011f2c26f1
As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.4.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
201 lines
4.1 KiB
Diff
201 lines
4.1 KiB
Diff
From 06ccc9945b198d9d1daeda7a7c09825c084ad6f1 Mon Sep 17 00:00:00 2001
|
|
From: James Adams <james@raspberrypi.org>
|
|
Date: Fri, 12 Aug 2016 14:35:00 +0100
|
|
Subject: [PATCH] Add cm3 dts file
|
|
|
|
---
|
|
arch/arm/boot/dts/Makefile | 1 +
|
|
arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 176 ++++++++++++++++++++++++++++++++++
|
|
2 files changed, 177 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/bcm2710-rpi-cm3.dts
|
|
|
|
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_BCM2708) += bcm2708-rp
|
|
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-cm.dtb
|
|
dtb-$(CONFIG_ARCH_BCM2709) += bcm2709-rpi-2-b.dtb
|
|
dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb
|
|
+dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-cm3.dtb
|
|
|
|
# Raspberry Pi
|
|
ifeq ($(CONFIG_ARCH_BCM2708),y)
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
|
|
@@ -0,0 +1,176 @@
|
|
+/dts-v1/;
|
|
+
|
|
+#include "bcm2710.dtsi"
|
|
+
|
|
+/ {
|
|
+ compatible = "brcm,bcm2710","brcm,bcm2709";
|
|
+ model = "Raspberry Pi Compute Module 3";
|
|
+};
|
|
+
|
|
+&gpio {
|
|
+
|
|
+ mmc_pins: mmc_pins {
|
|
+ brcm,pins = <48 49 50 51 52 53>;
|
|
+ brcm,function = <7>; /* alt3 */
|
|
+ brcm,pull = <0 2 2 2 2 2>;
|
|
+ };
|
|
+
|
|
+ spi0_pins: spi0_pins {
|
|
+ brcm,pins = <9 10 11>;
|
|
+ brcm,function = <4>; /* alt0 */
|
|
+ };
|
|
+
|
|
+ spi0_cs_pins: spi0_cs_pins {
|
|
+ brcm,pins = <8 7>;
|
|
+ brcm,function = <1>; /* output */
|
|
+ };
|
|
+
|
|
+ i2c0_pins: i2c0 {
|
|
+ brcm,pins = <0 1>;
|
|
+ brcm,function = <4>;
|
|
+ };
|
|
+
|
|
+ i2c1_pins: i2c1 {
|
|
+ brcm,pins = <2 3>;
|
|
+ brcm,function = <4>;
|
|
+ };
|
|
+
|
|
+ i2s_pins: i2s {
|
|
+ brcm,pins = <18 19 20 21>;
|
|
+ brcm,function = <4>; /* alt0 */
|
|
+ };
|
|
+
|
|
+ uart0_pins: uart0_pins {
|
|
+ brcm,pins;
|
|
+ brcm,function;
|
|
+ brcm,pull = <0 2>;
|
|
+ };
|
|
+
|
|
+ audio_pins: audio_pins {
|
|
+ brcm,pins;
|
|
+ brcm,function;
|
|
+ };
|
|
+};
|
|
+
|
|
+&mmc {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&mmc_pins>;
|
|
+ non-removable;
|
|
+ bus-width = <4>;
|
|
+ status = "okay";
|
|
+ brcm,overclock-50 = <0>;
|
|
+};
|
|
+
|
|
+&soc {
|
|
+ virtgpio: virtgpio {
|
|
+ compatible = "brcm,bcm2835-virtgpio";
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ firmware = <&firmware>;
|
|
+ status = "okay";
|
|
+ };
|
|
+};
|
|
+
|
|
+&fb {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&uart0_pins>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&spi0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
|
|
+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
|
|
+
|
|
+ spidev0: spidev@0{
|
|
+ compatible = "spidev";
|
|
+ reg = <0>; /* CE0 */
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ spi-max-frequency = <500000>;
|
|
+ };
|
|
+
|
|
+ spidev1: spidev@1{
|
|
+ compatible = "spidev";
|
|
+ reg = <1>; /* CE1 */
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ spi-max-frequency = <500000>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&i2c0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&i2c0_pins>;
|
|
+ clock-frequency = <100000>;
|
|
+};
|
|
+
|
|
+&i2c1 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&i2c1_pins>;
|
|
+ clock-frequency = <100000>;
|
|
+};
|
|
+
|
|
+&i2c2 {
|
|
+ clock-frequency = <100000>;
|
|
+};
|
|
+
|
|
+&i2s {
|
|
+ #sound-dai-cells = <0>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&i2s_pins>;
|
|
+};
|
|
+
|
|
+&random {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&leds {
|
|
+ act_led: act {
|
|
+ label = "led0";
|
|
+ linux,default-trigger = "mmc0";
|
|
+ gpios = <&virtgpio 0 0>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&hdmi {
|
|
+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
|
+};
|
|
+
|
|
+&audio {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&audio_pins>;
|
|
+};
|
|
+
|
|
+/ {
|
|
+ __overrides__ {
|
|
+ uart0 = <&uart0>,"status";
|
|
+ uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
|
|
+ uart1 = <&uart1>,"status";
|
|
+ i2s = <&i2s>,"status";
|
|
+ spi = <&spi0>,"status";
|
|
+ i2c0 = <&i2c0>,"status";
|
|
+ i2c1 = <&i2c1>,"status";
|
|
+ i2c2_iknowwhatimdoing = <&i2c2>,"status";
|
|
+ i2c0_baudrate = <&i2c0>,"clock-frequency:0";
|
|
+ i2c1_baudrate = <&i2c1>,"clock-frequency:0";
|
|
+ i2c2_baudrate = <&i2c2>,"clock-frequency:0";
|
|
+ core_freq = <&clk_core>,"clock-frequency:0";
|
|
+
|
|
+ act_led_gpio = <&act_led>,"gpios:4";
|
|
+ act_led_activelow = <&act_led>,"gpios:8";
|
|
+ act_led_trigger = <&act_led>,"linux,default-trigger";
|
|
+
|
|
+ audio = <&audio>,"status";
|
|
+ watchdog = <&watchdog>,"status";
|
|
+ random = <&random>,"status";
|
|
+ sd_overclock = <&sdhost>,"brcm,overclock-50:0";
|
|
+ sd_force_pio = <&sdhost>,"brcm,force-pio?";
|
|
+ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0";
|
|
+ sd_debug = <&sdhost>,"brcm,debug";
|
|
+ };
|
|
+};
|