openwrt/target/linux/brcm63xx/patches-3.14/567-board_dsl-2751b_e1.patch
Jonas Gorski 7bc83fdd13 brcm63xx: Add DT support for A4001N
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42245
2014-08-21 11:28:43 +00:00

153 lines
3.2 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -260,6 +260,141 @@ static struct board_info __initdata boar
},
},
};
+
+static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
+ { .offset = 96, .value = 0x2046 },
+ { .offset = 97, .value = 0xfe9d },
+ { .offset = 98, .value = 0x1854 },
+ { .offset = 99, .value = 0xfa59 },
+ { .offset = 112, .value = 0x2046 },
+ { .offset = 113, .value = 0xfe79 },
+ { .offset = 114, .value = 0x17f5 },
+ { .offset = 115, .value = 0xfa47 },
+ { .offset = 161, .value = 0x2222 },
+ { .offset = 162, .value = 0x2222 },
+ { .offset = 169, .value = 0x2222 },
+ { .offset = 170, .value = 0x2222 },
+ { .offset = 171, .value = 0x5555 },
+ { .offset = 172, .value = 0x5555 },
+ { .offset = 173, .value = 0x4444 },
+ { .offset = 174, .value = 0x4444 },
+ { .offset = 175, .value = 0x5555 },
+ { .offset = 176, .value = 0x5555 },
+};
+
+static struct board_info __initdata board_dsl_2751b_d1 = {
+ .name = "AW5200B",
+ .expected_cpu_id = 0x6318,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .use_fallback_sprom = 1,
+
+ .has_enetsw = 1,
+
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 1,
+
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .leds = {
+ {
+ .name = "dsl-275xb:green:power",
+ .gpio = 3,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "dsl-275xb:green:inet",
+ .gpio = 8,
+ .active_low = 1,
+ },
+ {
+ .name = "dsl-275xb:red:inet-fail",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
+ .name = "dsl-275xb:red:post-failed",
+ .gpio = 11,
+ .active_low = 1,
+ },
+ {
+ .name = "dsl-275xb:wps:blue",
+ .gpio = 16,
+ .active_low = 1,
+ },
+ {
+ .name = "dsl-275xb:green:dsl",
+ .gpio = 17,
+ .active_low = 1,
+ },
+ {
+ .name = "dsl-275xb:green:usb",
+ .gpio = 49, /* FIXME: does not work! */
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "wlan",
+ .gpio = 2,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_WLAN,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ {
+ .desc = "wps",
+ .gpio = 33,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ {
+ .desc = "reset",
+ .gpio = 34,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+
+ .fallback_sprom = {
+ .type = SPROM_BCM43217,
+ .pci_bus = 1,
+ .pci_dev = 0,
+ .board_fixups = dsl2751b_e1_fixups,
+ .num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups),
+ },
+};
#endif /* CONFIG_BCM63XX_CPU_6318 */
/*
@@ -5041,6 +5176,7 @@ static const struct board_info __initcon
#ifdef CONFIG_BCM63XX_CPU_6318
&board_96318ref,
&board_96318ref_p300,
+ &board_dsl_2751b_d1,
#endif
#ifdef CONFIG_BCM63XX_CPU_6328
&board_96328avng,