openwrt

mr/openwrt

Go to file

Gabor Juhos 72253b9073 generic: ar8216: start AR8327 switch from the probe routine The AR8327 switch gets its configuration from platform data or from the device-tree. This allows to start it from the probe routine. Doing so makes it usable with ethernet drivers which only connects to the PHY device when the ethernet interface is opened. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36050		2013-03-15 16:06:28 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	kernel: update linux 3.8 to 3.8.3	2013-03-15 14:39:51 +00:00
package	ath9k: add a fix to reduce the number of spurious tx hang detections	2013-03-15 15:22:06 +00:00
scripts	build: BSD compile fixes	2013-03-07 17:32:29 +00:00
target	generic: ar8216: start AR8327 switch from the probe routine	2013-03-15 16:06:28 +00:00
toolchain	toolchain/binutils: fix partial MD5 sum from r35813	2013-02-26 16:52:36 +00:00
tools	firmware-utils/mktplinkfw: Add support for MR3420v2	2013-03-11 15:55:23 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	kernel: remove the BROKEN dependency on the kernel export symbol strip	2013-03-10 14:51:38 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	build: it is no longer necessary to call make target/linux/clean as part of make clean	2012-12-02 15:26:28 +00:00
README	build: BSD compile fixes	2013-03-07 17:32:29 +00:00
rules.mk	fix ARCH_SUFFIX for mips64{,el}r2	2013-02-20 06:49:02 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org