openwrt/target/linux/brcm63xx/patches-3.14/531-board_AR-5387un.patch
Jonas Gorski 862f7fccb0 brcm63xx: use dtb board detection for NB6
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42127
2014-08-11 11:37:17 +00:00

127 lines
2.8 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -170,6 +170,115 @@ static struct board_info __initdata boar
},
};
+static struct sprom_fixup __initdata ar5387un_fixups[] = {
+ { .offset = 2, .value = 0x05bb },
+ { .offset = 65, .value = 0x1204 },
+ { .offset = 78, .value = 0x0303 },
+ { .offset = 79, .value = 0x0202 },
+ { .offset = 80, .value = 0xff02 },
+ { .offset = 87, .value = 0x0315 },
+ { .offset = 88, .value = 0x0315 },
+ { .offset = 96, .value = 0x2048 },
+ { .offset = 97, .value = 0xff11 },
+ { .offset = 98, .value = 0x1567 },
+ { .offset = 99, .value = 0xfb24 },
+ { .offset = 100, .value = 0x3e3c },
+ { .offset = 101, .value = 0x4038 },
+ { .offset = 102, .value = 0xfe7f },
+ { .offset = 103, .value = 0x1279 },
+ { .offset = 112, .value = 0x2048 },
+ { .offset = 113, .value = 0xff03 },
+ { .offset = 114, .value = 0x154c },
+ { .offset = 115, .value = 0xfb27 },
+ { .offset = 116, .value = 0x3e3c },
+ { .offset = 117, .value = 0x4038 },
+ { .offset = 118, .value = 0xfe87 },
+ { .offset = 119, .value = 0x1233 },
+ { .offset = 203, .value = 0x2226 },
+};
+
+static struct board_info __initdata board_AR5387un = {
+ .name = "96328A-1441N1",
+ .expected_cpu_id = 0x6328,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .use_fallback_sprom = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 1,
+ .has_enetsw = 1,
+
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .leds = {
+ {
+ .name = "AR-5387un:green:power",
+ .gpio = 8,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "AR-5387un:red:power",
+ .gpio = 4,
+ },
+ {
+ .name = "AR-5387un:green:inet",
+ .gpio = 7,
+ },
+ {
+ .name = "AR-5387un:red:inet",
+ .gpio = 1,
+ },
+ {
+ .name = "AR-5387un:green:dsl",
+ .gpio = 11,
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 23,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+
+ .fallback_sprom = {
+ .type = SPROM_BCM43225,
+ .pci_bus = 1,
+ .pci_dev = 0,
+ .board_fixups = ar5387un_fixups,
+ .num_board_fixups = ARRAY_SIZE(ar5387un_fixups),
+ },
+};
+
static struct board_info __initdata board_963281TAN = {
.name = "963281TAN",
.expected_cpu_id = 0x6328,
@@ -3151,6 +3260,7 @@ static const struct board_info __initcon
#endif
#ifdef CONFIG_BCM63XX_CPU_6328
&board_96328avng,
+ &board_AR5387un,
&board_963281TAN,
&board_A4001N1,
&board_dsl_274xb_f1,