mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
87c22c5f13
openwrt/target/linux/brcm47xx-2.6/patches/100-board_support.patch

6951 lines
203 KiB
Diff
Raw Blame History

diff -urN linux.old/arch/mips/bcm947xx/cfe_env.c linux.dev/arch/mips/bcm947xx/cfe_env.c
--- linux.old/arch/mips/bcm947xx/cfe_env.c 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/cfe_env.c 2007-01-25 23:34:01.000000000 +0100
@@ -0,0 +1,232 @@
+/*
+ * CFE environment varialble access
+ *
+ * Copyright 2006, Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Copyright 2001-2003, Broadcom Corporation
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#define NVRAM_SIZE (0x1ff0)
+static char _nvdata[NVRAM_SIZE] __initdata;
+static char _valuestr[256] __initdata;
+
+/*
+ * TLV types. These codes are used in the "type-length-value"
+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
+ *
+ * The layout of the flash/nvram is as follows:
+ *
+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
+ *
+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
+ * The "length" field marks the length of the data section, not
+ * including the type and length fields.
+ *
+ * Environment variables are stored as follows:
+ *
+ * <type_env> <length> <flags> <name> = <value>
+ *
+ * If bit 0 (low bit) is set, the length is an 8-bit value.
+ * If bit 0 (low bit) is clear, the length is a 16-bit value
+ *
+ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still
+ * indicates the size of the length field.
+ *
+ * Flags are from the constants below:
+ *
+ */
+#define ENV_LENGTH_16BITS 0x00 /* for low bit */
+#define ENV_LENGTH_8BITS 0x01
+
+#define ENV_TYPE_USER 0x80
+
+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
+
+/*
+ * The actual TLV types we support
+ */
+
+#define ENV_TLV_TYPE_END 0x00
+#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
+
+/*
+ * Environment variable flags
+ */
+
+#define ENV_FLG_NORMAL 0x00 /* normal read/write */
+#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */
+#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */
+
+#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */
+#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */
+
+
+/* *********************************************************************
+ * _nvram_read(buffer,offset,length)
+ *
+ * Read data from the NVRAM device
+ *
+ * Input parameters:
+ * buffer - destination buffer
+ * offset - offset of data to read
+ * length - number of bytes to read
+ *
+ * Return value:
+ * number of bytes read, or <0 if error occured
+ ********************************************************************* */
+static int
+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
+{
+ int i;
+ if (offset > NVRAM_SIZE)
+ return -1;
+
+ for ( i = 0; i < length; i++) {
+ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
+ }
+ return length;
+}
+
+
+static char*
+_strnchr(const char *dest,int c,size_t cnt)
+{
+ while (*dest && (cnt > 0)) {
+ if (*dest == c) return (char *) dest;
+ dest++;
+ cnt--;
+ }
+ return NULL;
+}
+
+
+
+/*
+ * Core support API: Externally visible.
+ */
+
+/*
+ * Get the value of an NVRAM variable
+ * @param name name of variable to get
+ * @return value of variable or NULL if undefined
+ */
+
+char*
+cfe_env_get(unsigned char *nv_buf, char* name)
+{
+ int size;
+ unsigned char *buffer;
+ unsigned char *ptr;
+ unsigned char *envval;
+ unsigned int reclen;
+ unsigned int rectype;
+ int offset;
+ int flg;
+
+ size = NVRAM_SIZE;
+ buffer = &_nvdata[0];
+
+ ptr = buffer;
+ offset = 0;
+
+ /* Read the record type and length */
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
+ goto error;
+ }
+
+ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) {
+
+ /* Adjust pointer for TLV type */
+ rectype = *(ptr);
+ offset++;
+ size--;
+
+ /*
+ * Read the length. It can be either 1 or 2 bytes
+ * depending on the code
+ */
+ if (rectype & ENV_LENGTH_8BITS) {
+ /* Read the record type and length - 8 bits */
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
+ goto error;
+ }
+ reclen = *(ptr);
+ size--;
+ offset++;
+ }
+ else {
+ /* Read the record type and length - 16 bits, MSB first */
+ if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
+ goto error;
+ }
+ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
+ size -= 2;
+ offset += 2;
+ }
+
+ if (reclen > size)
+ break; /* should not happen, bad NVRAM */
+
+ switch (rectype) {
+ case ENV_TLV_TYPE_ENV:
+ /* Read the TLV data */
+ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
+ goto error;
+ flg = *ptr++;
+ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
+ if (envval) {
+ *envval++ = '\0';
+ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
+ _valuestr[(reclen-1)-(envval-ptr)] = '\0';
+#if 0
+ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
+#endif
+ if(!strcmp(ptr, name)){
+ return _valuestr;
+ }
+ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
+ return _valuestr;
+ }
+ break;
+
+ default:
+ /* Unknown TLV type, skip it. */
+ break;
+ }
+
+ /*
+ * Advance to next TLV
+ */
+
+ size -= (int)reclen;
+ offset += reclen;
+
+ /* Read the next record type */
+ ptr = buffer;
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1)
+ goto error;
+ }
+
+error:
+ return NULL;
+
+}
+
diff -urN linux.old/arch/mips/bcm947xx/include/nvram.h linux.dev/arch/mips/bcm947xx/include/nvram.h
--- linux.old/arch/mips/bcm947xx/include/nvram.h 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/include/nvram.h 2007-01-25 23:34:01.000000000 +0100
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __NVRAM_H
+#define __NVRAM_H
+
+struct nvram_header {
+ u32 magic;
+ u32 len;
+ u32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:31 sdram_init */
+ u32 config_refresh; /* 0:15 sdram_config, 16:31 sdram_refresh */
+ u32 config_ncdl; /* ncdl values for memc */
+};
+
+struct nvram_tuple {
+ char *name;
+ char *value;
+ struct nvram_tuple *next;
+};
+
+#define NVRAM_HEADER 0x48534C46 /* 'FLSH' */
+#define NVRAM_VERSION 1
+#define NVRAM_HEADER_SIZE 20
+#define NVRAM_SPACE 0x8000
+
+#define NVRAM_MAX_VALUE_LEN 255
+#define NVRAM_MAX_PARAM_LEN 64
+
+char *nvram_get(const char *name);
+
+#endif
diff -urN linux.old/arch/mips/bcm947xx/irq.c linux.dev/arch/mips/bcm947xx/irq.c
--- linux.old/arch/mips/bcm947xx/irq.c 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/irq.c 2007-01-25 23:34:01.000000000 +0100
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/types.h>
+
+#include <asm/cpu.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/irq_cpu.h>
+
+void plat_irq_dispatch(void)
+{
+ u32 cause;
+
+ cause = read_c0_cause() & read_c0_status() & CAUSEF_IP;
+
+ clear_c0_status(cause);
+
+ if (cause & CAUSEF_IP7)
+ do_IRQ(7);
+ if (cause & CAUSEF_IP2)
+ do_IRQ(2);
+ if (cause & CAUSEF_IP3)
+ do_IRQ(3);
+ if (cause & CAUSEF_IP4)
+ do_IRQ(4);
+ if (cause & CAUSEF_IP5)
+ do_IRQ(5);
+ if (cause & CAUSEF_IP6)
+ do_IRQ(6);
+}
+
+void __init arch_init_irq(void)
+{
+ mips_cpu_irq_init(0);
+}
diff -urN linux.old/arch/mips/bcm947xx/Makefile linux.dev/arch/mips/bcm947xx/Makefile
--- linux.old/arch/mips/bcm947xx/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/Makefile 2007-01-26 01:38:18.000000000 +0100
@@ -0,0 +1,7 @@
+#
+# Makefile for the BCM47xx specific kernel interface routines
+# under Linux.
+#
+
+obj-y := irq.o prom.o setup.o time.o
+obj-y += nvram.o cfe_env.o
diff -urN linux.old/arch/mips/bcm947xx/nvram.c linux.dev/arch/mips/bcm947xx/nvram.c
--- linux.old/arch/mips/bcm947xx/nvram.c 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/nvram.c 2007-01-26 01:14:42.000000000 +0100
@@ -0,0 +1,131 @@
+/*
+ * BCM947xx nvram variable access
+ *
+ * Copyright 2006, Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ *
+ * Copyright 2005, Broadcom Corporation
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/ssb/ssb.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <asm/byteorder.h>
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#include <nvram.h>
+
+#define MB * 1048576
+extern struct ssb_bus ssb;
+
+static char nvram_buf[NVRAM_SPACE];
+static int cfe_env;
+extern char *cfe_env_get(char *nv_buf, const char *name);
+
+/* Probe for NVRAM header */
+static void __init early_nvram_init(void)
+{
+ struct ssb_mipscore *mcore = &ssb.mipscore;
+ struct nvram_header *header;
+ int i;
+ u32 base, lim, off;
+ u32 *src, *dst;
+
+ base = mcore->flash_window;
+ lim = mcore->flash_window_size;
+ cfe_env = 0;
+
+
+ /* XXX: hack for supporting the CFE environment stuff on WGT634U */
+ if (lim >= 8 MB) {
+ src = (u32 *) KSEG1ADDR(base + 8 MB - 0x2000);
+ dst = (u32 *) nvram_buf;
+
+ if ((*src & 0xff00ff) == 0x000001) {
+ printk("early_nvram_init: WGT634U NVRAM found.\n");
+
+ for (i = 0; i < 0x1ff0; i++) {
+ if (*src == 0xFFFFFFFF)
+ break;
+ *dst++ = *src++;
+ }
+ cfe_env = 1;
+ return;
+ }
+ }
+
+ off = 0x20000;
+ while (off <= lim) {
+ /* Windowed flash access */
+ header = (struct nvram_header *) KSEG1ADDR(base + off - NVRAM_SPACE);
+ if (header->magic == NVRAM_HEADER)
+ goto found;
+ off <<= 1;
+ }
+
+ /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
+ header = (struct nvram_header *) KSEG1ADDR(base + 4096);
+ if (header->magic == NVRAM_HEADER)
+ goto found;
+
+ header = (struct nvram_header *) KSEG1ADDR(base + 1024);
+ if (header->magic == NVRAM_HEADER)
+ goto found;
+
+ return;
+
+found:
+ src = (u32 *) header;
+ dst = (u32 *) nvram_buf;
+ for (i = 0; i < sizeof(struct nvram_header); i += 4)
+ *dst++ = *src++;
+ for (; i < header->len && i < NVRAM_SPACE; i += 4)
+ *dst++ = le32_to_cpu(*src++);
+}
+
+char *nvram_get(const char *name)
+{
+ char *var, *value, *end, *eq;
+
+ if (!name)
+ return NULL;
+
+ if (!nvram_buf[0])
+ early_nvram_init();
+
+ if (cfe_env)
+ return cfe_env_get(nvram_buf, name);
+
+ /* Look for name=value and return value */
+ var = &nvram_buf[sizeof(struct nvram_header)];
+ end = nvram_buf + sizeof(nvram_buf) - 2;
+ end[0] = end[1] = '\0';
+ for (; *var; var = value + strlen(value) + 1) {
+ if (!(eq = strchr(var, '=')))
+ break;
+ value = eq + 1;
+ if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0)
+ return value;
+ }
+
+ return NULL;
+}
diff -urN linux.old/arch/mips/bcm947xx/prom.c linux.dev/arch/mips/bcm947xx/prom.c
--- linux.old/arch/mips/bcm947xx/prom.c 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/prom.c 2007-01-26 20:20:38.000000000 +0100
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/pmon.h>
+
+const char *get_system_type(void)
+{
+ return "Broadcom BCM47xx";
+}
+
+void __init prom_init(void)
+{
+ unsigned long mem;
+
+ mips_machgroup = MACH_GROUP_BRCM;
+ mips_machtype = MACH_BCM47XX;
+
+ cfe_setup(fw_arg0, fw_arg1, fw_arg2, fw_arg3);
+
+ /* Figure out memory size by finding aliases */
+ for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) {
+ if (*(unsigned long *)((unsigned long)(prom_init) + mem) ==
+ *(unsigned long *)(prom_init))
+ break;
+ }
+
+ add_memory_region(0, mem, BOOT_MEM_RAM);
+}
+
+unsigned long __init prom_free_prom_memory(void)
+{
+ return 0;
+}
diff -urN linux.old/arch/mips/bcm947xx/setup.c linux.dev/arch/mips/bcm947xx/setup.c
--- linux.old/arch/mips/bcm947xx/setup.c 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/setup.c 2007-01-26 20:20:38.000000000 +0100
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
+ * Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006 Michael Buesch
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/reboot.h>
+#include <asm/cfe.h>
+#include <linux/pm.h>
+#include <linux/ssb/ssb.h>
+
+#include <nvram.h>
+
+extern void bcm47xx_pci_init(void);
+extern void bcm47xx_time_init(void);
+
+struct ssb_bus ssb;
+
+static void bcm47xx_machine_restart(char *command)
+{
+ printk(KERN_ALERT "Please stand by while rebooting the system...\n");
+ local_irq_disable();
+ /* CFE has a reboot callback, but that does not work.
+ * Oopses with: Reserved instruction in kernel code.
+ */
+
+ /* Set the watchdog timer to reset immediately */
+//TODO sb_watchdog(sbh, 1);
+ while (1)
+ cpu_relax();
+}
+
+static void bcm47xx_machine_halt(void)
+{
+ /* Disable interrupts and watchdog and spin forever */
+ local_irq_disable();
+//TODO sb_watchdog(sbh, 0);
+ while (1)
+ cpu_relax();
+}
+
+static void e_aton(char *str, char *dest)
+{
+ int i = 0;
+
+ if (str == NULL) {
+ memset(dest, 0, 6);
+ return;
+ }
+
+ for (;;) {
+ dest[i++] = (char) simple_strtoul(str, NULL, 16);
+ str += 2;
+ if (!*str++ || i == 6)
+ break;
+ }
+}
+
+static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
+{
+ // TODO
+}
+
+static void bcm47xx_fill_sprom_nvram(struct ssb_sprom *sprom)
+{
+ char *s;
+
+ memset(sprom, 0, sizeof(struct ssb_sprom));
+
+ sprom->revision = 3;
+ if ((s = nvram_get("et0macaddr")))
+ e_aton(s, sprom->r1.et0mac);
+ if ((s = nvram_get("et1macaddr")))
+ e_aton(s, sprom->r1.et1mac);
+ if ((s = nvram_get("et0phyaddr")))
+ sprom->r1.et0phyaddr = simple_strtoul(s, NULL, 10);
+ if ((s = nvram_get("et1phyaddr")))
+ sprom->r1.et1phyaddr = simple_strtoul(s, NULL, 10);
+}
+
+void __init plat_mem_setup(void)
+{
+ int i, err;
+ char *s;
+ struct ssb_mipscore *mcore;
+
+ err = ssb_bus_ssbbus_register(&ssb, SSB_ENUM_BASE, bcm47xx_fill_sprom);
+ if (err) {
+ const char *msg = "Failed to initialize SSB bus (err %d)\n";
+ cfe_printk(msg, err); /* Make sure the message gets out of the box. */
+ panic(msg, err);
+ }
+ mcore = &ssb.mipscore;
+
+ /* FIXME: the nvram init depends on the ssb being fully initializes,
+ * can't use the fill_sprom callback yet! */
+ bcm47xx_fill_sprom_nvram(&ssb.sprom);
+
+ s = nvram_get("kernel_args");
+ if (s && !strncmp(s, "console=ttyS1", 13)) {
+ struct ssb_serial_port port;
+
+ cfe_printk("Swapping serial ports!\n");
+ /* swap serial ports */
+ memcpy(&port, &mcore->serial_ports[0], sizeof(port));
+ memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], sizeof(port));
+ memcpy(&mcore->serial_ports[1], &port, sizeof(port));
+ }
+
+ for (i = 0; i < mcore->nr_serial_ports; i++) {
+ struct ssb_serial_port *port = &(mcore->serial_ports[i]);
+ struct uart_port s;
+
+ memset(&s, 0, sizeof(s));
+ s.line = i;
+ s.membase = port->regs;
+ s.irq = port->irq + 2;//FIXME?
