$(fs_64k)/$(1),PB92,pb92,board=PB92)
endef
define Image/Build/Profile/WP543
$(call Image/Build/Template/$(fs_64k)/$(1),MyLoader,wp543,0x200000,2M)
$(call Image/Build/Template/$(fs_64k)/$(1),MyLoader,wp543,0x400000,4M)
$(call Image/Build/Template/$(fs_64k)/$(1),MyLoader,wp543,0x800000,8M)
$(call Image/Build/Template/$(fs_64k)/$(1),MyLoader,wp543,0x1000000,16M)
endef
define Image/Build/Profile/DIR600A1
$(call Image/Build/Template/$(fs_64k)/$(1),Cameo7240,dir-600-a1,board=DIR-600-A1,"AP91-AR7240-RT-090223-00")
endef
define Image/Build/Profile/EAP7660D
$(call Image/Build/Template/$(fs_128k)/$(1),PB4X,eap7660d,board=EAP7660D)
endef
define Image/Build/Profile/JWAP003
$(call Image/Build/Template/$(fs_64k)/$(1),PB4X,jwap003,board=JWAP003)
endef
define Image/Build/Profile/FR54RTR
$(call Image/Build/Template/$(fs_64k)/$(1),Cameo7240,fr-54rtr,board=DIR-600-A1,"AP91-AR7240-RT-090223-01")
endef
define Image/Build/Profile/DIR615C1
$(call Image/Build/Template/$(fs_squash)/$(1),Cameo,dir-615-c1,board=DIR-615-C1,"AP81-AR9130-RT-070614-02")
endef
define Image/Build/Profile/TEW632BRP
$(call Image/Build/Template/$(fs_squash)/$(1),Cameo,tew-632brp,board=TEW-632BRP,"AP81-AR9130-RT-070614-00")
endef
define Image/Build/Profile/TEW652BRP
$(call Image/Build/Template/$(fs_squash)/$(1),Cameo,tew-652brp,board=TEW-632BRP,"AP81-AR9130-RT-080609-05")
endef
define Image/Build/Profile/A02RBW300N
$(call Image/Build/Template/$(fs_squash)/$(1),Cameo,a02-rb-w300n,board=TEW-632BRP,"AP81-AR9130-RT-070614-03")
endef
define Image/Build/Profile/UBNTRS
$(call Image/Build/Template/$(fs_64k)/$(1),UBNT,ubnt-rs,board=UBNT-RS,RS,RSx,ar7100)
endef
define Image/Build/Profile/UBNTRSPRO
$(call Image/Build/Template/$(fs_64k)/$(1),UBNT,ubnt-rspro,board=UBNT-RSPRO,RSPRO,RSPRO,ar7100pro)
endef
define Image/Build/Profile/UBNTLSSR71
$(call Image/Build/Template/$(fs_64k)/$(1),UBNT,ubnt-ls-sr71,board=UBNT-LS-SR71,LS-SR71,LS-SR71,ar7100)
endef
define Image/Build/Profile/UBNTBULLETM
$(call Image/Build/Template/$(fs_64k)/$(1),UBNTXM,ubnt-bullet-m,board=UBNT-BM,XM,UBNTXM,ar7240)
endef
define Image/Build/Profile/UBNTROCKETM
$(call Image/Build/Template/$(fs_64k)/$(1),UBNTXM,ubnt-rocket-m,board=UBNT-RM,XM,UBNTXM,ar7240)
endef
define Image/Build/Profile/UBNTNANOM
$(call Image/Build/Template/$(fs_64k)/$(1),UBNTXM,ubnt-nano-m,board=UBNT-NM,XM,UBNTXM,ar7240)
endef
define Image/Build/Profile/UBNT
$(call Image/Build/Profile/UBNTRS,$(1))
$(call Image/Build/Profile/UBNTRSPRO,$(1))
$(call Image/Build/Profile/UBNTLSSR71,$(1))
$(call Image/Build/Profile/UBNTBULLETM,$(1))
$(call Image/Build/Profile/UBNTROCKETM,$(1))
$(call Image/Build/Profile/UBNTNANOM,$(1))
endef
define Image/Build/Profile/MZKW04NU
