openwrt/target/linux/lantiq/dts/ARV7519RW22.dts
Felix Fietkau 022855baf2 lantiq: Move the definition of the xrx200-net node to vr9.dtsi
This removes a lot of duplicate register and interrupt definitions by
moving the xrx200-net definition to vr9.dtsi and making all devices re-
use it.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48547
2016-01-29 00:42:45 +00:00

227 lines
4.1 KiB
Plaintext

/dts-v1/;
/include/ "vr9.dtsi"
/ {
model = "ARV7519RW22 - Orange Livebox 2.1";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
leds {
boot = &power_green;
failsafe = &power_green;
running = &power_green;
internet = &internet_green;
};
};
memory@0 {
reg = <0x0 0x8000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x60000>;
read-only;
};
partition@60000 {
label = "uboot-env";
reg = <0x60000 0x20000>;
read-only;
};
partition@80000 {
label = "firmware";
reg = <0x80000 0x1f00000>;
};
boardconfig: partition@1f80000 {
label = "boardconfig";
reg = <0x1f80000 0x80000>;
read-only;
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
pcie-rst {
lantiq,pins = "io21";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 32 0>;
};
ifxhcd@E106000 {
status = "okay";
gpios = <&gpio 32 0>;
};
pcie@d900000 {
status = "disabled";
};
pci@E105400 {
status = "disabled";
compatible = "lantiq,pci-xway";
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware1 = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/
firmware2 = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 6 1>;
linux,code = <0x198>;
};
rfkill {
label = "rfkill";
gpios = <&gpio 33 1>;
linux,code = <0xf7>;
};
wps {
label = "wps";
gpios = <&gpio 37 1>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
lan_green {
label = "arv7519rw22:green:lan";
gpios = <&gpio 2 1>;
};
internet_red {
label = "arv7519rw22:red:internet";
gpios = <&gpio 10 1>;
};
power_green: power_green {
label = "arv7519rw22:green:power";
gpios = <&gpio 14 1>;
default-state = "keep";
};
alarm_blue {
label = "arv7519rw22:blue:alarm";
gpios = <&gpio 15 1>;
};
internet_orange {
label = "arv7519rw22:orange:internet";
gpios = <&gpio 19 1>;
};
internet_green: internet_green {
label = "arv7519rw22:green:internet";
gpios = <&gpio 28 1>;
};
voice_green {
label = "arv7519rw22:green:voice";
gpios = <&gpio 29 1>;
};
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mtd-mac-address = <&boardconfig 0x16>;
lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
ethernet@1 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "mii";
phy-handle = <&phy13>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <5>;
phy-mode = "mii";
phy-handle = <&phy14>;
};
ethernet@3 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "mii";
phy-handle = <&phy11>;
};
ethernet@4 {
compatible = "lantiq,xrx200-pdi-port";
reg = <3>;
phy-mode = "mii";
phy-handle = <&phy12>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
phy12: ethernet-phy@12 {
reg = <0x12>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
phy14: ethernet-phy@14 {
reg = <0x14>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
};
};