+ s.uartclk = port->baud_base;
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+ s.iotype = SERIAL_IO_MEM;
+ s.regshift = port->reg_shift;
+
+ early_serial_setup(&s);
+ }
+ cfe_printk("Serial init done.\n");
+
+ _machine_restart = bcm47xx_machine_restart;
+ _machine_halt = bcm47xx_machine_halt;
+ pm_power_off = bcm47xx_machine_halt;
+
+ board_time_init = bcm47xx_time_init;//FIXME move into ssb
+}
+
diff -urN linux.old/arch/mips/bcm947xx/time.c linux.dev/arch/mips/bcm947xx/time.c
--- linux.old/arch/mips/bcm947xx/time.c 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/bcm947xx/time.c 2007-01-26 16:26:48.000000000 +0100
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/serial_reg.h>
+#include <linux/interrupt.h>
+#include <linux/ssb/ssb.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+extern struct ssb_bus ssb;
+
+void __init
+bcm47xx_time_init(void)
+{
+ unsigned long hz;
+
+ /*
+ * Use deterministic values for initial counter interrupt
+ * so that calibrate delay avoids encountering a counter wrap.
+ */
+ write_c0_count(0);
+ write_c0_compare(0xffff);
+
+// hz = ssb_clockspeed(&ssb);
+// if (!hz)
+ hz = 100000000;
+
+ /* Set MIPS counter frequency for fixed_rate_gettimeoffset() */
+ mips_hpt_frequency = hz;
+}
+
+void __init
+plat_timer_setup(struct irqaction *irq)
+{
+ /* Enable the timer interrupt */
+ setup_irq(7, irq);
+}
diff -urN linux.old/arch/mips/cfe/cfe.c linux.dev/arch/mips/cfe/cfe.c
--- linux.old/arch/mips/cfe/cfe.c 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/cfe/cfe.c 2007-01-25 23:34:01.000000000 +0100
@@ -0,0 +1,533 @@
+/*
+ * Broadcom Common Firmware Environment (CFE) support
+ *
+ * Copyright 2000, 2001, 2002
+ * Broadcom Corporation. All rights reserved.
+ *
+ * Copyright (C) 2006 Michael Buesch
+ *
+ * Original Authors: Mitch Lichtenberg, Chris Demetriou
+ *
+ * This software is furnished under license and may be used and copied only
+ * in accordance with the following terms and conditions. Subject to these
+ * conditions, you may download, copy, install, use, modify and distribute
+ * modified or unmodified copies of this software in source and/or binary
+ * form. No title or ownership is transferred hereby.
+ *
+ * 1) Any source code used, modified or distributed must reproduce and
+ * retain this copyright notice and list of conditions as they appear in
+ * the source file.
+ *
+ * 2) No right is granted to use any trade name, trademark, or logo of
+ * Broadcom Corporation. The "Broadcom Corporation" name may not be
+ * used to endorse or promote products derived from this software
+ * without the prior written permission of Broadcom Corporation.
+ *
+ * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
+ * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
+ * FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
+ * LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <asm/cfe.h>
+
+#include "cfe_private.h"
+
+
+static cfe_uint_t cfe_handle;
+static int (*cfe_trampoline)(long handle, long iocb);
+
+
+#include <linux/kernel.h>
+
+void __init cfe_setup(unsigned long fwarg0, unsigned long fwarg1,
+ unsigned long fwarg2, unsigned long fwarg3)
+{
+ if (fwarg3 == 0x80300000) {
+ /* WRT54G workaround */
+ fwarg3 = CFE_EPTSEAL;
+ fwarg2 = 0xBFC00500;
+ }
+ if (fwarg3 != CFE_EPTSEAL) {
+ /* We are not booted from CFE */
+ return;
+ }
+ if (fwarg1 == 0) {
+ /* We are on the boot CPU */
+ cfe_handle = (cfe_uint_t)fwarg0;
+ cfe_trampoline = CFE_TO_PTR(fwarg2);
+ }
+}
+
+int cfe_vprintk(const char *fmt, va_list args)
+{
+ static char buffer[1024];
+ static DEFINE_SPINLOCK(lock);
+ static const char pfx[] = "CFE-console: ";
+ static const size_t pfx_len = sizeof(pfx) - 1;
+ unsigned long flags;
+ int len, cnt, pos;
+ int handle;
+ int res;
+
+ if (!cfe_present())
+ return -ENODEV;
+
+ spin_lock_irqsave(&lock, flags);
+ handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
+ if (CFE_ISERR(handle)) {
+ len = -EIO;
+ goto out;
+ }
+ strcpy(buffer, pfx);
+ len = vscnprintf(buffer + pfx_len,
+ sizeof(buffer) - pfx_len - 2,
+ fmt, args);
+ len += pfx_len;
+ /* The CFE console requires CR-LF line-ends.
+ * Add a CR, if we only terminate lines with a LF.
+ * This does only fix CR-LF at the end of the string.
+ * So for multiple lines, use multiple cfe_vprintk calls.
+ */
+ if (len > 1 &&
+ buffer[len - 1] == '\n' && buffer[len - 2] != '\r') {
+ buffer[len - 1] = '\r';
+ buffer[len] = '\n';
+ len += 1;
+ }
+ cnt = len;
+ pos = 0;
+ while (cnt > 0) {
+ res = cfe_write(handle, buffer + pos, len - pos);
+ if (CFE_ISERR(res)) {
+ len = -EIO;
+ goto out;
+ }
+ cnt -= res;
+ pos += res;
+ }
+out:
+ spin_unlock_irqrestore(&lock, flags);
+
+ return len;
+}
+
+int cfe_printk(const char *fmt, ...)
+{
+ va_list args;
+ int res;
+
+ va_start(args, fmt);
+ res = cfe_vprintk(fmt, args);
+ va_end(args);
+
+ return res;
+}
+
+static int cfe_iocb_dispatch(struct cfe_iocb *iocb)
+{
+ if (!cfe_present())
+ return CFE_ERR_UNSUPPORTED;
+ return cfe_trampoline((long)cfe_handle, (long)iocb);
+}
+
+int cfe_present(void)
+{
+ return (cfe_trampoline != NULL);
+}
+
+int cfe_close(int handle)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_DEV_CLOSE;
+ iocb.handle = handle;
+
+ err = cfe_iocb_dispatch(&iocb);
+
+ return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_cpu_start(int cpu, void (*fn)(void), long sp, long gp, long a1)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_FW_CPUCTL;
+ iocb.psize = sizeof(struct cfe_iocb_cpuctl);
+ iocb.cpuctl.number = cpu;
+ iocb.cpuctl.command = CFE_CPU_CMD_START;
+ iocb.cpuctl.gp = gp;
+ iocb.cpuctl.sp = sp;
+ iocb.cpuctl.a1 = a1;
+ iocb.cpuctl.start_addr = (long)fn;
+
+ err = cfe_iocb_dispatch(&iocb);
+
+ return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_cpu_stop(int cpu)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_FW_CPUCTL;
+ iocb.psize = sizeof(struct cfe_iocb_cpuctl);
+ iocb.cpuctl.number = cpu;
+ iocb.cpuctl.command = CFE_CPU_CMD_STOP;
+
+ err = cfe_iocb_dispatch(&iocb);
+
+ return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_ENV_ENUM;
+ iocb.psize = sizeof(struct cfe_iocb_envbuf);
+ iocb.envbuf.index = idx;
+ iocb.envbuf.name = PTR_TO_CFE(name);
+ iocb.envbuf.name_len = namelen;
+ iocb.envbuf.val = PTR_TO_CFE(val);
+ iocb.envbuf.val_len = vallen;
+
+ err = cfe_iocb_dispatch(&iocb);
+
+ return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_enumdev(int idx, char *name, int namelen)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+
+ iocb.fcode = CFE_CMD_DEV_ENUM;
+ iocb.psize = sizeof(struct cfe_iocb_envbuf);
+ iocb.envbuf.index = idx;
+ iocb.envbuf.name = PTR_TO_CFE(name);
+ iocb.envbuf.name_len = namelen;
+
+ err = cfe_iocb_dispatch(&iocb);
+
+ return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_enummem(int idx, int flags, u64 *start, u64 *length,
+ u64 *type)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+
+ iocb.fcode = CFE_CMD_FW_MEMENUM;
+ iocb.flags = flags;
+ iocb.psize = sizeof(struct cfe_iocb_meminfo);
+ iocb.meminfo.index = idx;
+
+ err = cfe_iocb_dispatch(&iocb);
+ if (CFE_ISERR(err))
+ return err;
+ if (!CFE_ISERR(iocb.status)) {
+ *start = iocb.meminfo.addr;
+ *length = iocb.meminfo.size;
+ *type = iocb.meminfo.type;
+ }
+
+ return iocb.status;
+}
+
+int cfe_exit(int warm, int status)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+printk("CFE REBOOT\n");
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_FW_RESTART;
+ if (warm)
+ iocb.flags = CFE_FLG_WARMSTART;
+ iocb.psize = sizeof(struct cfe_iocb_exitstat);
+ iocb.exitstat.status = status;
+
+printk("CALL\n");
+ err = cfe_iocb_dispatch(&iocb);
+printk("DONE\n");
+
+ return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_flushcache(int flags)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_FW_FLUSHCACHE;
+ iocb.flags = flags;
+
+ err = cfe_iocb_dispatch(&iocb);
+
+ return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_getdevinfo(char *name)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_DEV_GETINFO;
+ iocb.psize = sizeof(struct cfe_iocb_buf);
+ iocb.buffer.ptr = PTR_TO_CFE(name);
+ iocb.buffer.length = strlen(name);
+
+ err = cfe_iocb_dispatch(&iocb);
+ if (CFE_ISERR(err))
+ return err;
+ if (CFE_ISERR(iocb.status))
+ return iocb.status;
+
+ return iocb.buffer.devflags;
+}
+
+int cfe_getenv(char *name, char *dest, int destlen)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ dest[0] = '\0';
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_ENV_GET;
+ iocb.psize = sizeof(struct cfe_iocb_envbuf);
+ iocb.envbuf.name = PTR_TO_CFE(name);
+ iocb.envbuf.name_len = strlen(name);
+ iocb.envbuf.val = PTR_TO_CFE(dest);
+ iocb.envbuf.val_len = destlen;
+
+ err = cfe_iocb_dispatch(&iocb);
+
+ return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_getfwinfo(struct cfe_fwinfo *info)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_FW_GETINFO;
+ iocb.psize = sizeof(struct cfe_iocb_fwinfo);
+
+ err = cfe_iocb_dispatch(&iocb);
+ if (CFE_ISERR(err))
+ return err;
+ if (CFE_ISERR(iocb.status))
+ return err;
+
+ info->version = iocb.fwinfo.version;
+ info->totalmem = iocb.fwinfo.totalmem;
+ info->flags = iocb.fwinfo.flags;
+ info->boardid = iocb.fwinfo.boardid;
+ info->bootarea_va = iocb.fwinfo.bootarea_va;
+ info->bootarea_pa = iocb.fwinfo.bootarea_pa;
+ info->bootarea_size = iocb.fwinfo.bootarea_size;
+
+ return iocb.status;
+}
+
+int cfe_getstdhandle(int handletype)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_DEV_GETHANDLE;
+ iocb.flags = handletype;
+
+ err = cfe_iocb_dispatch(&iocb);
+ if (CFE_ISERR(err))
+ return err;
+ if (CFE_ISERR(iocb.status))
+ return iocb.status;
+
+ return iocb.handle;
+}
+
+int cfe_getticks(s64 *ticks)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_FW_GETTIME;
+ iocb.psize = sizeof(struct cfe_iocb_time);
+
+ err = cfe_iocb_dispatch(&iocb);
+ if (CFE_ISERR(err))
+ return err;
+ if (!CFE_ISERR(iocb.status))
+ *ticks = iocb.time.ticks;
+
+ return iocb.status;
+}
+
+int cfe_inpstat(int handle)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_DEV_INPSTAT;
+ iocb.handle = handle;
+ iocb.psize = sizeof(struct cfe_iocb_inpstat);
+
+ err = cfe_iocb_dispatch(&iocb);
+ if (CFE_ISERR(err))
+ return err;
+ if (CFE_ISERR(iocb.status))
+ return iocb.status;
+
+ return iocb.inpstat.status;
+}
+
+int cfe_ioctl(int handle, unsigned int ioctlnum,
+ unsigned char *buffer, int length,
+ int *retlen, u64 offset)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_DEV_IOCTL;
+ iocb.handle = handle;
+ iocb.psize = sizeof(struct cfe_iocb_buf);
+ iocb.buffer.offset = offset;
+ iocb.buffer.ioctlcmd = ioctlnum;
+ iocb.buffer.ptr = PTR_TO_CFE(buffer);
+ iocb.buffer.length = length;
+
+ err = cfe_iocb_dispatch(&iocb);
+ if (CFE_ISERR(err))
+ return err;
+ if (CFE_ISERR(iocb.status))
+ return iocb.status;
+ if (retlen)
+ *retlen = iocb.buffer.retlen;
+
+ return iocb.status;
+}
+
+int cfe_open(char *name)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_DEV_OPEN;
+ iocb.psize = sizeof(struct cfe_iocb_buf);
+ iocb.buffer.ptr = PTR_TO_CFE(name);
+ iocb.buffer.length = strlen(name);
+
+ err = cfe_iocb_dispatch(&iocb);
+ if (CFE_ISERR(err))
+ return err;
+ if (CFE_ISERR(iocb.status))
+ return iocb.status;
+
+ return iocb.handle;
+}
+
+int cfe_read(int handle, unsigned char *buffer, int length)
+{
+ return cfe_readblk(handle, 0, buffer, length);
+}
+
+int cfe_readblk(int handle, s64 offset, unsigned char *buffer, int length)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_DEV_READ;
+ iocb.handle = handle;
+ iocb.psize = sizeof(struct cfe_iocb_buf);
+ iocb.buffer.offset = offset;
+ iocb.buffer.ptr = PTR_TO_CFE(buffer);
+ iocb.buffer.length = length;
+
+ err = cfe_iocb_dispatch(&iocb);
+ if (CFE_ISERR(err))
+ return err;
+ if (CFE_ISERR(iocb.status))
+ return iocb.status;
+
+ return iocb.buffer.retlen;
+}
+
+int cfe_setenv(char *name, char *val)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_ENV_SET;
+ iocb.psize = sizeof(struct cfe_iocb_envbuf);
+ iocb.envbuf.name = PTR_TO_CFE(name);
+ iocb.envbuf.name_len = strlen(name);
+ iocb.envbuf.val = PTR_TO_CFE(val);
+ iocb.envbuf.val_len = strlen(val);
+
+ err = cfe_iocb_dispatch(&iocb);
+
+ return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_write(int handle, unsigned char *buffer, int length)
+{
+ return cfe_writeblk(handle, 0, buffer, length);
+}
+
+int cfe_writeblk(int handle, s64 offset, unsigned char *buffer, int length)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_DEV_WRITE;
+ iocb.handle = handle;
+ iocb.psize = sizeof(struct cfe_iocb_buf);
+ iocb.buffer.offset = offset;
+ iocb.buffer.ptr = PTR_TO_CFE(buffer);
+ iocb.buffer.length = length;
+
+ err = cfe_iocb_dispatch(&iocb);
+ if (CFE_ISERR(err))
+ return err;
+ if (CFE_ISERR(iocb.status))
+ return iocb.status;
+
+ return iocb.buffer.retlen;
+}
diff -urN linux.old/arch/mips/cfe/cfe_private.h linux.dev/arch/mips/cfe/cfe_private.h
--- linux.old/arch/mips/cfe/cfe_private.h 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/cfe/cfe_private.h 2007-01-25 23:34:01.000000000 +0100
@@ -0,0 +1,176 @@
+/*
+ * Broadcom Common Firmware Environment (CFE) support
+ *
+ * Copyright 2000, 2001, 2002
+ * Broadcom Corporation. All rights reserved.
