3c1f6e358d
Patches are generated using the "format-patch" command from the following location: *https://www.codeaurora.org/cgit/quic/kernel/galak-msm/log/?h=apq_ipq_base *rev=0771849495b4128cac2faf7d49c85c729fc48b20 Patches numbered 76/77/102/103 have already been integrated in 3.14.12, so they're not in this list. All these patches are either integrated are pending integration into kernel.org, therefore these patches should go away once the kernel gets upgraded to 3.16. Support is currently limited to AP148 board but can be extended to other platforms in the future. These changes do not cover ethernet connectivity. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 42334
276 lines
8.2 KiB
Diff
276 lines
8.2 KiB
Diff
From 5a8f026acb4a7a6c6d0c868cc1790363640b9b8f Mon Sep 17 00:00:00 2001
|
|
From: Georgi Djakov <gdjakov@mm-sol.com>
|
|
Date: Mon, 10 Mar 2014 17:37:12 +0200
|
|
Subject: [PATCH 047/182] mmc: sdhci-msm: Initial support for Qualcomm
|
|
chipsets
|
|
|
|
This platform driver adds the initial support of Secure Digital Host
|
|
Controller Interface compliant controller found in Qualcomm chipsets.
|
|
|
|
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
|
|
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
|
|
Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com>
|
|
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
|
|
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Signed-off-by: Chris Ball <chris@printf.net>
|
|
---
|
|
drivers/mmc/host/Kconfig | 13 +++
|
|
drivers/mmc/host/Makefile | 1 +
|
|
drivers/mmc/host/sdhci-msm.c | 208 ++++++++++++++++++++++++++++++++++++++++++
|
|
3 files changed, 222 insertions(+)
|
|
create mode 100644 drivers/mmc/host/sdhci-msm.c
|
|
|
|
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
|
|
index 1384f67..c0ea72a 100644
|
|
--- a/drivers/mmc/host/Kconfig
|
|
+++ b/drivers/mmc/host/Kconfig
|
|
@@ -334,6 +334,19 @@ config MMC_ATMELMCI
|
|
|
|
If unsure, say N.
|
|
|
|
+config MMC_SDHCI_MSM
|
|
+ tristate "Qualcomm SDHCI Controller Support"
|
|
+ depends on ARCH_QCOM
|
|
+ depends on MMC_SDHCI_PLTFM
|
|
+ help
|
|
+ This selects the Secure Digital Host Controller Interface (SDHCI)
|
|
+ support present in Qualcomm SOCs. The controller supports
|
|
+ SD/MMC/SDIO devices.
|
|
+
|
|
+ If you have a controller with this interface, say Y or M here.
|
|
+
|
|
+ If unsure, say N.
|
|
+
|
|
config MMC_MSM
|
|
tristate "Qualcomm SDCC Controller Support"
|
|
depends on MMC && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
|
|
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
|
|
index 3483b6b..bbc8445 100644
|
|
--- a/drivers/mmc/host/Makefile
|
|
+++ b/drivers/mmc/host/Makefile
|
|
@@ -64,6 +64,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o
|
|
obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o
|
|
obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o
|
|
obj-$(CONFIG_MMC_SDHCI_BCM2835) += sdhci-bcm2835.o
|
|
+obj-$(CONFIG_MMC_SDHCI_MSM) += sdhci-msm.o
|
|
|
|
ifeq ($(CONFIG_CB710_DEBUG),y)
|
|
CFLAGS-cb710-mmc += -DDEBUG
|
|
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
|
|
new file mode 100644
|
|
index 0000000..3b0606f
|
|
--- /dev/null
|
|
+++ b/drivers/mmc/host/sdhci-msm.c
|
|
@@ -0,0 +1,208 @@
|
|
+/*
|
|
+ * drivers/mmc/host/sdhci-msm.c - Qualcomm SDHCI Platform driver
|
|
+ *
|
|
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 and
|
|
+ * only version 2 as published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/of_device.h>
|
|
+#include <linux/regulator/consumer.h>
|
|
+#include <linux/delay.h>
|
|
+
|
|
+#include "sdhci-pltfm.h"
|
|
+
|
|
+#define CORE_HC_MODE 0x78
|
|
+#define HC_MODE_EN 0x1
|
|
+#define CORE_POWER 0x0
|
|
+#define CORE_SW_RST BIT(7)
|
|
+
|
|
+
|
|
+struct sdhci_msm_host {
|
|
+ struct platform_device *pdev;
|
|
+ void __iomem *core_mem; /* MSM SDCC mapped address */
|
|
+ struct clk *clk; /* main SD/MMC bus clock */
|
|
+ struct clk *pclk; /* SDHC peripheral bus clock */
|
|
+ struct clk *bus_clk; /* SDHC bus voter clock */
|
|
+ struct mmc_host *mmc;
|
|
+ struct sdhci_pltfm_data sdhci_msm_pdata;
|
|
+};
|
|
+
|
|
+/* Platform specific tuning */
|
|
+static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
|
|
+{
|
|
+ /*
|
|
+ * Tuning is required for SDR104, HS200 and HS400 cards and if the clock
|
|
+ * frequency greater than 100MHz in those modes. The standard tuning
|
|
+ * procedure should not be executed, but a custom implementation will be
|
|
+ * added here instead.
