Go to file
2009-03-11 10:32:44 +00:00
docs allow mac80211 devices to be configured to do 802.11s, requires iw 2009-02-26 14:53:03 +00:00
include fix KERNEL_PATCHVER for rc kernels 2009-03-09 15:05:57 +00:00
package mac80211: update compat-wireless to 2009-03-09 2009-03-10 08:50:11 +00:00
scripts get rid of an illegal characters warning with packages that contain uppercase characters 2009-03-09 15:06:30 +00:00
target do not duplicate fifo_size, since RX and TX fifo sizes are the same, request_mem_region on the registers 2009-03-11 10:32:44 +00:00
toolchain fix powerpc build (works for 2.4 and 2.6) 2009-03-01 11:04:08 +00:00
tools allow flash start address and firmware offset to be set on the command line (#4666) 2009-03-10 09:18:47 +00:00
.gitignore add feeds.conf to .gitignore 2008-09-23 11:06:06 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in add the possibility to put the rootfs to another location (usefull to specify one dedicated NFS export share regardless where in the compute farm the build is done) 2009-02-20 10:38:08 +00:00
feeds.conf.default Add desktop and xfce feed to feeds.conf.default 2009-01-19 19:46:03 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile avoid implicit rules in even more places 2009-03-03 14:16:48 +00:00
README change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh 2008-12-31 14:52:23 +00:00
rules.mk prepend $(STAGING_DIR)/host to the PATH only in target-package stampfile targets, should fix usage of cross tools with host builds 2009-03-09 01:15:59 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org