+ *
+ * Copyright (C) 2006 Michael Buesch
+ *
+ * Original Authors: Mitch Lichtenberg, Chris Demetriou
+ *
+ * This software is furnished under license and may be used and copied only
+ * in accordance with the following terms and conditions. Subject to these
+ * conditions, you may download, copy, install, use, modify and distribute
+ * modified or unmodified copies of this software in source and/or binary
+ * form. No title or ownership is transferred hereby.
+ *
+ * 1) Any source code used, modified or distributed must reproduce and
+ * retain this copyright notice and list of conditions as they appear in
+ * the source file.
+ *
+ * 2) No right is granted to use any trade name, trademark, or logo of
+ * Broadcom Corporation. The "Broadcom Corporation" name may not be
+ * used to endorse or promote products derived from this software
+ * without the prior written permission of Broadcom Corporation.
+ *
+ * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
+ * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
+ * FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
+ * LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef LINUX_CFE_PRIVATE_H_
+#define LINUX_CFE_PRIVATE_H_
+
+#ifndef __ASSEMBLY__
+
+/* Seal indicating CFE's presence, passed to the kernel. */
+#define CFE_EPTSEAL 0x43464531
+
+#define CFE_CMD_FW_GETINFO 0
+#define CFE_CMD_FW_RESTART 1
+#define CFE_CMD_FW_BOOT 2
+#define CFE_CMD_FW_CPUCTL 3
+#define CFE_CMD_FW_GETTIME 4
+#define CFE_CMD_FW_MEMENUM 5
+#define CFE_CMD_FW_FLUSHCACHE 6
+
+#define CFE_CMD_DEV_GETHANDLE 9
+#define CFE_CMD_DEV_ENUM 10
+#define CFE_CMD_DEV_OPEN 11
+#define CFE_CMD_DEV_INPSTAT 12
+#define CFE_CMD_DEV_READ 13
+#define CFE_CMD_DEV_WRITE 14
+#define CFE_CMD_DEV_IOCTL 15
+#define CFE_CMD_DEV_CLOSE 16
+#define CFE_CMD_DEV_GETINFO 17
+
+#define CFE_CMD_ENV_ENUM 20
+#define CFE_CMD_ENV_GET 22
+#define CFE_CMD_ENV_SET 23
+#define CFE_CMD_ENV_DEL 24
+
+#define CFE_CMD_MAX 32
+
+#define CFE_CMD_VENDOR_USE 0x8000 /* codes above this are for customer use */
+
+typedef u64 cfe_uint_t;
+typedef s64 cfe_int_t;
+typedef s64 cfe_ptr_t;
+
+/* Cast a pointer from native to CFE-API pointer and back */
+#define CFE_TO_PTR(p) ((void *)(unsigned long)(p))
+#define PTR_TO_CFE(p) ((cfe_ptr_t)(unsigned long)(p))
+
+struct cfe_iocb_buf {
+ cfe_uint_t offset; /* offset on device (bytes) */
+ cfe_ptr_t ptr; /* pointer to a buffer */
+ cfe_uint_t length; /* length of this buffer */
+ cfe_uint_t retlen; /* returned length (for read ops) */
+ union {
+ cfe_uint_t ioctlcmd; /* IOCTL command (used only for IOCTLs) */
+ cfe_uint_t devflags; /* Returned device info flags */
+ };
+};
+
+struct cfe_iocb_inpstat {
+ cfe_uint_t status; /* 1 means input available */
+};
+
+struct cfe_iocb_envbuf {
+ cfe_int_t index; /* 0-based enumeration index */
+ cfe_ptr_t name; /* name string buffer */
+ cfe_int_t name_len; /* size of name buffer */
+ cfe_ptr_t val; /* value string buffer */
+ cfe_int_t val_len; /* size of value string buffer */
+};
+
+struct cfe_iocb_cpuctl {
+ cfe_uint_t number; /* cpu number to control */
+ cfe_uint_t command; /* command to issue to CPU */
+ cfe_uint_t start_addr; /* CPU start address */
+ cfe_uint_t gp; /* starting GP value */
+ cfe_uint_t sp; /* starting SP value */
+ cfe_uint_t a1; /* starting A1 value */
+};
+
+struct cfe_iocb_time {
+ cfe_int_t ticks; /* current time in ticks */
+};
+
+struct cfe_iocb_exitstat {
+ cfe_int_t status;
+};
+
+struct cfe_iocb_meminfo {
+ cfe_int_t index; /* 0-based enumeration index */
+ cfe_int_t type; /* type of memory block */
+ cfe_uint_t addr; /* physical start address */
+ cfe_uint_t size; /* block size */
+};
+
+struct cfe_iocb_fwinfo {
+ cfe_int_t version; /* major, minor, eco version */
+ cfe_int_t totalmem; /* total installed mem */
+ cfe_int_t flags; /* various flags */
+ cfe_int_t boardid; /* board ID */
+ cfe_int_t bootarea_va; /* VA of boot area */
+ cfe_int_t bootarea_pa; /* PA of boot area */
+ cfe_int_t bootarea_size; /* size of boot area */
+ cfe_int_t reserved1;
+ cfe_int_t reserved2;
+ cfe_int_t reserved3;
+};
+
+/* CFE I/O Control Block */
+struct cfe_iocb {
+ cfe_uint_t fcode; /* IOCB function code */
+ cfe_int_t status; /* return status */
+ cfe_int_t handle; /* file/device handle */
+ cfe_uint_t flags; /* flags for this IOCB */
+ cfe_uint_t psize; /* size of parameter list */
+ union {
+ struct cfe_iocb_buf buffer; /* buffer parameters */
+ struct cfe_iocb_inpstat inpstat; /* input status parameters */
+ struct cfe_iocb_envbuf envbuf; /* environment function parameters */
+ struct cfe_iocb_cpuctl cpuctl; /* CPU control parameters */
+ struct cfe_iocb_time time; /* timer parameters */
+ struct cfe_iocb_meminfo meminfo; /* memory arena info parameters */
+ struct cfe_iocb_fwinfo fwinfo; /* firmware information */
+ struct cfe_iocb_exitstat exitstat; /* Exit Status */
+ };
+};
+
+
+#include <linux/init.h>
+
+void __init cfe_setup(unsigned long fwarg0, unsigned long fwarg1,
+ unsigned long fwarg2, unsigned long fwarg3);
+
+#else /* __ASSEMBLY__ */
+
+ .macro cfe_early_init
+#ifdef CONFIG_CFE
+ jal cfe_setup
+#endif
+ .endm
+
+#endif /* __ASSEMBLY__ */
+#endif /* LINUX_CFE_PRIVATE_H_ */
diff -urN linux.old/arch/mips/cfe/Makefile linux.dev/arch/mips/cfe/Makefile
--- linux.old/arch/mips/cfe/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/arch/mips/cfe/Makefile 2007-01-25 23:34:01.000000000 +0100
@@ -0,0 +1,5 @@
+#
+# Makefile for the Broadcom Common Firmware Environment support
+#
+
+obj-y += cfe.o
diff -urN linux.old/arch/mips/Kconfig linux.dev/arch/mips/Kconfig
--- linux.old/arch/mips/Kconfig 2007-01-26 00:51:33.000000000 +0100
+++ linux.dev/arch/mips/Kconfig 2007-01-26 00:51:18.000000000 +0100
@@ -4,6 +4,10 @@
# Horrible source of confusion. Die, die, die ...
select EMBEDDED
+config CFE
+ bool
+ # Common Firmware Environment
+
mainmenu "Linux/MIPS Kernel Configuration"
menu "Machine selection"
@@ -222,6 +226,24 @@
Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
Olivetti M700-10 workstations.
+config BCM947XX
+ bool "Support for BCM947xx based boards"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SSB
+ select SSB_SERIAL
+ select SSB_DRIVER_PCICORE
+ select SSB_PCICORE_HOSTMODE
+ select SSB_DRIVER_MIPS
+ select SSB_DRIVER_EXTIF
+ select CFE
+ help
+ Support for BCM947xx based boards
+
config LASAT
bool "LASAT Networks platforms"
select DMA_NONCOHERENT
diff -urN linux.old/arch/mips/kernel/cpu-probe.c linux.dev/arch/mips/kernel/cpu-probe.c
--- linux.old/arch/mips/kernel/cpu-probe.c 2007-01-26 00:51:33.000000000 +0100
+++ linux.dev/arch/mips/kernel/cpu-probe.c 2007-01-25 23:34:01.000000000 +0100
@@ -723,6 +723,28 @@
}
+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c)
+{
+ decode_config1(c);
+ switch (c->processor_id & 0xff00) {
+ case PRID_IMP_BCM3302:
+ c->cputype = CPU_BCM3302;
+ c->isa_level = MIPS_CPU_ISA_M32R1;
+ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
+ MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER;
+ break;
+ case PRID_IMP_BCM4710:
+ c->cputype = CPU_BCM4710;
+ c->isa_level = MIPS_CPU_ISA_M32R1;
+ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
+ MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER;
+ break;
+ default:
+ c->cputype = CPU_UNKNOWN;
+ break;
+ }
+}
+
__init void cpu_probe(void)
{
struct cpuinfo_mips *c = &current_cpu_data;
@@ -745,6 +767,9 @@
case PRID_COMP_SIBYTE:
cpu_probe_sibyte(c);
break;
+ case PRID_COMP_BROADCOM:
+ cpu_probe_broadcom(c);
+ break;
case PRID_COMP_SANDCRAFT:
cpu_probe_sandcraft(c);
break;
diff -urN linux.old/arch/mips/kernel/proc.c linux.dev/arch/mips/kernel/proc.c
--- linux.old/arch/mips/kernel/proc.c 2007-01-26 00:51:33.000000000 +0100
+++ linux.dev/arch/mips/kernel/proc.c 2007-01-25 23:34:01.000000000 +0100
@@ -83,6 +83,8 @@
[CPU_VR4181] = "NEC VR4181",
[CPU_VR4181A] = "NEC VR4181A",
[CPU_SR71000] = "Sandcraft SR71000",
+ [CPU_BCM3302] = "Broadcom BCM3302",
+ [CPU_BCM4710] = "Broadcom BCM4710",
[CPU_PR4450] = "Philips PR4450",
};
diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
--- linux.old/arch/mips/Makefile 2007-01-26 00:51:33.000000000 +0100
+++ linux.dev/arch/mips/Makefile 2007-01-25 23:34:01.000000000 +0100
@@ -571,6 +571,18 @@
load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000
#
+# Broadcom BCM47XX boards
+#
+core-$(CONFIG_BCM947XX) += arch/mips/bcm947xx/
+cflags-$(CONFIG_BCM947XX) += -Iarch/mips/bcm947xx/include -Iinclude/asm-mips/mach-bcm947xx
+load-$(CONFIG_BCM947XX) := 0xffffffff80001000
+
+#
+# Common Firmware Environment
+#
+core-$(CONFIG_CFE) += arch/mips/cfe/
+
+#
# SNI RM200 PCI
#
core-$(CONFIG_SNI_RM200_PCI) += arch/mips/sni/
diff -urN linux.old/arch/mips/mm/tlbex.c linux.dev/arch/mips/mm/tlbex.c
--- linux.old/arch/mips/mm/tlbex.c 2007-01-26 00:51:33.000000000 +0100
+++ linux.dev/arch/mips/mm/tlbex.c 2007-01-25 23:34:01.000000000 +0100
@@ -880,6 +880,8 @@
case CPU_4KSC:
case CPU_20KC:
case CPU_25KF:
+ case CPU_BCM3302:
+ case CPU_BCM4710:
tlbw(p);
break;
diff -urN linux.old/drivers/Kconfig linux.dev/drivers/Kconfig
--- linux.old/drivers/Kconfig 2007-01-26 00:51:33.000000000 +0100
+++ linux.dev/drivers/Kconfig 2007-01-25 23:34:01.000000000 +0100
@@ -56,6 +56,8 @@
source "drivers/hwmon/Kconfig"
+source "drivers/ssb/Kconfig"
+
source "drivers/mfd/Kconfig"
source "drivers/media/Kconfig"
diff -urN linux.old/drivers/Makefile linux.dev/drivers/Makefile
--- linux.old/drivers/Makefile 2007-01-26 00:51:33.000000000 +0100
+++ linux.dev/drivers/Makefile 2007-01-25 23:34:01.000000000 +0100
@@ -77,3 +77,4 @@
obj-$(CONFIG_SUPERH) += sh/
obj-$(CONFIG_GENERIC_TIME) += clocksource/
obj-$(CONFIG_DMA_ENGINE) += dma/
+obj-$(CONFIG_SSB) += ssb/
diff -urN linux.old/drivers/ssb/core.c linux.dev/drivers/ssb/core.c
--- linux.old/drivers/ssb/core.c 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/ssb/core.c 2007-01-26 00:44:13.000000000 +0100
@@ -0,0 +1,805 @@
+/*
+ * Sonics Silicon Backplane
+ * Subsystem core
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "ssb_private.h"
+
+#include <linux/delay.h>
+#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_regs.h>
+
+#ifdef CONFIG_SSB_PCIHOST
+# include <linux/pci.h>
+#endif
+
+#ifdef CONFIG_SSB_PCMCIAHOST
+# include <pcmcia/cs_types.h>
+# include <pcmcia/cs.h>
+# include <pcmcia/cistpl.h>
+# include <pcmcia/ds.h>
+#endif
+
+
+MODULE_DESCRIPTION("Sonics Silicon Backplane driver");
+MODULE_LICENSE("GPL");
+
+
+static LIST_HEAD(attach_queue);
+static LIST_HEAD(buses);
+static int nr_buses;
+static DEFINE_MUTEX(buses_mutex);
+
+#define ssb_buses_lock() do { \
+ if (!is_early_boot()) \
+ mutex_lock(&buses_mutex); \
+ } while (0)
+
+#define ssb_buses_unlock() do { \
+ if (!is_early_boot()) \
+ mutex_unlock(&buses_mutex); \
+ } while (0)
+
+
+static struct ssb_device * ssb_device_get(struct ssb_device *dev)
+{
+ if (dev)
+ get_device(&dev->dev);
+ return dev;
+}
+
+static void ssb_device_put(struct ssb_device *dev)
+{
+ if (dev)
+ put_device(&dev->dev);
+}
+
+static void ssb_bus_resume(struct ssb_bus *bus)
+{
+printk("SSB BUS RESUME\n");
+ ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
+ ssb_chipco_resume(&bus->chipco);
+}
+
+static int ssb_device_resume(struct device *dev)
+{
+ struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+ struct ssb_driver *ssb_drv;
+ struct ssb_bus *bus;
+ int err = 0;
+
+printk("SSB DEV RESUME\n");
+ bus = ssb_dev->bus;
+ if (bus->suspend_cnt == bus->nr_devices)
+ ssb_bus_resume(bus);
+ bus->suspend_cnt--;
+ if (dev->driver) {
+ ssb_drv = drv_to_ssb_drv(dev->driver);
+ if (ssb_drv && ssb_drv->resume)
+ err = ssb_drv->resume(ssb_dev);
+ if (err)
+ goto out;
+ }
+out:
+ return err;
+}
+
+static void ssb_bus_suspend(struct ssb_bus *bus, pm_message_t state)
+{
+printk("SSB BUS SUSPEND\n");
+// ssb_chipco_suspend(&bus->chipco, state);
+// ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
+}
+
+static int ssb_device_suspend(struct device *dev, pm_message_t state)
+{
+ struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+ struct ssb_driver *ssb_drv;
+ struct ssb_bus *bus;
+ int err = 0;
+
+printk("SSB DEV SUSPEND\n");
+ if (dev->driver) {
+ ssb_drv = drv_to_ssb_drv(dev->driver);
+ if (ssb_drv && ssb_drv->suspend)
+ err = ssb_drv->suspend(ssb_dev, state);
+ if (err)
+ goto out;
+ }
+
+ bus = ssb_dev->bus;
+ bus->suspend_cnt++;
+ if (bus->suspend_cnt == bus->nr_devices) {
+ /* All devices suspended. Shutdown the bus. */
+ ssb_bus_suspend(bus, state);
+ }
+
+out:
+ return err;
+}
+
+static void ssb_device_shutdown(struct device *dev)
+{
+ struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+ struct ssb_driver *ssb_drv;
+
+ if (!dev->driver)
+ return;
+ ssb_drv = drv_to_ssb_drv(dev->driver);
+ if (ssb_drv && ssb_drv->shutdown)
+ ssb_drv->shutdown(ssb_dev);
+}
+
+static int ssb_device_remove(struct device *dev)
+{
+ struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+ struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
+
+ if (ssb_drv && ssb_drv->remove)
+ ssb_drv->remove(ssb_dev);
+ ssb_device_put(ssb_dev);
+
+ return 0;
+}
+
+static int ssb_device_probe(struct device *dev)
+{
+ struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+ struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
+ int err = 0;
+
+ ssb_device_get(ssb_dev);
+ if (ssb_drv && ssb_drv->probe)
+ err = ssb_drv->probe(ssb_dev, &ssb_dev->id);
+ if (err)
+ ssb_device_put(ssb_dev);
+
+ return err;
+}
+
+static int ssb_match_devid(const struct ssb_device_id *tabid,
+ const struct ssb_device_id *devid)
+{
+ if ((tabid->vendor != devid->vendor) &&
+ tabid->vendor != SSB_ANY_VENDOR)
+ return 0;
+ if ((tabid->coreid != devid->coreid) &&
+ tabid->coreid != SSB_ANY_ID)
+ return 0;
+ if ((tabid->revision != devid->revision) &&
+ tabid->revision != SSB_ANY_REV)
+ return 0;
+ return 1;
+}
+
+static int ssb_bus_match(struct device *dev, struct device_driver *drv)
+{
+ struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+ struct ssb_driver *ssb_drv = drv_to_ssb_drv(drv);
+ const struct ssb_device_id *id;
+
+ for (id = ssb_drv->id_table;
+ id->vendor || id->coreid || id->revision;
+ id++) {
+ if (ssb_match_devid(id, &ssb_dev->id))
+ return 1; /* found */
+ }
+
+ return 0;
+}
+
+struct bus_type ssb_bustype = {
+ .name = NULL, /* Intentionally NULL to indicate early boot */
+ .match = ssb_bus_match,
+ .probe = ssb_device_probe,
+ .remove = ssb_device_remove,
+ .shutdown = ssb_device_shutdown,
+ .suspend = ssb_device_suspend,
+ .resume = ssb_device_resume,
+};
+
+#define is_early_boot() (ssb_bustype.name == NULL)
+
+void ssb_bus_unregister(struct ssb_bus *bus)
+{
+ struct ssb_device *dev;
+ int i;
+
+ ssb_buses_lock();
+ for (i = bus->nr_devices - 1; i >= 0; i--) {
+ dev = &(bus->devices[i]);
+ device_unregister(&dev->dev);
+ }
+ list_del(&bus->list);
+ ssb_buses_unlock();
+
+ ssb_iounmap(bus);
+}
+EXPORT_SYMBOL(ssb_bus_unregister);
+
+static void ssb_release_dev(struct device *dev)
+{
+ /* Nothing, devices are allocated together with struct ssb_bus. */
+}
+
+/* Needs ssb_buses_lock() */
+static int ssb_attach_queued_buses(void)
+{
+ struct ssb_bus *bus, *n;
+ struct ssb_device *dev;
+ int i, err;
+
+ list_for_each_entry_safe(bus, n, &attach_queue, list) {
+ for (i = 0; i < bus->nr_devices; i++) {
+ dev = &(bus->devices[i]);
+
+ dev->dev.release = ssb_release_dev;
+ err = device_register(&dev->dev);
+ if (err) {
+ ssb_printk(KERN_ERR PFX
+ "Could not register %s\n",
+ dev->dev.bus_id);
+ }
+ }
+ list_move_tail(&bus->list, &buses);
+ }
+ return 0;
+}
+
+static void ssb_get_boardtype(struct ssb_bus *bus)
+{//FIXME for pcmcia?