|
|
+ */
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static const struct of_device_id sdhci_msm_dt_match[] = {
|
|
+ { .compatible = "qcom,sdhci-msm-v4" },
|
|
+ {},
|
|
+};
|
|
+
|
|
+MODULE_DEVICE_TABLE(of, sdhci_msm_dt_match);
|
|
+
|
|
+static struct sdhci_ops sdhci_msm_ops = {
|
|
+ .platform_execute_tuning = sdhci_msm_execute_tuning,
|
|
+};
|
|
+
|
|
+static int sdhci_msm_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct sdhci_host *host;
|
|
+ struct sdhci_pltfm_host *pltfm_host;
|
|
+ struct sdhci_msm_host *msm_host;
|
|
+ struct resource *core_memres;
|
|
+ int ret;
|
|
+ u16 host_version;
|
|
+
|
|
+ msm_host = devm_kzalloc(&pdev->dev, sizeof(*msm_host), GFP_KERNEL);
|
|
+ if (!msm_host)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ msm_host->sdhci_msm_pdata.ops = &sdhci_msm_ops;
|
|
+ host = sdhci_pltfm_init(pdev, &msm_host->sdhci_msm_pdata, 0);
|
|
+ if (IS_ERR(host))
|
|
+ return PTR_ERR(host);
|
|
+
|
|
+ pltfm_host = sdhci_priv(host);
|
|
+ pltfm_host->priv = msm_host;
|
|
+ msm_host->mmc = host->mmc;
|
|
+ msm_host->pdev = pdev;
|
|
+
|
|
+ ret = mmc_of_parse(host->mmc);
|
|
+ if (ret)
|
|
+ goto pltfm_free;
|
|
+
|
|
+ sdhci_get_of_property(pdev);
|
|
+
|
|
+ /* Setup SDCC bus voter clock. */
|
|
+ msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus");
|
|
+ if (!IS_ERR(msm_host->bus_clk)) {
|
|
+ /* Vote for max. clk rate for max. performance */
|
|
+ ret = clk_set_rate(msm_host->bus_clk, INT_MAX);
|
|
+ if (ret)
|
|
+ goto pltfm_free;
|
|
+ ret = clk_prepare_enable(msm_host->bus_clk);
|
|
+ if (ret)
|
|
+ goto pltfm_free;
|
|
+ }
|
|
+
|
|
+ /* Setup main peripheral bus clock */
|
|
+ msm_host->pclk = devm_clk_get(&pdev->dev, "iface");
|
|
+ if (IS_ERR(msm_host->pclk)) {
|
|
+ ret = PTR_ERR(msm_host->pclk);
|
|
+ dev_err(&pdev->dev, "Perpheral clk setup failed (%d)\n", ret);
|
|
+ goto bus_clk_disable;
|
|
+ }
|
|
+
|
|
+ ret = clk_prepare_enable(msm_host->pclk);
|
|
+ if (ret)
|
|
+ goto bus_clk_disable;
|
|
+
|
|
+ /* Setup SDC MMC clock */
|
|
+ msm_host->clk = devm_clk_get(&pdev->dev, "core");
|
|
+ if (IS_ERR(msm_host->clk)) {
|
|
+ ret = PTR_ERR(msm_host->clk);
|
|
+ dev_err(&pdev->dev, "SDC MMC clk setup failed (%d)\n", ret);
|
|
+ goto pclk_disable;
|
|
+ }
|
|
+
|
|
+ ret = clk_prepare_enable(msm_host->clk);
|
|
+ if (ret)
|
|
+ goto pclk_disable;
|
|
+
|
|
+ core_memres = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
+ msm_host->core_mem = devm_ioremap_resource(&pdev->dev, core_memres);
|
|
+
|
|
+ if (IS_ERR(msm_host->core_mem)) {
|
|