$(call Image/Build/Template/$(fs_64k)/$(1),Planex,mzk-w04nu,board=MZK-W04NU)
endef
define Image/Build/Profile/MZKW300NH
$(call Image/Build/Template/$(fs_64k)/$(1),Planex,mzk-w300nh,board=MZK-W300NH)
endef
define Image/Build/Profile/TLMR3420V1
$(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-mr3420-v1,board=TL-MR3420,TL-MR3420v1)
endef
define Image/Build/Profile/TLWA901NDV1
$(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-wa901nd-v1,board=TL-WA901ND,TL-WA901NDv1)
endef
define Image/Build/Profile/TLWR741NDV1
$(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-wr741nd-v1,board=TL-WR741ND,TL-WR741NDv1)
endef
define Image/Build/Profile/TLWR841NV15
$(call Image/Build/Template/$(fs_squash)/$(1),TPLINK,tl-wr841n-v1.5,board=TL-WR841N-v1.5,TL-WR841Nv1.5)
endef
define Image/Build/Profile/TLWR841NDV3
$(call Image/Build/Template/$(fs_squash)/$(1),TPLINK,tl-wr841nd-v3,board=TL-WR941ND,TL-WR841NDv3)
endef
define Image/Build/Profile/TLWR841NDV5
$(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-wr841nd-v5,board=TL-WR741ND,TL-WR841NDv5)
endef
define Image/Build/Profile/TLWR841NDV7
$(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-wr841nd-v7,board=TL-WR741ND,TL-WR841NDv7)
endef
define Image/Build/Profile/TLWR941NDV2
$(call Image/Build/Template/$(fs_squash)/$(1),TPLINK,tl-wr941nd-v2,board=TL-WR941ND,TL-WR941NDv2)
endef
define Image/Build/Profile/TLWR941NDV3
$(call Image/Build/Template/$(fs_squash)/$(1),TPLINK,tl-wr941nd-v3,board=TL-WR941ND,TL-WR941NDv2)
endef
define Image/Build/Profile/TLWR941NDV4
$(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-wr941nd-v4,board=TL-WR741ND,TL-WR941NDv4)
endef
define Image/Build/Profile/TLWR1043NDV1
$(call Image/Build/Template/$(fs_squash)/$(1),TPLINK,tl-wr1043nd-v1,board=TL-WR1043ND,TL-WR1043NDv1)
endef
define Image/Build/Profile/WNDR3700
$(call Image/Build/Template/$(fs_64k)/$(1),WNDR3700,wndr3700,board=WNDR3700)
endef
define Image/Build/Profile/AP96
$(call Image/Build/Template/$(fs_64k)/$(1),AP83,ap96,board=AP96)
endef
define Image/Build/Profile/WRT400N
$(call Image/Build/Template/$(fs_64k)/$(1),WRT400N,wrt400n,board=WRT400N)
endef
define Image/Build/Profile/DIR825B1
$(call Image/Build/Template/$(fs_64k)/$(1),DIR825B1,dir-825-b1,board=DIR-825-B1)
endef
define Image/Build/Profile/WRT160NL
$(call Image/Build/Template/$(fs_64k)/$(1),CyberTAN,wrt160nl,board=WRT160NL,1.00.01)
endef
define Image/Build/Profile/WZRHPG300NH
$(call Image/Build/Template/$(fs_128k)/$(1),WZRHPG300NH,wzr-hp-g300nh,board=WZR-HP-G300NH)
endef
define Image/Build/Profile/ZCN1523H28
$(call Image/Build/Template/$(fs_64k)/$(1),Zcomax,zcn-1523h-2-8,board=ZCN-1523H-2)
endef
define Image/Build/Profile/ZCN1523H516