+ if (bus->bustype != SSB_BUSTYPE_PCI) {
+ /* Must set board_vendor, board_type and board_rev
+ * before calling ssb_bus_*_register() */
+ assert(bus->board_vendor && bus->board_type);
+ return;
+ }
+ ssb_pci_get_boardtype(bus);
+}
+
+static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset)
+{
+ struct ssb_bus *bus = dev->bus;
+
+ offset += dev->core_index * SSB_CORE_SIZE;
+ return readw(bus->mmio + offset);
+}
+
+static u32 ssb_ssb_read32(struct ssb_device *dev, u16 offset)
+{
+ struct ssb_bus *bus = dev->bus;
+
+ offset += dev->core_index * SSB_CORE_SIZE;
+ return readl(bus->mmio + offset);
+}
+
+static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
+{
+ struct ssb_bus *bus = dev->bus;
+
+ offset += dev->core_index * SSB_CORE_SIZE;
+ writew(value, bus->mmio + offset);
+}
+
+static void ssb_ssb_write32(struct ssb_device *dev, u16 offset, u32 value)
+{
+ struct ssb_bus *bus = dev->bus;
+
+ offset += dev->core_index * SSB_CORE_SIZE;
+ writel(value, bus->mmio + offset);
+}
+
+static const struct ssb_bus_ops ssb_ssb_ops = {
+ .read16 = ssb_ssb_read16,
+ .read32 = ssb_ssb_read32,
+ .write16 = ssb_ssb_write16,
+ .write32 = ssb_ssb_write32,
+};
+
+static int ssb_bus_register(struct ssb_bus *bus,
+ unsigned long baseaddr)
+{
+ int err;
+
+ ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on ");
+ switch (bus->bustype) {
+ case SSB_BUSTYPE_SSB:
+ ssb_printk("address 0x%08lX\n", baseaddr);
+ break;
+ case SSB_BUSTYPE_PCI:
+#ifdef CONFIG_SSB_PCIHOST
+ ssb_printk("PCI device %s\n", bus->host_pci->dev.bus_id);
+#endif
+ break;
+ case SSB_BUSTYPE_PCMCIA:
+#ifdef CONFIG_SSB_PCMCIAHOST
+ ssb_printk("PCMCIA device %s\n", bus->host_pcmcia->devname);
+#endif
+ break;
+ }
+
+ spin_lock_init(&bus->bar_lock);
+ INIT_LIST_HEAD(&bus->list);
+
+ ssb_get_boardtype(bus);
+ /* Powerup the bus */
+ err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
+ if (err)
+ goto out;
+ ssb_buses_lock();
+ bus->busnumber = nr_buses;
+ /* Scan for devices (cores) */
+ err = ssb_bus_scan(bus, baseaddr);
+ if (err)
+ goto err_disable_xtal;
+
+ /* Init PCI-host device (if any) */
+ err = ssb_pci_init(bus);
+ if (err)
+ goto err_unmap;
+ /* Init PCMCIA-host device (if any) */
+ err = ssb_pcmcia_init(bus);
+ if (err)
+ goto err_unmap;
+
+ /* Initialize basic system devices (if available) */
+ ssb_chipcommon_init(&bus->chipco);
+ ssb_mipscore_init(&bus->mipscore);
+ ssb_pcicore_init(&bus->pcicore);
+
+ /* Queue it for attach */
+ list_add_tail(&bus->list, &attach_queue);
+ if (!is_early_boot()) {
+ /* This is not early boot, so we must attach the bus now */
+ err = ssb_attach_queued_buses();
+ if (err)
+ goto err_dequeue;
+ }
+ nr_buses++;
+ ssb_buses_unlock();
+
+out:
+ return err;
+
+err_dequeue:
+ list_del(&bus->list);
+err_unmap:
+ ssb_iounmap(bus);
+err_disable_xtal:
+ ssb_buses_unlock();
+ ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
+ goto out;
+}
+
+#ifdef CONFIG_SSB_PCIHOST
+int ssb_bus_pcibus_register(struct ssb_bus *bus,
+ struct pci_dev *host_pci)
+{
+ int err;
+
+ bus->bustype = SSB_BUSTYPE_PCI;
+ bus->host_pci = host_pci;
+ bus->ops = &ssb_pci_ops;
+
+ err = ssb_bus_register(bus, 0);
+
+ return err;
+}
+EXPORT_SYMBOL(ssb_bus_pcibus_register);
+#endif /* CONFIG_SSB_PCIHOST */
+
+#ifdef CONFIG_SSB_PCMCIAHOST
+int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
+ struct pcmcia_device *pcmcia_dev,
+ unsigned long baseaddr,
+ void (*fill_sprom)(struct ssb_sprom *sprom))
+{
+ int err;
+
+ bus->bustype = SSB_BUSTYPE_PCMCIA;
+ bus->host_pcmcia = pcmcia_dev;
+ bus->ops = &ssb_pcmcia_ops;
+ fill_sprom(&bus->sprom);
+
+ err = ssb_bus_register(bus, baseaddr);
+
+ return err;
+}
+EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
+#endif /* CONFIG_SSB_PCMCIAHOST */
+
+int ssb_bus_ssbbus_register(struct ssb_bus *bus,
+ unsigned long baseaddr,
+ void (*fill_sprom)(struct ssb_sprom *sprom))
+{
+ int err;
+
+ bus->bustype = SSB_BUSTYPE_SSB;
+ bus->ops = &ssb_ssb_ops;
+ fill_sprom(&bus->sprom);
+ err = ssb_bus_register(bus, baseaddr);
+
+ return err;
+}
+
+int __ssb_driver_register(struct ssb_driver *drv, struct module *owner)
+{
+ drv->drv.name = drv->name;
+ drv->drv.bus = &ssb_bustype;
+ drv->drv.owner = owner;
+
+ return driver_register(&drv->drv);
+}
+EXPORT_SYMBOL(__ssb_driver_register);
+
+void ssb_driver_unregister(struct ssb_driver *drv)
+{
+ driver_unregister(&drv->drv);
+}
+EXPORT_SYMBOL(ssb_driver_unregister);
+
+void ssb_set_devtypedata(struct ssb_device *dev, void *data)
+{
+ struct ssb_bus *bus = dev->bus;
+ struct ssb_device *ent;
+ int i;
+
+ for (i = 0; i < bus->nr_devices; i++) {
+ ent = &(bus->devices[i]);
+ if (ent->id.vendor != dev->id.vendor)
+ continue;
+ if (ent->id.coreid != dev->id.coreid)
+ continue;
+
+ ent->devtypedata = data;
+ }
+}
+EXPORT_SYMBOL(ssb_set_devtypedata);
+
+static u32 clkfactor_f6_resolve(u32 v)
+{
+ /* map the magic values */
+ switch (v) {
+ case SSB_CHIPCO_CLK_F6_2:
+ return 2;
+ case SSB_CHIPCO_CLK_F6_3:
+ return 3;
+ case SSB_CHIPCO_CLK_F6_4:
+ return 4;
+ case SSB_CHIPCO_CLK_F6_5:
+ return 5;
+ case SSB_CHIPCO_CLK_F6_6:
+ return 6;
+ case SSB_CHIPCO_CLK_F6_7:
+ return 7;
+ }
+ return 0;
+}
+
+/* Calculate the speed the backplane would run at a given set of clockcontrol values */
+u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m)
+{
+ u32 n1, n2, clock, m1, m2, m3, mc;
+
+ n1 = (n & SSB_CHIPCO_CLK_N1);
+ n2 = ((n & SSB_CHIPCO_CLK_N2) >> SSB_CHIPCO_CLK_N2_SHIFT);
+
+ switch (plltype) {
+ case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
+ if (m & SSB_CHIPCO_CLK_T6_MMASK)
+ return SSB_CHIPCO_CLK_T6_M0;
+ return SSB_CHIPCO_CLK_T6_M1;
+ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
+ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
+ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
+ case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
+ n1 = clkfactor_f6_resolve(n1);
+ n2 += SSB_CHIPCO_CLK_F5_BIAS;
+ break;
+ case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */
+ n1 += SSB_CHIPCO_CLK_T2_BIAS;
+ n2 += SSB_CHIPCO_CLK_T2_BIAS;
+ assert((n1 >= 2) && (n1 <= 7));
+ assert((n2 >= 5) && (n2 <= 23));
+ break;
+ case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */
+ return 100000000;
+ default:
+ assert(0);
+ }
+
+ switch (plltype) {
+ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
+ case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
+ clock = SSB_CHIPCO_CLK_BASE2 * n1 * n2;
+ break;
+ default:
+ clock = SSB_CHIPCO_CLK_BASE1 * n1 * n2;
+ }
+ if (!clock)
+ return 0;
+
+ m1 = (m & SSB_CHIPCO_CLK_M1);
+ m2 = ((m & SSB_CHIPCO_CLK_M2) >> SSB_CHIPCO_CLK_M2_SHIFT);
+ m3 = ((m & SSB_CHIPCO_CLK_M3) >> SSB_CHIPCO_CLK_M3_SHIFT);
+ mc = ((m & SSB_CHIPCO_CLK_MC) >> SSB_CHIPCO_CLK_MC_SHIFT);
+
+ switch (plltype) {
+ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
+ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
+ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
+ case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
+ m1 = clkfactor_f6_resolve(m1);
+ if ((plltype == SSB_PLLTYPE_1) ||
+ (plltype == SSB_PLLTYPE_3))
+ m2 += SSB_CHIPCO_CLK_F5_BIAS;
+ else
+ m2 = clkfactor_f6_resolve(m2);
+ m3 = clkfactor_f6_resolve(m3);
+
+ switch (mc) {
+ case SSB_CHIPCO_CLK_MC_BYPASS:
+ return clock;
+ case SSB_CHIPCO_CLK_MC_M1:
+ return (clock / m1);
+ case SSB_CHIPCO_CLK_MC_M1M2:
+ return (clock / (m1 * m2));
+ case SSB_CHIPCO_CLK_MC_M1M2M3:
+ return (clock / (m1 * m2 * m3));
+ case SSB_CHIPCO_CLK_MC_M1M3:
+ return (clock / (m1 * m3));
+ }
+ return 0;
+ case SSB_PLLTYPE_2:
+ m1 += SSB_CHIPCO_CLK_T2_BIAS;
+ m2 += SSB_CHIPCO_CLK_T2M2_BIAS;
+ m3 += SSB_CHIPCO_CLK_T2_BIAS;
+ assert((m1 >= 2) && (m1 <= 7));
+ assert((m2 >= 3) && (m2 <= 10));
+ assert((m3 >= 2) && (m3 <= 7));
+
+ if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP))
+ clock /= m1;
+ if (!(mc & SSB_CHIPCO_CLK_T2MC_M2BYP))
+ clock /= m2;
+ if (!(mc & SSB_CHIPCO_CLK_T2MC_M3BYP))
+ clock /= m3;
+ return clock;
+ default:
+ assert(0);
+ }
+ return 0;
+}
+
+/* Get the current speed the backplane is running at */
+u32 ssb_clockspeed(struct ssb_bus *bus)
+{
+ u32 rate;
+ u32 plltype;
+ u32 clkctl_n, clkctl_m;
+
+ //TODO if EXTIF: PLLTYPE == 1, read n from clockcontrol_n, m from clockcontrol_sb
+
+ if (bus->chipco.dev) {
+ ssb_chipco_get_clockcontrol(&bus->chipco, &plltype,
+ &clkctl_n, &clkctl_m);
+ } else
+ return 0;
+
+ if (bus->chip_id == 0x5365) {
+ rate = 100000000;
+ } else {
+ rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
+ if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */
+ rate /= 2;
+ }
+
+ return rate;
+}
+EXPORT_SYMBOL(ssb_clockspeed);
+
+int ssb_device_is_enabled(struct ssb_device *dev)
+{
+ u32 val;
+
+ val = ssb_read32(dev, SSB_TMSLOW);
+ val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | SSB_TMSLOW_REJECT;
+
+ return (val == SSB_TMSLOW_CLOCK);
+}
+EXPORT_SYMBOL(ssb_device_is_enabled);
+
+void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags)
+{
+ u32 val;
+
+ ssb_device_disable(dev, core_specific_flags);
+ ssb_write32(dev, SSB_TMSLOW,
+ SSB_TMSLOW_RESET | SSB_TMSLOW_CLOCK |
+ SSB_TMSLOW_FGC | core_specific_flags);
+ /* flush */
+ ssb_read32(dev, SSB_TMSLOW);
+ udelay(1);
+
+ /* Clear SERR if set. This is a hw bug workaround. */
+ if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_SERR)
+ ssb_write32(dev, SSB_TMSHIGH, 0);
+
+ val = ssb_read32(dev, SSB_IMSTATE);
+ if (val & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) {
+ val &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO);
+ ssb_write32(dev, SSB_IMSTATE, val);
+ }
+
+ ssb_write32(dev, SSB_TMSLOW,
+ SSB_TMSLOW_CLOCK | SSB_TMSLOW_FGC |
+ core_specific_flags);
+ /* flush */
+ ssb_read32(dev, SSB_TMSLOW);
+ udelay(1);
+
+ ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_CLOCK |
+ core_specific_flags);
+ /* flush */
+ ssb_read32(dev, SSB_TMSLOW);
+ udelay(1);
+}
+EXPORT_SYMBOL(ssb_device_enable);
+
+static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask,
+ int timeout, int set)
+{
+ int i;
+ u32 val;
+
+ for (i = 0; i < timeout; i++) {
+ val = ssb_read32(dev, reg);
+ if (set) {
+ if (val & bitmask)
+ return 0;
+ } else {
+ if (!(val & bitmask))
+ return 0;
+ }
+ udelay(10);
+ }
+ printk(KERN_ERR PFX "Timeout waiting for bitmask %08X on "
+ "register %04X to %s.\n",
+ bitmask, reg, (set ? "set" : "clear"));
+
+ return -ETIMEDOUT;
+}
+
+void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
+{
+ if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
+ return;
+
+ ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_REJECT | SSB_TMSLOW_CLOCK);
+ ssb_wait_bit(dev, SSB_TMSLOW, SSB_TMSLOW_REJECT, 1000, 1);
+ ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
+ ssb_write32(dev, SSB_TMSLOW,
+ SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
+ SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET |
+ core_specific_flags);
+ /* flush */
+ ssb_read32(dev, SSB_TMSLOW);
+ udelay(1);
+
+ ssb_write32(dev, SSB_TMSLOW,
+ SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET |
+ core_specific_flags);
+ /* flush */
+ ssb_read32(dev, SSB_TMSLOW);
+ udelay(1);
+}
+EXPORT_SYMBOL(ssb_device_disable);
+
+u32 ssb_dma_translation(struct ssb_device *dev)
+{
+ switch(dev->bus->bustype) {
+ case SSB_BUSTYPE_SSB:
+ return 0;
