mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
865933a0ec
openwrt/target/linux/brcm63xx/patches-3.3/013-spi-bcm63xx-convert-to-the-pump-message-infrastructu.patch
Florian Fainelli 4cdc4b1f36 refresh patches 
SVN-Revision: 32581
2012-07-03 09:45:46 +00:00

290 lines
8.4 KiB
Diff
Raw Blame History

From cde4384e1037c15e5dd04c68d19c75798b6281dd Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Fri, 20 Apr 2012 15:37:33 +0200
Subject: [PATCH] spi/bcm63xx: convert to the pump message infrastructure
This patch converts the bcm63xx SPI driver to use the SPI infrastructure
pump message queue. Since we were previously sleeping in the SPI
driver's transfer() function (which is not allowed) this is now fixed as well.
To complete that conversion a certain number of changes have been made:
- the transfer len is split into multiple hardware transfers in case its
size is bigger than the hardware FIFO size
- the FIFO refill is no longer done in the interrupt context, which was a
bad idea leading to quick interrupt handler re-entrancy
Tested-by: Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
drivers/spi/spi-bcm63xx.c | 149 +++++++++++++++++++++++++++------------------
1 file changed, 89 insertions(+), 60 deletions(-)
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -1,7 +1,7 @@
/*
* Broadcom BCM63xx SPI controller support
*
- * Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2009-2012 Florian Fainelli <florian@openwrt.org>
* Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
*
* This program is free software; you can redistribute it and/or
@@ -30,6 +30,8 @@
#include <linux/spi/spi.h>
#include <linux/completion.h>
#include <linux/err.h>
+#include <linux/workqueue.h>
+#include <linux/pm_runtime.h>
#include <bcm63xx_dev_spi.h>
@@ -96,17 +98,12 @@ static const unsigned bcm63xx_spi_freq_t
{ 391000, SPI_CLK_0_391MHZ }
};
-static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
- struct spi_transfer *t)
+static int bcm63xx_spi_check_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
{
- struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
u8 bits_per_word;
- u8 clk_cfg, reg;
- u32 hz;
- int i;
bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
- hz = (t) ? t->speed_hz : spi->max_speed_hz;
if (bits_per_word != 8) {
dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
__func__, bits_per_word);
@@ -119,6 +116,19 @@ static int bcm63xx_spi_setup_transfer(st
return -EINVAL;
}
+ return 0;
+}
+
+static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
+ u32 hz;
+ u8 clk_cfg, reg;
+ int i;
+
+ hz = (t) ? t->speed_hz : spi->max_speed_hz;
+
/* Find the closest clock configuration */
for (i = 0; i < SPI_CLK_MASK; i++) {
if (hz >= bcm63xx_spi_freq_table[i][0]) {
@@ -139,8 +149,6 @@ static int bcm63xx_spi_setup_transfer(st
bcm_spi_writeb(bs, reg, SPI_CLK_CFG);
dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n",
clk_cfg, hz);
-
- return 0;
}
/* the spi->mode bits understood by this driver: */
@@ -165,7 +173,7 @@ static int bcm63xx_spi_setup(struct spi_
return -EINVAL;
}
- ret = bcm63xx_spi_setup_transfer(spi, NULL);
+ ret = bcm63xx_spi_check_transfer(spi, NULL);
if (ret < 0) {
dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
spi->mode & ~MODEBITS);
@@ -190,28 +198,29 @@ static void bcm63xx_spi_fill_tx_fifo(str
bs->remaining_bytes -= size;
}
-static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
+static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi,
+ struct spi_transfer *t)
{
struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
u16 msg_ctl;
u16 cmd;
+ /* Disable the CMD_DONE interrupt */
+ bcm_spi_writeb(bs, 0, SPI_INT_MASK);
+
dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
t->tx_buf, t->rx_buf, t->len);
/* Transmitter is inhibited */
bs->tx_ptr = t->tx_buf;
bs->rx_ptr = t->rx_buf;
- init_completion(&bs->done);
if (t->tx_buf) {
bs->remaining_bytes = t->len;
bcm63xx_spi_fill_tx_fifo(bs);
}
- /* Enable the command done interrupt which
- * we use to determine completion of a command */
- bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
+ init_completion(&bs->done);
/* Fill in the Message control register */
msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
@@ -230,33 +239,76 @@ static int bcm63xx_txrx_bufs(struct spi_
cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
bcm_spi_writew(bs, cmd, SPI_CMD);
- wait_for_completion(&bs->done);
- /* Disable the CMD_DONE interrupt */
- bcm_spi_writeb(bs, 0, SPI_INT_MASK);
+ /* Enable the CMD_DONE interrupt */
+ bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
return t->len - bs->remaining_bytes;
}
-static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m)
+static int bcm63xx_spi_prepare_transfer(struct spi_master *master)
{
- struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
- struct spi_transfer *t;
- int ret = 0;
+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
- if (unlikely(list_empty(&m->transfers)))
- return -EINVAL;
+ pm_runtime_get_sync(&bs->pdev->dev);
- if (bs->stopping)
- return -ESHUTDOWN;
+ return 0;
+}
+
+static int bcm63xx_spi_unprepare_transfer(struct spi_master *master)
+{
+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+
+ pm_runtime_put(&bs->pdev->dev);
+
+ return 0;
+}
+
+static int bcm63xx_spi_transfer_one(struct spi_master *master,
+ struct spi_message *m)
+{
+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+ struct spi_transfer *t;
+ struct spi_device *spi = m->spi;
+ int status = 0;
+ unsigned int timeout = 0;
list_for_each_entry(t, &m->transfers, transfer_list) {
- ret += bcm63xx_txrx_bufs(spi, t);
- }
+ unsigned int len = t->len;
+ u8 rx_tail;
- m->complete(m->context);
+ status = bcm63xx_spi_check_transfer(spi, t);
+ if (status < 0)
+ goto exit;
+
+ /* configure adapter for a new transfer */
+ bcm63xx_spi_setup_transfer(spi, t);
+
+ while (len) {
+ /* send the data */
+ len -= bcm63xx_txrx_bufs(spi, t);
+
+ timeout = wait_for_completion_timeout(&bs->done, HZ);
+ if (!timeout) {
+ status = -ETIMEDOUT;
+ goto exit;
+ }
+
+ /* read out all data */
+ rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
+
+ /* Read out all the data */
+ if (rx_tail)
+ memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
+ }
+
+ m->actual_length += t->len;
+ }
+exit:
+ m->status = status;
+ spi_finalize_current_message(master);
- return ret;
+ return 0;
}
/* This driver supports single master mode only. Hence
@@ -267,39 +319,15 @@ static irqreturn_t bcm63xx_spi_interrupt
struct spi_master *master = (struct spi_master *)dev_id;
struct bcm63xx_spi *bs = spi_master_get_devdata(master);
u8 intr;
- u16 cmd;
/* Read interupts and clear them immediately */
intr = bcm_spi_readb(bs, SPI_INT_STATUS);
bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
bcm_spi_writeb(bs, 0, SPI_INT_MASK);
- /* A tansfer completed */
- if (intr & SPI_INTR_CMD_DONE) {
- u8 rx_tail;
-
- rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
-
- /* Read out all the data */
- if (rx_tail)
- memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
-
- /* See if there is more data to send */
- if (bs->remaining_bytes > 0) {
- bcm63xx_spi_fill_tx_fifo(bs);
-
- /* Start the transfer */
- bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT,
- SPI_MSG_CTL);
- cmd = bcm_spi_readw(bs, SPI_CMD);
- cmd |= SPI_CMD_START_IMMEDIATE;
- cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
- bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
- bcm_spi_writew(bs, cmd, SPI_CMD);
- } else {
- complete(&bs->done);
- }
- }
+ /* A transfer completed */
+ if (intr & SPI_INTR_CMD_DONE)
+ complete(&bs->done);
return IRQ_HANDLED;
}
@@ -345,7 +373,6 @@ static int __devinit bcm63xx_spi_probe(s
}
bs = spi_master_get_devdata(master);
- init_completion(&bs->done);
platform_set_drvdata(pdev, master);
bs->pdev = pdev;
@@ -379,7 +406,9 @@ static int __devinit bcm63xx_spi_probe(s
master->bus_num = pdata->bus_num;
master->num_chipselect = pdata->num_chipselect;
master->setup = bcm63xx_spi_setup;
- master->transfer = bcm63xx_transfer;
+ master->prepare_transfer_hardware = bcm63xx_spi_prepare_transfer;
+ master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer;
+ master->transfer_one_message = bcm63xx_spi_transfer_one;
bs->speed_hz = pdata->speed_hz;
bs->stopping = 0;
bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
Reference in New Issue View Git Blame Copy Permalink