$(call Image/Build/Template/$(fs_64k)/$(1),Zcomax,zcn-1523h-5-16,board=ZCN-1523H-5)
endef
define Image/Build/Profile/Default
$(call Image/Build/Profile/AP81,$(1))
$(call Image/Build/Profile/AP83,$(1))
$(call Image/Build/Profile/A02RBW300N,$(1))
$(call Image/Build/Profile/DIR600A1,$(1))
$(call Image/Build/Profile/DIR615C1,$(1))
$(call Image/Build/Profile/DIR825B1,$(1))
$(call Image/Build/Profile/EAP7660D,$(1))
$(call Image/Build/Profile/FR54RTR,$(1))
$(call Image/Build/Profile/JWAP003,$(1))
$(call Image/Build/Profile/MZKW04NU,$(1))
$(call Image/Build/Profile/MZKW300NH,$(1))
$(call Image/Build/Profile/PB42,$(1))
$(call Image/Build/Profile/PB44,$(1))
$(call Image/Build/Profile/PB92,$(1))
$(call Image/Build/Profile/TEW632BRP,$(1))
$(call Image/Build/Profile/TEW652BRP,$(1))
$(call Image/Build/Profile/TLMR3420V1,$(1))
$(call Image/Build/Profile/TLWA901NDV1,$(1))
$(call Image/Build/Profile/TLWR741NDV1,$(1))
$(call Image/Build/Profile/TLWR841NV15,$(1))
$(call Image/Build/Profile/TLWR841NDV3,$(1))
$(call Image/Build/Profile/TLWR841NDV5,$(1))
$(call Image/Build/Profile/TLWR841NDV7,$(1))
$(call Image/Build/Profile/TLWR941NDV2,$(1))
$(call Image/Build/Profile/TLWR941NDV3,$(1))
$(call Image/Build/Profile/TLWR941NDV4,$(1))
$(call Image/Build/Profile/TLWR1043NDV1,$(1))
$(call Image/Build/Profile/UBNT,$(1))
$(call Image/Build/Profile/WP543,$(1))
$(call Image/Build/Profile/WNDR3700,$(1))
$(call Image/Build/Profile/AP96,$(1))
$(call Image/Build/Profile/WRT400N,$(1))
$(call Image/Build/Profile/WRT160NL,$(1))
$(call Image/Build/Profile/WZRHPG300NH,$(1))
$(call Image/Build/Profile/ZCN1523H28,$(1))
$(call Image/Build/Profile/ZCN1523H516,$(1))
endef
define Image/Build/Profile/Minimal
$(call Image/Build/Profile/Default,$(1))
endef
define Image/Build/Profile/Madwifi
$(call Image/Build/Profile/EAP7660D,$(1))
$(call Image/Build/Profile/UBNTRS,$(1))
$(call Image/Build/Profile/UBNTRSPRO,$(1))
$(call Image/Build/Profile/UBNTLSSR71,$(1))
$(call Image/Build/Profile/WP543,$(1))
endef
define Image/Build/squashfs
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
dd if=$(KDIR)/root.squashfs of=$(KDIR)/root.squashfs-4k.tmp0 bs=4k conv=sync
$(call add_jffs2_mark,$(KDIR)/root.squashfs-4k.tmp0)
dd if=$(KDIR)/root.squashfs-4k.tmp0 of=$(BIN_DIR)/$(IMG_PREFIX)-root.squashfs-4k bs=4k conv=sync
$(call add_jffs2_mark,$(BIN_DIR)/$(IMG_PREFIX)-root.squashfs-4k)
rm -f $(KDIR)/root.squashfs-4k.tmp0
endef
define Image/Build/Initramfs
$(call Image/Build/Profile/$(PROFILE),initramfs)
endef
define Image/Build
$(call Image/Build/$(1))
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
$(call Image/Build/Profile/$(PROFILE),$(1))
endef
$(eval $(call BuildImage))