+ case SSB_BUSTYPE_PCI:
+ case SSB_BUSTYPE_PCMCIA:
+ return SSB_PCI_DMA;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(ssb_dma_translation);
+
+int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask)
+{
+ struct device *dev = &ssb_dev->dev;
+
+#ifdef CONFIG_SSB_PCIHOST
+ if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI &&
+ !dma_supported(dev, mask))
+ return -EIO;
+#endif
+ dev->coherent_dma_mask = mask;
+ dev->dma_mask = &dev->coherent_dma_mask;
+
+ return 0;
+}
+EXPORT_SYMBOL(ssb_dma_set_mask);
+
+u32 ssb_admatch_base(u32 adm)
+{
+ u32 base = 0;
+
+ switch (adm & SSB_ADM_TYPE) {
+ case SSB_ADM_TYPE0:
+ base = (adm & SSB_ADM_BASE0);
+ break;
+ case SSB_ADM_TYPE1:
+ assert(!(adm & SSB_ADM_NEG)); /* unsupported */
+ base = (adm & SSB_ADM_BASE1);
+ break;
+ case SSB_ADM_TYPE2:
+ assert(!(adm & SSB_ADM_NEG)); /* unsupported */
+ base = (adm & SSB_ADM_BASE2);
+ break;
+ default:
+ assert(0);
+ }
+
+ return base;
+}
+EXPORT_SYMBOL(ssb_admatch_base);
+
+u32 ssb_admatch_size(u32 adm)
+{
+ u32 size = 0;
+
+ switch (adm & SSB_ADM_TYPE) {
+ case SSB_ADM_TYPE0:
+ size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT);
+ break;
+ case SSB_ADM_TYPE1:
+ assert(!(adm & SSB_ADM_NEG)); /* unsupported */
+ size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT);
+ break;
+ case SSB_ADM_TYPE2:
+ assert(!(adm & SSB_ADM_NEG)); /* unsupported */
+ size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT);
+ break;
+ default:
+ assert(0);
+ }
+ size = (1 << (size + 1));
+
+ return size;
+}
+EXPORT_SYMBOL(ssb_admatch_size);
+
+static int __init ssb_modinit(void)
+{
+ int err;
+
+ ssb_bustype.name = "ssb";
+ err = bus_register(&ssb_bustype);
+ if (err)
+ return err;
+
+ /* Maybe we already registered some buses at early boot.
+ * Check for this and attach them
+ */
+ ssb_buses_lock();
+ err = ssb_attach_queued_buses();
+ ssb_buses_unlock();
+
+ return err;
+}
+subsys_initcall(ssb_modinit);
+
+static void __exit ssb_modexit(void)
+{
+ bus_unregister(&ssb_bustype);
+}
+module_exit(ssb_modexit)
diff -urN linux.old/drivers/ssb/driver_chipcommon/chipcommon.c linux.dev/drivers/ssb/driver_chipcommon/chipcommon.c
--- linux.old/drivers/ssb/driver_chipcommon/chipcommon.c 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/ssb/driver_chipcommon/chipcommon.c 2007-01-26 00:44:13.000000000 +0100
@@ -0,0 +1,403 @@
+/*
+ * Sonics Silicon Backplane
+ * Broadcom ChipCommon core driver
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_regs.h>
+#include <linux/pci.h>
+
+#include "../ssb_private.h"
+
+
+/* Clock sources */
+enum {
+ /* PCI clock */
+ SSB_CHIPCO_CLKSRC_PCI,
+ /* Crystal slow clock oscillator */
+ SSB_CHIPCO_CLKSRC_XTALOS,
+ /* Low power oscillator */
+ SSB_CHIPCO_CLKSRC_LOPWROS,
+};
+
+
+static inline u32 chipco_read32(struct ssb_chipcommon *cc,
+ u16 offset)
+{
+ return ssb_read32(cc->dev, offset);
+}
+
+static inline void chipco_write32(struct ssb_chipcommon *cc,
+ u16 offset,
+ u32 value)
+{
+ ssb_write32(cc->dev, offset, value);
+}
+
+void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
+ enum ssb_clkmode mode)
+{
+ struct ssb_device *ccdev = cc->dev;
+ struct ssb_bus *bus;
+ u32 tmp;
+
+ if (!ccdev)
+ return;
+ bus = ccdev->bus;
+ /* chipcommon cores prior to rev6 don't support dynamic clock control */
+ if (ccdev->id.revision < 6)
+ return;
+ /* chipcommon cores rev10 are a whole new ball game */
+ if (ccdev->id.revision >= 10)
+ return;
+ if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
+ return;
+
+ switch (mode) {
+ case SSB_CLKMODE_SLOW:
+ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+ tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW;
+ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+ break;
+ case SSB_CLKMODE_FAST:
+ ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
+ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
+ tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
+ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+ break;
+ case SSB_CLKMODE_DYNAMIC:
+ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
+ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
+ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
+ if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
+ tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
+ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+
+ /* for dynamic control, we have to release our xtal_pu "force on" */
+ if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
+ ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
+ break;
+ default:
+ assert(0);
+ }
+}
+EXPORT_SYMBOL(ssb_chipco_set_clockmode);
+
+/* Get the Slow Clock Source */
+static int chipco_pctl_get_slowclksrc(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+ u32 tmp = 0;
+
+ if (cc->dev->id.revision < 6) {
+ if (bus->bustype == SSB_BUSTYPE_SSB /*TODO ||
+ bus->bustype == SSB_BUSTYPE_PCMCIA*/)
+ return SSB_CHIPCO_CLKSRC_XTALOS;
+ if (bus->bustype == SSB_BUSTYPE_PCI) {
+ pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT, &tmp);
+ if (tmp & 0x10)
+ return SSB_CHIPCO_CLKSRC_PCI;
+ return SSB_CHIPCO_CLKSRC_XTALOS;
+ }
+ }
+ if (cc->dev->id.revision < 10) {
+ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+ tmp &= 0x7;
+ if (tmp == 0)
+ return SSB_CHIPCO_CLKSRC_LOPWROS;
+ if (tmp == 1)
+ return SSB_CHIPCO_CLKSRC_XTALOS;
+ if (tmp == 2)
+ return SSB_CHIPCO_CLKSRC_PCI;
+ }
+
+ return SSB_CHIPCO_CLKSRC_XTALOS;
+}
+
+/* Get maximum or minimum (depending on get_max flag) slowclock frequency. */
+static int chipco_pctl_clockfreqlimit(struct ssb_chipcommon *cc, int get_max)
+{
+ int limit;
+ int clocksrc;
+ int divisor;
+ u32 tmp;
+
+ clocksrc = chipco_pctl_get_slowclksrc(cc);
+ if (cc->dev->id.revision < 6) {
+ switch (clocksrc) {
+ case SSB_CHIPCO_CLKSRC_PCI:
+ divisor = 64;
+ break;
+ case SSB_CHIPCO_CLKSRC_XTALOS:
+ divisor = 32;
+ break;
+ default:
+ assert(0);
+ divisor = 1;
+ }
+ } else if (cc->dev->id.revision < 10) {
+ switch (clocksrc) {
+ case SSB_CHIPCO_CLKSRC_LOPWROS:
+ divisor = 1;
+ break;
+ case SSB_CHIPCO_CLKSRC_XTALOS:
+ case SSB_CHIPCO_CLKSRC_PCI:
+ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+ divisor = (tmp >> 16) + 1;
+ divisor *= 4;
+ break;
+ default:
+ assert(0);
+ divisor = 1;
+ }
+ } else {
+ tmp = chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL);
+ divisor = (tmp >> 16) + 1;
+ divisor *= 4;
+ }
+
+ switch (clocksrc) {
+ case SSB_CHIPCO_CLKSRC_LOPWROS:
+ if (get_max)
+ limit = 43000;
+ else
+ limit = 25000;
+ break;
+ case SSB_CHIPCO_CLKSRC_XTALOS:
+ if (get_max)
+ limit = 20200000;
+ else
+ limit = 19800000;
+ break;
+ case SSB_CHIPCO_CLKSRC_PCI:
+ if (get_max)
+ limit = 34000000;
+ else
+ limit = 25000000;
+ break;
+ default:
+ assert(0);
+ limit = 0;
+ }
+ limit /= divisor;
+
+ return limit;
+}
+
+static void chipco_powercontrol_init(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+
+ if (bus->chip_id == 0x4321) {
+ if (bus->chip_rev == 0)
+ chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0x3A4);
+ else if (bus->chip_rev == 1)
+ chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0xA4);
+ }
+
+ if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
+ return;
+
+ if (cc->dev->id.revision >= 10) {
+ /* Set Idle Power clock rate to 1Mhz */
+ chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
+ (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) &
+ 0x0000FFFF) | 0x00040000);
+ } else {
+ int maxfreq;
+
+ maxfreq = chipco_pctl_clockfreqlimit(cc, 1);
+ chipco_write32(cc, SSB_CHIPCO_PLLONDELAY,
+ (maxfreq * 150 + 999999) / 1000000);
+ chipco_write32(cc, SSB_CHIPCO_FREFSELDELAY,
+ (maxfreq * 15 + 999999) / 1000000);
+ }
+}
+
+static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+ int minfreq;
+ unsigned int tmp;
+ u32 pll_on_delay;
+
+ if (bus->bustype != SSB_BUSTYPE_PCI)
+ return;
+ if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
+ return;
+
+ minfreq = chipco_pctl_clockfreqlimit(cc, 0);
+ pll_on_delay = chipco_read32(cc, SSB_CHIPCO_PLLONDELAY);
+ tmp = (((pll_on_delay + 2) * 1000000) + (minfreq - 1)) / minfreq;
+ assert((tmp & ~0xFFFF) == 0);
+
+ cc->fast_pwrup_delay = tmp;
+}
+
+void ssb_chipcommon_init(struct ssb_chipcommon *cc)
+{
+ if (!cc->dev)
+ return; /* We don't have a ChipCommon */
+ ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
+ chipco_powercontrol_init(cc);
+ calc_fast_powerup_delay(cc);
+}
+
+void ssb_chipco_suspend(struct ssb_chipcommon *cc, pm_message_t state)
+{
+ if (!cc->dev)
+ return;
+ ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
+}
+
+void ssb_chipco_resume(struct ssb_chipcommon *cc)
+{
+ if (!cc->dev)
+ return;
+ ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
+ chipco_powercontrol_init(cc);
+}
+
+void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
+ u32 *plltype, u32 *n, u32 *m)
+{
+ *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
+ *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
+ switch (*plltype) {
+ case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
+ *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
+ break;
+ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
+ if (cc->dev->bus->chip_id != 0x5365) {
+ *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
+ break;
+ }
+ /* Fallthough */
+ default:
+ *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
+ }
+}
+
+void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
+ unsigned long ns)
+{
+ struct ssb_device *dev = cc->dev;
+ struct ssb_bus *bus = dev->bus;
+ u32 tmp;
+
+ /* set register for external IO to control LED. */
+ chipco_write32(cc, SSB_CHIPCO_PROG_CFG, 0x11);
+ tmp = ceildiv(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */
+ tmp |= ceildiv(40, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 40ns */
+ tmp |= ceildiv(240, ns); /* Waitcount-0 = 240ns */
+ chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */
+
+ /* Set timing for the flash */
+ tmp = ceildiv(10, ns) << SSB_FLASH_WCNT_3_SHIFT; /* Waitcount-3 = 10nS */
+ tmp |= ceildiv(10, ns) << SSB_FLASH_WCNT_1_SHIFT; /* Waitcount-1 = 10nS */
+ tmp |= ceildiv(120, ns); /* Waitcount-0 = 120nS */
+ if ((bus->chip_id == 0x5365) ||
+ (dev->id.revision < 9))
+ chipco_write32(cc, SSB_CHIPCO_FLASH_WAITCNT, tmp);
+ if ((bus->chip_id == 0x5365) ||
+ (dev->id.revision < 9) ||
+ ((bus->chip_id == 0x5350) && (bus->chip_rev == 0)))
+ chipco_write32(cc, SSB_CHIPCO_PCMCIA_MEMWAIT, tmp);
+
+ if (bus->chip_id == 0x5350) {
+ /* Enable EXTIF */
+ tmp = ceildiv(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */
+ tmp |= ceildiv(20, ns) << SSB_PROG_WCNT_2_SHIFT; /* Waitcount-2 = 20ns */
+ tmp |= ceildiv(100, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 100ns */
+ tmp |= ceildiv(120, ns); /* Waitcount-0 = 120ns */
+ chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */
+ }
+}
+
+
+#ifdef CONFIG_SSB_SERIAL
+int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
+ struct ssb_serial_port *ports)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+ int nr_ports = 0;
+ u32 plltype;
+ unsigned int irq;
+ u32 baud_base, div;
+ u32 i, n;
+
+ plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
+ irq = ssb_mips_irq(cc->dev);
+
+ if (plltype == SSB_PLLTYPE_1) {
+ /* PLL clock */
+ baud_base = ssb_calc_clock_rate(plltype,