+ dev_err(&pdev->dev, "Failed to remap registers\n");
|
|
+ ret = PTR_ERR(msm_host->core_mem);
|
|
+ goto clk_disable;
|
|
+ }
|
|
+
|
|
+ /* Reset the core and Enable SDHC mode */
|
|
+ writel_relaxed(readl_relaxed(msm_host->core_mem + CORE_POWER) |
|
|
+ CORE_SW_RST, msm_host->core_mem + CORE_POWER);
|
|
+
|
|
+ /* SW reset can take upto 10HCLK + 15MCLK cycles. (min 40us) */
|
|
+ usleep_range(1000, 5000);
|
|
+ if (readl(msm_host->core_mem + CORE_POWER) & CORE_SW_RST) {
|
|
+ dev_err(&pdev->dev, "Stuck in reset\n");
|
|
+ ret = -ETIMEDOUT;
|
|
+ goto clk_disable;
|
|
+ }
|
|
+
|
|
+ /* Set HC_MODE_EN bit in HC_MODE register */
|
|
+ writel_relaxed(HC_MODE_EN, (msm_host->core_mem + CORE_HC_MODE));
|
|
+
|
|
+ host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
|
|
+ host->quirks |= SDHCI_QUIRK_SINGLE_POWER_WRITE;
|
|
+
|
|
+ host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION));
|
|
+ dev_dbg(&pdev->dev, "Host Version: 0x%x Vendor Version 0x%x\n",
|
|
+ host_version, ((host_version & SDHCI_VENDOR_VER_MASK) >>
|
|
+ SDHCI_VENDOR_VER_SHIFT));
|
|
+
|
|
+ ret = sdhci_add_host(host);
|
|
+ if (ret)
|
|
+ goto clk_disable;
|
|
+
|
|
+ return 0;
|
|
+
|
|
+clk_disable:
|
|
+ clk_disable_unprepare(msm_host->clk);
|
|
+pclk_disable:
|
|
+ clk_disable_unprepare(msm_host->pclk);
|
|
+bus_clk_disable:
|
|
+ if (!IS_ERR(msm_host->bus_clk))
|
|
+ clk_disable_unprepare(msm_host->bus_clk);
|
|
+pltfm_free:
|
|
+ sdhci_pltfm_free(pdev);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int sdhci_msm_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct sdhci_host *host = platform_get_drvdata(pdev);
|
|
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
+ struct sdhci_msm_host *msm_host = pltfm_host->priv;
|
|
+ int dead = (readl_relaxed(host->ioaddr + SDHCI_INT_STATUS) ==
|
|
+ 0xffffffff);
|
|
+
|
|
+ sdhci_remove_host(host, dead);
|
|
+ sdhci_pltfm_free(pdev);
|
|
+ clk_disable_unprepare(msm_host->clk);
|
|
+ clk_disable_unprepare(msm_host->pclk);
|
|
+ if (!IS_ERR(msm_host->bus_clk))
|
|
+ clk_disable_unprepare(msm_host->bus_clk);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct platform_driver sdhci_msm_driver = {
|
|
+ .probe = sdhci_msm_probe,
|
|
+ .remove = sdhci_msm_remove,
|
|
+ .driver = {
|
|
+ .name = "sdhci_msm",
|
|
+ .owner = THIS_MODULE,
|
|
+ .of_match_table = sdhci_msm_dt_match,
|
|
+ },
|
|
+};
|
|
+
|
|
+module_platform_driver(sdhci_msm_driver);
|
|
+
|
|
+MODULE_DESCRIPTION("Qualcomm Secure Digital Host Controller Interface driver");
|
|
+MODULE_LICENSE("GPL v2");
|
|
--
|
|
1.7.10.4
|
|
|