+ chipco_read32(cc, SSB_CHIPCO_CLOCK_N),
+ chipco_read32(cc, SSB_CHIPCO_CLOCK_M2));
+ div = 1;
+ } else {
+ if (cc->dev->id.revision >= 11) {
+ /* Fixed ALP clock */
+ baud_base = 20000000;
+ div = 1;
+ /* Set the override bit so we don't divide it */
+ chipco_write32(cc, SSB_CHIPCO_CORECTL,
+ SSB_CHIPCO_CORECTL_UARTCLK0);
+ } else if (cc->dev->id.revision >= 3) {
+ /* Internal backplane clock */
+ baud_base = ssb_clockspeed(bus);
+ div = 2; /* Minimum divisor */
+ chipco_write32(cc, SSB_CHIPCO_CLKDIV,
+ (chipco_read32(cc, SSB_CHIPCO_CLKDIV)
+ & ~SSB_CHIPCO_CLKDIV_UART) | div);
+ } else {
+ /* Fixed internal backplane clock */
+ baud_base = 88000000;
+ div = 48;
+ }
+
+ /* Clock source depends on strapping if UartClkOverride is unset */
+ if ((cc->dev->id.revision > 0) &&
+ !(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) {
+ if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) ==
+ SSB_CHIPCO_CAP_UARTCLK_INT) {
+ /* Internal divided backplane clock */
+ baud_base /= div;
+ } else {
+ /* Assume external clock of 1.8432 MHz */
+ baud_base = 1843200;
+ }
+ }
+ }
+
+ /* Determine the registers of the UARTs */
+ n = (cc->capabilities & SSB_CHIPCO_CAP_NRUART);
+ for (i = 0; i < n; i++) {
+ void __iomem *cc_mmio;
+ void __iomem *uart_regs;
+
+ cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE);
+ uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA;
+ /* Offset changed at after rev 0 */
+ if (cc->dev->id.revision == 0)
+ uart_regs += (i * 8);
+ else
+ uart_regs += (i * 256);
+
+ nr_ports++;
+ ports[i].regs = uart_regs;
+ ports[i].irq = irq;
+ ports[i].baud_base = baud_base;
+ ports[i].reg_shift = 0;
+ }
+
+ return nr_ports;
+}
+#endif /* CONFIG_SSB_SERIAL */
diff -urN linux.old/drivers/ssb/driver_mips/mips.c linux.dev/drivers/ssb/driver_mips/mips.c
--- linux.old/drivers/ssb/driver_mips/mips.c 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/ssb/driver_mips/mips.c 2007-01-26 00:44:13.000000000 +0100
@@ -0,0 +1,258 @@
+/*
+ * Sonics Silicon Backplane
+ * Broadcom MIPS core driver
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/ssb/ssb.h>
+
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <asm/time.h>
+
+#include "../ssb_private.h"
+
+
+static inline u32 mips_read32(struct ssb_mipscore *mcore,
+ u16 offset)
+{
+ return ssb_read32(mcore->dev, offset);
+}
+
+static inline void mips_write32(struct ssb_mipscore *mcore,
+ u16 offset,
+ u32 value)
+{
+ ssb_write32(mcore->dev, offset, value);
+}
+
+static const u32 ipsflag_irq_mask[] = {
+ 0,
+ SSB_IPSFLAG_IRQ1,
+ SSB_IPSFLAG_IRQ2,
+ SSB_IPSFLAG_IRQ3,
+ SSB_IPSFLAG_IRQ4,
+};
+
+static const u32 ipsflag_irq_shift[] = {
+ 0,
+ SSB_IPSFLAG_IRQ1_SHIFT,
+ SSB_IPSFLAG_IRQ2_SHIFT,
+ SSB_IPSFLAG_IRQ3_SHIFT,
+ SSB_IPSFLAG_IRQ4_SHIFT,
+};
+
+static inline u32 ssb_irqflag(struct ssb_device *dev)
+{
+ return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
+}
+
+/* Get the MIPS IRQ assignment for a specified device.
+ * If unassigned, 0 is returned.
+ */
+unsigned int ssb_mips_irq(struct ssb_device *dev)
+{
+ struct ssb_bus *bus = dev->bus;
+ u32 irqflag;
+ u32 ipsflag;
+ u32 tmp;
+ unsigned int irq;
+
+ irqflag = ssb_irqflag(dev);
+ ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG);
+ for (irq = 1; irq <= 4; irq++) {
+ tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]);
+ if (tmp == irqflag)
+ break;
+ }
+ if (irq == 5)
+ irq = 0;
+
+ return irq;
+}
+
+static void clear_irq(struct ssb_bus *bus, unsigned int irq)
+{
+ struct ssb_device *dev = bus->mipscore.dev;
+
+ /* Clear the IRQ in the MIPScore backplane registers */
+ if (irq == 0) {
+ ssb_write32(dev, SSB_INTVEC, 0);
+ } else {
+ ssb_write32(dev, SSB_IPSFLAG,
+ ssb_read32(dev, SSB_IPSFLAG) |
+ ipsflag_irq_mask[irq]);
+ }
+}
+
+static void set_irq(struct ssb_device *dev, unsigned int irq)
+{
+ unsigned int oldirq = ssb_mips_irq(dev);
+ struct ssb_bus *bus = dev->bus;
+ struct ssb_device *mdev = bus->mipscore.dev;
+ u32 irqflag = ssb_irqflag(dev);
+
+ dev->irq = irq + 2;
+
+ ssb_dprintk(KERN_INFO PFX
+ "set_irq: core 0x%04x, irq %d => %d\n",
+ dev->id.coreid, oldirq, irq);
+ /* clear the old irq */
+ if (oldirq == 0)
+ ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)));
+ else
+ clear_irq(bus, oldirq);
+
+ /* assign the new one */
+ if (irq == 0)
+ ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)));
+
+ irqflag <<= ipsflag_irq_shift[irq];
+ irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]);
+ ssb_write32(mdev, SSB_IPSFLAG, irqflag);
+}
+
+/* XXX: leave here or move into separate extif driver? */
+static int ssb_extif_serial_init(struct ssb_device *dev, struct ssb_serial_ports *ports)
+{
+
+}
+
+
+static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
+{
+ struct ssb_bus *bus = mcore->dev->bus;
+
+ //TODO if (EXTIF available
+#if 0
+ extifregs_t *eir = (extifregs_t *) regs;
+ sbconfig_t *sb;
+
+ /* Determine external UART register base */
+ sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF);
+ base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1)));
+
+ /* Determine IRQ */
+ irq = sb_irq(sbh);
+
+ /* Disable GPIO interrupt initially */
+ W_REG(&eir->gpiointpolarity, 0);
+ W_REG(&eir->gpiointmask, 0);
+
+ /* Search for external UARTs */
+ n = 2;
+ for (i = 0; i < 2; i++) {
+ regs = (void *) REG_MAP(base + (i * 8), 8);
+ if (BCMINIT(serial_exists)(regs)) {
+ /* Set GPIO 1 to be the external UART IRQ */
+ W_REG(&eir->gpiointmask, 2);
+ if (add)
+ add(regs, irq, 13500000, 0);
+ }
+ }
+
+ /* Add internal UART if enabled */
+ if (R_REG(&eir->corecontrol) & CC_UE)
+ if (add)
+ add((void *) &eir->uartdata, irq, sb_clock(sbh), 2);
+
+#endif
+ if (bus->extif.dev)
+ mcore->nr_serial_ports = ssb_extif_serial_init(&bus->extif, mcore->serial_ports);
+ else if (bus->chipco.dev)
+ mcore->nr_serial_ports = ssb_chipco_serial_init(&bus->chipco, mcore->serial_ports);
+ else
+ mcore->nr_serial_ports = 0;
+}
+
+static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
+{
+ struct ssb_bus *bus = mcore->dev->bus;
+
+ if (bus->chipco.dev) {
+ mcore->flash_window = 0x1c000000;
+ mcore->flash_window_size = 0x800000;
+ } else {
+ mcore->flash_window = 0x1fc00000;
+ mcore->flash_window_size = 0x400000;
+ }
+}
+
+
+static void ssb_cpu_clock(struct ssb_mipscore *mcore)
+{
+}
+
+void ssb_mipscore_init(struct ssb_mipscore *mcore)
+{
+ struct ssb_bus *bus = mcore->dev->bus;
+ struct ssb_device *dev;
+ unsigned long hz, ns;
+ unsigned int irq, i;
+
+ if (!mcore->dev)
+ return; /* We don't have a MIPS core */
+
+ ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n");
+
+ hz = ssb_clockspeed(bus);
+ if (!hz)
+ hz = 100000000;
+ ns = 1000000000 / hz;
+
+//TODO
+#if 0
+ if (have EXTIF) {
+ /* Initialize extif so we can get to the LEDs and external UART */
+ W_REG(&eir->prog_config, CF_EN);
+
+ /* Set timing for the flash */
+ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
+ tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */
+ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */
+ W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */
+
+ /* Set programmable interface timing for external uart */
+ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
+ tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */
+ tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */
+ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */
+ W_REG(&eir->prog_waitcount, tmp);
+ }
+ else... chipcommon
+#endif
+ if (bus->chipco.dev)
+ ssb_chipco_timing_init(&bus->chipco, ns);
+
+ /* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
+ for (irq = 2, i = 0; i < bus->nr_devices; i++) {
+ dev = &(bus->devices[i]);
+ dev->irq = ssb_mips_irq(dev) + 2;
+ switch(dev->id.coreid) {
+ case SSB_DEV_USB11_HOST:
+ /* shouldn't need a separate irq line for non-4710, most of them have a proper
+ * external usb controller on the pci */
+ if ((bus->chip_id == 0x4710) && (irq <= 4)) {
+ set_irq(dev, irq++);
+ break;
+ }
+ case SSB_DEV_PCI:
+ case SSB_DEV_ETHERNET:
+ case SSB_DEV_80211:
+ case SSB_DEV_USB20_HOST:
+ /* These devices get their own IRQ line if available, the rest goes on IRQ0 */
+ if (irq <= 4) {
+ set_irq(dev, irq++);
+ break;
+ }
+ }
+ }
+
+ ssb_mips_serial_init(mcore);
+ ssb_mips_flash_detect(mcore);
+}
diff -urN linux.old/drivers/ssb/driver_pci/pcicore.c linux.dev/drivers/ssb/driver_pci/pcicore.c
--- linux.old/drivers/ssb/driver_pci/pcicore.c 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/ssb/driver_pci/pcicore.c 2007-01-26 20:19:19.000000000 +0100
@@ -0,0 +1,549 @@
+/*
+ * Sonics Silicon Backplane
+ * Broadcom PCI-core driver
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/ssb/ssb.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "../ssb_private.h"
+
+static inline
+u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset)
+{
+ return ssb_read32(pc->dev, offset);
+}
+
+static inline
+void pcicore_write32(struct ssb_pcicore *pc, u16 offset, u32 value)
+{
+ ssb_write32(pc->dev, offset, value);
+}
+
+/**************************************************
+ * Code for hostmode operation.
+ **************************************************/
+
+#ifdef CONFIG_SSB_PCICORE_HOSTMODE
+
+#include <asm/paccess.h>
+/* Read the bus and catch bus exceptions. This is MIPS specific. */
+#define mips_busprobe(val, addr) get_dbe((val), (addr))
+
+/* Assume one-hot slot wiring */
+#define SSB_PCI_SLOT_MAX 16
+
+/* Global lock is OK, as we won't have more than one extpci anyway. */
+static DEFINE_SPINLOCK(cfgspace_lock);
+/* Core to access the external PCI config space. Can only have one. */
+static struct ssb_pcicore *extpci_core;
+
+u32 pci_iobase = 0x100;
+u32 pci_membase = SSB_PCI_DMA;
+
+int pcibios_plat_dev_init(struct pci_dev *d)
+{
+ struct resource *res;
+ int pos, size;
+ u32 *base;
+
+ printk("PCI: Fixing up device %s\n", pci_name(d));
+
+ /* Fix up resource bases */
+ for (pos = 0; pos < 6; pos++) {
+ res = &d->resource[pos];
+ base = ((res->flags & IORESOURCE_IO) ? &pci_iobase : &pci_membase);
+ if (res->end) {
+ size = res->end - res->start + 1;
+ if (*base & (size - 1))
+ *base = (*base + size) & ~(size - 1);
+ res->start = *base;
+ res->end = res->start + size - 1;
+ *base += size;
+ pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
+ }
+ /* Fix up PCI bridge BAR0 only */
+ if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
+ break;
+ }
+ /* Fix up interrupt lines */
+ d->irq = ssb_mips_irq(extpci_core->dev) + 2;
+ pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
+
+ return 0;
+}
+
+static void __init ssb_fixup_pcibridge(struct pci_dev *dev)
+{
+ if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
+ return;
+
+ printk("PCI: fixing up bridge\n");
+
+ /* Enable PCI bridge bus mastering and memory space */
+ pci_set_master(dev);
+ pcibios_enable_device(dev, ~0);
+
+ /* Enable PCI bridge BAR1 prefetch and burst */
+ pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge);
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return ssb_mips_irq(extpci_core->dev) + 2;
+}
+
+static u32 get_cfgspace_addr(struct ssb_pcicore *pc,
+ unsigned int bus, unsigned int dev,
+ unsigned int func, unsigned int off)
+{
+ u32 addr = 0;
+ u32 tmp;
+
+ if (unlikely(pc->cardbusmode && dev > 1))
+ goto out;
+ if (bus == 0) {//FIXME busnumber ok?
+ /* Type 0 transaction */
+ if (unlikely(dev >= SSB_PCI_SLOT_MAX))
+ goto out;
+ /* Slide the window */
+ tmp = SSB_PCICORE_SBTOPCI_CFG0;
+ tmp |= ((1 << (dev + 16)) & SSB_PCICORE_SBTOPCI1_MASK);
+ pcicore_write32(pc, SSB_PCICORE_SBTOPCI1, tmp);
+ /* Calculate the address */
+ addr = SSB_PCI_CFG;
+ addr |= ((1 << (dev + 16)) & ~SSB_PCICORE_SBTOPCI1_MASK);
+ addr |= (func << 8);
+ addr |= (off & ~3);
+ } else {
+ /* Type 1 transaction */
+ pcicore_write32(pc, SSB_PCICORE_SBTOPCI1,
+ SSB_PCICORE_SBTOPCI_CFG1);
+ /* Calculate the address */
+ addr = SSB_PCI_CFG;
+ addr |= (bus << 16);
+ addr |= (dev << 11);
+ addr |= (func << 8);
+ addr |= (off & ~3);
+ }
+out:
+ return addr;
+}
+
+static int ssb_extpci_read_config(struct ssb_pcicore *pc,
+ unsigned int bus, unsigned int dev,
+ unsigned int func, unsigned int off,
+ void *buf, int len)
+{
+ int err = -EINVAL;
+ u32 addr, val;
+ void __iomem *mmio;
+
+ assert(pc->hostmode);
+ if (unlikely(len != 1 && len != 2 && len != 4))
+ goto out;
+ addr = get_cfgspace_addr(pc, bus, dev, func, off);
+ if (unlikely(!addr))
+ goto out;
+ err = -ENOMEM;
+ mmio = ioremap_nocache(addr, len);
+ if (!mmio)
+ goto out;
+
+ if (mips_busprobe(val, (u32 *) mmio)) {
+ val = 0xffffffff;
+ goto unmap;
+ }
+
+ val = readl(mmio);
+ val >>= (8 * (off & 3));
+
+ switch (len) {
+ case 1:
+ *((u8 *)buf) = (u8)val;
+ break;
+ case 2:
+ *((u16 *)buf) = (u16)val;
+ break;
+ case 4:
+ *((u32 *)buf) = (u32)val;
+ break;
+ }
+ err = 0;
+unmap:
+ iounmap(mmio);
+out:
+ return err;
+}
+
+static int ssb_extpci_write_config(struct ssb_pcicore *pc,
+ unsigned int bus, unsigned int dev,
+ unsigned int func, unsigned int off,
+ const void *buf, int len)
+{
+ int err = -EINVAL;
+ u32 addr, val = 0;
+ void __iomem *mmio;
+
+ assert(pc->hostmode);
+ if (unlikely(len != 1 && len != 2 && len != 4))
+ goto out;
+ addr = get_cfgspace_addr(pc, bus, dev, func, off);
+ if (unlikely(!addr))
+ goto out;
+ err = -ENOMEM;
+ mmio = ioremap_nocache(addr, len);
+ if (!mmio)
+ goto out;
+
+ if (mips_busprobe(val, (u32 *) mmio)) {
+ val = 0xffffffff;
+ goto unmap;
+ }
+
+ switch (len) {
+ case 1:
+ val = readl(mmio);
+ val &= ~(0xFF << (8 * (off & 3)));
+ val |= *((const u8 *)buf) << (8 * (off & 3));
+ break;
+ case 2:
+ val = readl(mmio);
+ val &= ~(0xFFFF << (8 * (off & 3)));
+ val |= *((const u16 *)buf) << (8 * (off & 3));
+ break;
+ case 4:
+ val = *((const u32 *)buf);
+ break;
+ }
+ writel(*((const u32 *)buf), mmio);
+
+ err = 0;
+unmap:
+ iounmap(mmio);
+out:
+ return err;
+}
+
+static int ssb_pcicore_read_config(struct pci_bus *bus, unsigned int devfn,
+ int reg, int size, u32 *val)
+{
+ unsigned long flags;
+ int err;
+
+ spin_lock_irqsave(&cfgspace_lock, flags);
+ err = ssb_extpci_read_config(extpci_core, bus->number, PCI_SLOT(devfn),
+ PCI_FUNC(devfn), reg, val, size);
+ spin_unlock_irqrestore(&cfgspace_lock, flags);
+
+ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+}
+
+static int ssb_pcicore_write_config(struct pci_bus *bus, unsigned int devfn,
+ int reg, int size, u32 val)
+{
+ unsigned long flags;
+ int err;
+
+ spin_lock_irqsave(&cfgspace_lock, flags);
+ err = ssb_extpci_write_config(extpci_core, bus->number, PCI_SLOT(devfn),
+ PCI_FUNC(devfn), reg, &val, size);
+ spin_unlock_irqrestore(&cfgspace_lock, flags);
+
+ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops ssb_pcicore_pciops = {
+ .read = ssb_pcicore_read_config,
+ .write = ssb_pcicore_write_config,
+};
+
+static struct resource ssb_pcicore_mem_resource = {
+ .name = "SSB PCIcore external memory",
+ .start = SSB_PCI_DMA,
+ .end = (u32)SSB_PCI_DMA + (u32)SSB_PCI_DMA_SZ - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource ssb_pcicore_io_resource = {
+ .name = "SSB PCIcore external I/O",
+ .start = 0x100,
+ .end = 0x7FF,
+ .flags = IORESOURCE_IO,
+};
+
+static struct pci_controller ssb_pcicore_controller = {
+ .pci_ops = &ssb_pcicore_pciops,
+ .io_resource = &ssb_pcicore_io_resource,
+ .mem_resource = &ssb_pcicore_mem_resource,
+ .mem_offset = 0x24000000,
+};
+
+static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
+{
+ u32 val;
+
+ assert(!extpci_core);
+ extpci_core = pc;
+
+ ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n");
+ /* Reset devices on the external PCI bus */
+ val = SSB_PCICORE_CTL_RST_OE;
+ val |= SSB_PCICORE_CTL_CLK_OE;
+ pcicore_write32(pc, SSB_PCICORE_CTL, val);
+ val |= SSB_PCICORE_CTL_CLK; /* Clock on */
+ pcicore_write32(pc, SSB_PCICORE_CTL, val);
+ udelay(150);
+ val |= SSB_PCICORE_CTL_RST; /* Deassert RST# */
+ pcicore_write32(pc, SSB_PCICORE_CTL, val);
+ udelay(1);
+
+ //TODO cardbus mode
+
+ /* 64MB I/O window */
+ pcicore_write32(pc, SSB_PCICORE_SBTOPCI0,
+ SSB_PCICORE_SBTOPCI_IO);
+ /* 64MB config space */
+ pcicore_write32(pc, SSB_PCICORE_SBTOPCI1,
+ SSB_PCICORE_SBTOPCI_CFG0);
+ /* 1GB memory window */
+ pcicore_write32(pc, SSB_PCICORE_SBTOPCI2,
+ SSB_PCICORE_SBTOPCI_MEM | SSB_PCI_DMA);
+
+ /* Enable PCI bridge BAR0 prefetch and burst */
+ val = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ ssb_extpci_write_config(pc, 0, 0, 0, PCI_COMMAND, &val, 4);
+
+ /* Enable PCI interrupts */
+ pcicore_write32(pc, SSB_PCICORE_IMASK,
+ SSB_PCICORE_IMASK_INTA);
+
+ /* Ok, ready to run, register it to the system.
+ * The following needs change, if we want to port hostmode
+ * to non-MIPS platform. */
+ set_io_port_base((unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000));
+ register_pci_controller(&ssb_pcicore_controller);
+}
+
+static int pcicore_is_in_hostmode(struct ssb_pcicore *pc)
+{
+ struct ssb_bus *bus = pc->dev->bus;
+ u16 chipid_top;
+ u32 tmp;
+
+ chipid_top = (bus->chip_id & 0xFF00);
+ if (chipid_top != 0x4700 &&
+ chipid_top != 0x5300)
+ return 0;
+
+ if (bus->sprom.r1.boardflags_lo & SSB_PCICORE_BFL_NOPCI)
+ return 0;
+
+ /* The 200-pin BCM4712 package does not bond out PCI. Even when
+ * PCI is bonded out, some boards may leave the pins floating. */
+ if (bus->chip_id == 0x4712) {
+ if (bus->chip_package == SSB_CHIPPACK_BCM4712S)
+ return 0;
+ if (bus->chip_package == SSB_CHIPPACK_BCM4712M)
+ return 0;
+ }
+ if (bus->chip_id == 0x5350)
+ return 0;
+
+ return !mips_busprobe(tmp, (u32 *) (bus->mmio + (pc->dev->core_index * SSB_CORE_SIZE)));
+}
+#endif /* CONFIG_SSB_PCICORE_HOSTMODE */
+
+
+/**************************************************
+ * Generic and Clientmode operation code.
+ **************************************************/
+
+static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
+{
+ /* Disable PCI interrupts. */
+ ssb_write32(pc->dev, SSB_INTVEC, 0);
+}
+
+void ssb_pcicore_init(struct ssb_pcicore *pc)
+{
+ struct ssb_device *dev = pc->dev;
+ struct ssb_bus *bus;
+
+ if (!dev)
+ return;
+ bus = dev->bus;
+ if (!ssb_device_is_enabled(dev))
+ ssb_device_enable(dev, 0);
+
+#ifdef CONFIG_SSB_PCICORE_HOSTMODE
+ pc->hostmode = pcicore_is_in_hostmode(pc);
+ if (pc->hostmode)
+ ssb_pcicore_init_hostmode(pc);
+#endif /* CONFIG_SSB_PCICORE_HOSTMODE */
+ if (!pc->hostmode)
+ ssb_pcicore_init_clientmode(pc);
+}
+
+static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address)
+{
+ pcicore_write32(pc, 0x130, address);
+ return pcicore_read32(pc, 0x134);
+}
+
+static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data)
+{
+ pcicore_write32(pc, 0x130, address);
+ pcicore_write32(pc, 0x134, data);
+}
+
+static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
+ u8 address, u16 data)
+{
+ const u16 mdio_control = 0x128;
+ const u16 mdio_data = 0x12C;
+ u32 v;
+ int i;
+
+ v = 0x80; /* Enable Preamble Sequence */
+ v |= 0x2; /* MDIO Clock Divisor */
+ pcicore_write32(pc, mdio_control, v);
+
+ v = (1 << 30); /* Start of Transaction */
+ v |= (1 << 28); /* Write Transaction */
+ v |= (1 << 17); /* Turnaround */
+ v |= (u32)device << 22;
+ v |= (u32)address << 18;
+ v |= data;
+ pcicore_write32(pc, mdio_data, v);
+ udelay(10);
+ for (i = 0; i < 10; i++) {
+ v = pcicore_read32(pc, mdio_control);
+ if (v & 0x100 /* Trans complete */)
+ break;
+ msleep(1);
+ }
+ pcicore_write32(pc, mdio_control, 0);
+}
+
+static void ssb_broadcast_value(struct ssb_device *dev,
+ u32 address, u32 data)
+{
+ /* This is used for both, PCI and ChipCommon core, so be careful. */
+ BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
+ BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
+
+ ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address);
+ ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */
+ ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data);
+ ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */
+}
+
+static void ssb_commit_settings(struct ssb_bus *bus)
+{
+ struct ssb_device *dev;
+
+ dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
+ assert(dev);
+ /* This forces an update of the cached registers. */
+ ssb_broadcast_value(dev, 0xFD8, 0);
+}
+
+int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
+ struct ssb_device *dev)
+{
+ struct ssb_device *pdev = pc->dev;
+ struct ssb_bus *bus;
+ int err = 0;
+ u32 tmp;
+
+ might_sleep();
+
+ if (!pdev)
+ goto out;
+ bus = pdev->bus;
+
+ /* Enable interrupts for this device. */
+ if (bus->host_pci &&
+ ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) {
+ u32 coremask;
+
+ /* Calculate the "coremask" for the device. */
+ coremask = (1 << dev->core_index);
+
+ err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp);
+ if (err)
+ goto out;
+ tmp |= coremask << 8;
+ err = pci_write_config_dword(bus->host_pci, SSB_PCI_IRQMASK, tmp);
+ if (err)
+ goto out;
+ } else {
+ u32 intvec;
+
+ intvec = ssb_read32(pdev, SSB_INTVEC);
+ tmp = ssb_read32(dev, SSB_TPSFLAG);
+ tmp &= SSB_TPSFLAG_BPFLAG;
+ intvec |= tmp;
+ ssb_write32(pdev, SSB_INTVEC, intvec);
+ }
+
+ /* Setup PCIcore operation. */
+ if (pc->setup_done)
+ goto out;
+ if (pdev->id.coreid == SSB_DEV_PCI) {
+ tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
+ tmp |= SSB_PCICORE_SBTOPCI_PREF;
+ tmp |= SSB_PCICORE_SBTOPCI_BURST;
+ pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
+
+ if (pdev->id.revision < 5) {
+ tmp = ssb_read32(pdev, SSB_IMCFGLO);
+ tmp &= ~SSB_IMCFGLO_SERTO;
+ tmp |= 2;
+ tmp &= ~SSB_IMCFGLO_REQTO;
+ tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT;
+ ssb_write32(pdev, SSB_IMCFGLO, tmp);
+ ssb_commit_settings(bus);
+ } else if (pdev->id.revision >= 11) {
+ tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
+ tmp |= SSB_PCICORE_SBTOPCI_MRM;
+ pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
+ }
+ } else {
+ assert(pdev->id.coreid == SSB_DEV_PCIE);
+ //TODO: Better make defines for all these magic PCIE values.
+ if ((pdev->id.revision == 0) || (pdev->id.revision == 1)) {
+ /* TLP Workaround register. */
+ tmp = ssb_pcie_read(pc, 0x4);
+ tmp |= 0x8;
+ ssb_pcie_write(pc, 0x4, tmp);
+ }
+ if (pdev->id.revision == 0) {
+ const u8 serdes_rx_device = 0x1F;
+
+ ssb_pcie_mdio_write(pc, serdes_rx_device,
+ 2 /* Timer */, 0x8128);
+ ssb_pcie_mdio_write(pc, serdes_rx_device,
+ 6 /* CDR */, 0x0100);
+ ssb_pcie_mdio_write(pc, serdes_rx_device,
+ 7 /* CDR BW */, 0x1466);
+ } else if (pdev->id.revision == 1) {
+ /* DLLP Link Control register. */
+ tmp = ssb_pcie_read(pc, 0x100);
+ tmp |= 0x40;
+ ssb_pcie_write(pc, 0x100, tmp);
+ }
+ }
+ pc->setup_done = 1;
+out:
+ return err;
+}
+EXPORT_SYMBOL(ssb_pcicore_dev_irqvecs_enable);
diff -urN linux.old/drivers/ssb/Kconfig linux.dev/drivers/ssb/Kconfig
--- linux.old/drivers/ssb/Kconfig 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/ssb/Kconfig 2007-01-26 00:44:13.000000000 +0100
@@ -0,0 +1,93 @@
+menu "Sonics Silicon Backplane"
+
+config SSB
+ tristate "Sonics Silicon Backplane support"
+ depends on EXPERIMENTAL
+ help
+ Support for the Sonics Silicon Backplane bus
+
+ The module will be called ssb
+
+ If unsure, say M
+
+config SSB_PCIHOST
+ bool "Support for SSB on PCI-bus host"
+ depends on SSB && PCI
+ default y
+ help
+ Support for a Sonics Silicon Backplane on top
+ of a PCI device.
+
+ If unsure, say Y
+
+config SSB_PCMCIAHOST
+ bool "Support for SSB on PCMCIA-bus host"
+ depends on SSB && PCMCIA
+ help
+ Support for a Sonics Silicon Backplane on top
+ of a PCMCIA device.
+
+ If unsure, say N
+
+config SSB_SILENT
+ bool "No SSB kernel messages"
+ depends on SSB
+ help
+ This option turns off all Sonics Silicon Backplane printks.
+ Note that you won't be able to identify problems, once
+ messages are turned off.
+ This might only be desired for production kernels on
+ embedded devices to reduce the kernel size.
+
+ Say N
+
+config SSB_DEBUG
+ bool "SSB debugging"
+ depends on SSB && !SSB_SILENT
+ help
+ This turns on additional runtime checks and debugging
+ messages. Turn this on for SSB troubleshooting.
+
+ If unsure, say N
+
+config SSB_SERIAL
+ bool
+ depends on SSB
+ # ChipCommon and ExtIf serial support routines.
+
+config SSB_DRIVER_PCICORE
+ bool "SSB PCI core driver"
+ depends on SSB && SSB_PCIHOST
+ default y
+ help
+ Driver for the Sonics Silicon Backplane attached
+ Broadcom PCI core.
+
+ If unsure, say Y
+
+config SSB_PCICORE_HOSTMODE
+ bool "Hostmode support for SSB PCI core"
+ depends on SSB_DRIVER_PCICORE && SSB_DRIVER_MIPS
+ help
+ PCIcore hostmode operation (external PCI bus).
+
+config SSB_DRIVER_MIPS
+ bool "SSB Broadcom MIPS core driver"
+ depends on SSB && MIPS
+ select SSB_SERIAL
+ help
+ Driver for the Sonics Silicon Backplane attached
+ Broadcom MIPS core.
+
+ If unsure, say N
+
+config SSB_DRIVER_EXTIF
+ bool "SSB Broadcom EXTIF core driver"
+ depends on SSB_DRIVER_MIPS
+ help
+ Driver for the Sonics Silicon Backplane attached
+ Broadcom EXTIF core.
+
+ If unsure, say N
+
+endmenu
diff -urN linux.old/drivers/ssb/Makefile linux.dev/drivers/ssb/Makefile
--- linux.old/drivers/ssb/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/ssb/Makefile 2007-01-26 00:44:13.000000000 +0100
@@ -0,0 +1,14 @@
+ssb-driver-chipcommon-y := driver_chipcommon/chipcommon.o
+ssb-driver-mips-$(CONFIG_SSB_DRIVER_MIPS) := driver_mips/mips.o
+ssb-driver-pci-$(CONFIG_SSB_DRIVER_PCICORE) := driver_pci/pcicore.o
+
+ssb-$(CONFIG_SSB_PCIHOST) += pci.o
+ssb-$(CONFIG_SSB_PCMCIAHOST) += pcmcia.o
+
+obj-$(CONFIG_SSB) += ssb.o
+
+ssb-objs := core.o scan.o \
+ $(ssb-y) $(ssb-m) \
+ $(ssb-driver-chipcommon-y) \
+ $(ssb-driver-mips-y) \
+ $(ssb-driver-pci-y)
diff -urN linux.old/drivers/ssb/pci.c linux.dev/drivers/ssb/pci.c
--- linux.old/drivers/ssb/pci.c 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/ssb/pci.c 2007-01-26 00:44:13.000000000 +0100
@@ -0,0 +1,480 @@
+/*
+ * Sonics Silicon Backplane PCI-Hostbus related functions.
+ *
+ * Copyright (C) 2005-2006 Michael Buesch <mb@bu3sch.de>
+ * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
+ * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
+ * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
+ * Copyright (C) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
+ *
+ * Derived from the Broadcom 4400 device driver.
+ * Copyright (C) 2002 David S. Miller (davem@redhat.com)
+ * Fixed by Pekka Pietikainen (pp@ee.oulu.fi)
+ * Copyright (C) 2006 Broadcom Corporation.
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_regs.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "ssb_private.h"
+
+
+int ssb_pci_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
+{
+ int err;
+ int attempts = 0;
+ u32 cur_core;
+
+ while (1) {
+ err = pci_write_config_dword(bus->host_pci, SSB_BAR0_WIN,
+ (coreidx * SSB_CORE_SIZE)
+ + SSB_ENUM_BASE);
+ if (err)
+ goto error;
+ err = pci_read_config_dword(bus->host_pci, SSB_BAR0_WIN,
+ &cur_core);
+ if (err)
+ goto error;
+ cur_core = (cur_core - SSB_ENUM_BASE)
+ / SSB_CORE_SIZE;
+ if (cur_core == coreidx)
+ break;
+
+ if (attempts++ > SSB_BAR0_MAX_RETRIES)
+ goto error;
+ udelay(10);
+ }
+ return 0;
+error:
+ ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
+ return -ENODEV;
+}
+
+int ssb_pci_switch_core(struct ssb_bus *bus,
+ struct ssb_device *dev)
+{
+ int err;
+ unsigned long flags;
+
+ ssb_dprintk(KERN_INFO PFX
+ "Switching to %s core, index %d\n",
+ ssb_core_name(dev->id.coreid),
+ dev->core_index);
+
+ spin_lock_irqsave(&bus->bar_lock, flags);
+ err = ssb_pci_switch_coreidx(bus, dev->core_index);
+ if (!err)
+ bus->mapped_device = dev;
+ spin_unlock_irqrestore(&bus->bar_lock, flags);
+
+ return err;
+}
+
+int ssb_pci_xtal(struct ssb_bus *bus, u32 what, int turn_on)
+{
+ int err;
+ u32 in, out, outenable;
+ u16 pci_status;
+
+ if (bus->bustype != SSB_BUSTYPE_PCI)
+ return 0;
+
+ err = pci_read_config_dword(bus->host_pci, SSB_GPIO_IN, &in);
+ if (err)
+ goto err_pci;
+ err = pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT, &out);
+ if (err)
+ goto err_pci;
+ err = pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT_ENABLE, &outenable);
+ if (err)
+ goto err_pci;
+
+ outenable |= what;
+
+ if (turn_on) {
+ /* Avoid glitching the clock if GPRS is already using it.
+ * We can't actually read the state of the PLLPD so we infer it
+ * by the value of XTAL_PU which *is* readable via gpioin.
+ */
+ if (!(in & SSB_GPIO_XTAL)) {
+ if (what & SSB_GPIO_XTAL) {
+ /* Turn the crystal on */
+ out |= SSB_GPIO_XTAL;
+ if (what & SSB_GPIO_PLL)
+ out |= SSB_GPIO_PLL;
+ err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT, out);
+ if (err)
+ goto err_pci;
+ err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT_ENABLE,
+ outenable);
+ if (err)
+ goto err_pci;
+ msleep(1);
+ }
+ if (what & SSB_GPIO_PLL) {
+ /* Turn the PLL on */
+ out &= ~SSB_GPIO_PLL;
+ err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT, out);
+ if (err)
+ goto err_pci;
+ msleep(2);
+ }
+ }
+
+ err = pci_read_config_word(bus->host_pci, PCI_STATUS, &pci_status);
+ if (err)
+ goto err_pci;
+ pci_status &= ~PCI_STATUS_SIG_TARGET_ABORT;
+ err = pci_write_config_word(bus->host_pci, PCI_STATUS, pci_status);
+ if (err)
+ goto err_pci;
+ } else {
+ if (what & SSB_GPIO_XTAL) {
+ /* Turn the crystal off */
+ out &= ~SSB_GPIO_XTAL;
+ }
+ if (what & SSB_GPIO_PLL) {
+ /* Turn the PLL off */
+ out |= SSB_GPIO_PLL;
+ }
+ err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT, out);
+ if (err)
+ goto err_pci;
+ err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT_ENABLE, outenable);
+ if (err)
+ goto err_pci;
+ }
+
+out:
+ return err;
+
+err_pci:
+ printk(KERN_ERR PFX "Error: ssb_pci_xtal() could not access PCI config space!\n");
+ err = -EBUSY;
+ goto out;
+}
+
+#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16))
+#define SPEX(_outvar, _offset, _mask, _shift) \
+ out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
+
+static inline u8 ssb_crc8(u8 crc, u8 data)
+{
+ /* Polynomial: x^8 + x^7 + x^6 + x^4 + x^2 + 1 */
+ static const u8 t[] = {
+ 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
+ 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
+ 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
+ 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
+ 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
+ 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
+ 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
+ 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
+ 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
+ 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
+ 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
+ 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
+ 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
+ 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
+ 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
+ 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
+ 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
+ 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
+ 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
+ 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
+ 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
+ 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
+ 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
+ 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
+ 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
+ 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
+ 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
+ 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
+ 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
+ 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
+ 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
+ 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F,
+ };
+ return t[crc ^ data];
+}
+
+static u8 ssb_sprom_crc(const u16 *sprom)
+{
+ int word;
+ u8 crc = 0xFF;
+
+ for (word = 0; word < SSB_SPROMSIZE_WORDS - 1; word++) {
+ crc = ssb_crc8(crc, sprom[word] & 0x00FF);
+ crc = ssb_crc8(crc, (sprom[word] & 0xFF00) >> 8);
+ }
+ crc = ssb_crc8(crc, sprom[SPOFF(SSB_SPROM_REVISION)] & 0x00FF);
+ crc ^= 0xFF;
+
+ return crc;
+}
+
+static int sprom_check_crc(const u16 *sprom)
+{
+ u8 crc;
+ u8 expected_crc;
+ u16 tmp;
+
+ crc = ssb_sprom_crc(sprom);
+ tmp = sprom[SPOFF(SSB_SPROM_REVISION)] & SSB_SPROM_REVISION_CRC;
+ expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT;
+ if (crc != expected_crc)
+ return -EPROTO;
+
+ return 0;
+}
+
+static void sprom_do_read(struct ssb_bus *bus, u16 *sprom)
+{
+ int i;
+
+ for (i = 0; i < SSB_SPROMSIZE_WORDS; i++)
+ sprom[i] = readw(bus->mmio + SSB_SPROM_BASE + (i * 2));
+}
+
+static void sprom_extract_r1(struct ssb_sprom_r1 *out, const u16 *in)
+{
+ int i;
+ u16 v;
+
+ SPEX(pci_spid, SSB_SPROM1_SPID, 0xFFFF, 0);
+ SPEX(pci_svid, SSB_SPROM1_SVID, 0xFFFF, 0);
+ SPEX(pci_pid, SSB_SPROM1_PID, 0xFFFF, 0);
+ for (i = 0; i < 3; i++) {
+ v = in[SPOFF(SSB_SPROM1_IL0MAC) + i];
+ *(((u16 *)out->il0mac) + i) = cpu_to_be16(v);
+ }
+ for (i = 0; i < 3; i++) {
+ v = in[SPOFF(SSB_SPROM1_ET0MAC) + i];
+ *(((u16 *)out->et0mac) + i) = cpu_to_be16(v);
+ }
+ for (i = 0; i < 3; i++) {
+ v = in[SPOFF(SSB_SPROM1_ET1MAC) + i];
+ *(((u16 *)out->et1mac) + i) = cpu_to_be16(v);
+ }
+ SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
+ SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
+ SSB_SPROM1_ETHPHY_ET1A_SHIFT);
+ SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
+ SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
+ SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
+ SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
+ SSB_SPROM1_BINF_CCODE_SHIFT);
+ SPEX(antenna_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
+ SSB_SPROM1_BINF_ANTA_SHIFT);
+ SPEX(antenna_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
+ SSB_SPROM1_BINF_ANTBG_SHIFT);
+ SPEX(pa0b0, SSB_SPROM1_PA0B0, 0xFFFF, 0);
+ SPEX(pa0b1, SSB_SPROM1_PA0B1, 0xFFFF, 0);
+ SPEX(pa0b2, SSB_SPROM1_PA0B2, 0xFFFF, 0);
+ SPEX(pa1b0, SSB_SPROM1_PA1B0, 0xFFFF, 0);
+ SPEX(pa1b1, SSB_SPROM1_PA1B1, 0xFFFF, 0);
+ SPEX(pa1b2, SSB_SPROM1_PA1B2, 0xFFFF, 0);
+ SPEX(gpio0, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P0, 0);
+ SPEX(gpio1, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P1,
+ SSB_SPROM1_GPIOA_P1_SHIFT);
+ SPEX(gpio2, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P2, 0);
+ SPEX(gpio3, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P3,
+ SSB_SPROM1_GPIOB_P3_SHIFT);
+ SPEX(maxpwr_a, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_A, 0);
+ SPEX(maxpwr_bg, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_BG,
+ SSB_SPROM1_MAXPWR_BG_SHIFT);
+ SPEX(itssi_a, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_A, 0);
+ SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG,
+ SSB_SPROM1_ITSSI_BG_SHIFT);
+ SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
+ SPEX(antenna_gain_a, SSB_SPROM1_AGAIN, SSB_SPROM1_AGAIN_A, 0);
+ SPEX(antenna_gain_bg, SSB_SPROM1_AGAIN, SSB_SPROM1_AGAIN_BG,
+ SSB_SPROM1_AGAIN_BG_SHIFT);
+ for (i = 0; i < 4; i++) {
+ v = in[SPOFF(SSB_SPROM1_OEM) + i];
+ *(((u16 *)out->oem) + i) = cpu_to_le16(v);
+ }
+}
+
+static void sprom_extract_r2(struct ssb_sprom_r2 *out, const u16 *in)
+{
+ int i;
+ u16 v;
+
+ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
+ SPEX(maxpwr_a_hi, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
+ SPEX(maxpwr_a_lo, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
+ SSB_SPROM2_MAXP_A_LO_SHIFT);
+ SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
+ SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
+ SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
+ SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
+ SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
+ SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
+ SPEX(ofdm_pwr_off, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
+ for (i = 0; i < 4; i++) {
+ v = in[SPOFF(SSB_SPROM2_CCODE) + i];
+ *(((u16 *)out->country_str) + i) = cpu_to_le16(v);
+ }
+}
+
+static void sprom_extract_r3(struct ssb_sprom_r3 *out, const u16 *in)
+{
+ out->ofdmapo = (in[SPOFF(SSB_SPROM3_OFDMAPO) + 0] & 0xFF00) >> 8;
+ out->ofdmapo |= (in[SPOFF(SSB_SPROM3_OFDMAPO) + 0] & 0x00FF) << 8;
+ out->ofdmapo <<= 16;
+ out->ofdmapo |= (in[SPOFF(SSB_SPROM3_OFDMAPO) + 1] & 0xFF00) >> 8;
+ out->ofdmapo |= (in[SPOFF(SSB_SPROM3_OFDMAPO) + 1] & 0x00FF) << 8;
+
+ out->ofdmalpo = (in[SPOFF(SSB_SPROM3_OFDMALPO) + 0] & 0xFF00) >> 8;
+ out->ofdmalpo |= (in[SPOFF(SSB_SPROM3_OFDMALPO) + 0] & 0x00FF) << 8;
+ out->ofdmalpo <<= 16;
+ out->ofdmalpo |= (in[SPOFF(SSB_SPROM3_OFDMALPO) + 1] & 0xFF00) >> 8;
+ out->ofdmalpo |= (in[SPOFF(SSB_SPROM3_OFDMALPO) + 1] & 0x00FF) << 8;
+
+ out->ofdmahpo = (in[SPOFF(SSB_SPROM3_OFDMAHPO) + 0] & 0xFF00) >> 8;
+ out->ofdmahpo |= (in[SPOFF(SSB_SPROM3_OFDMAHPO) + 0] & 0x00FF) << 8;
+ out->ofdmahpo <<= 16;
+ out->ofdmahpo |= (in[SPOFF(SSB_SPROM3_OFDMAHPO) + 1] & 0xFF00) >> 8;
+ out->ofdmahpo |= (in[SPOFF(SSB_SPROM3_OFDMAHPO) + 1] & 0x00FF) << 8;
+
+ SPEX(gpioldc_on_cnt, SSB_SPROM3_GPIOLDC, SSB_SPROM3_GPIOLDC_ON,
+ SSB_SPROM3_GPIOLDC_ON_SHIFT);
+ SPEX(gpioldc_off_cnt, SSB_SPROM3_GPIOLDC, SSB_SPROM3_GPIOLDC_OFF,
+ SSB_SPROM3_GPIOLDC_OFF_SHIFT);
+ SPEX(cckpo_1M, SSB_SPROM3_CCKPO, SSB_SPROM3_CCKPO_1M, 0);
+ SPEX(cckpo_2M, SSB_SPROM3_CCKPO, SSB_SPROM3_CCKPO_2M,
+ SSB_SPROM3_CCKPO_2M_SHIFT);
+ SPEX(cckpo_55M, SSB_SPROM3_CCKPO, SSB_SPROM3_CCKPO_55M,
+ SSB_SPROM3_CCKPO_55M_SHIFT);
+ SPEX(cckpo_11M, SSB_SPROM3_CCKPO, SSB_SPROM3_CCKPO_11M,
+ SSB_SPROM3_CCKPO_11M_SHIFT);
+
+ out->ofdmgpo = (in[SPOFF(SSB_SPROM3_OFDMGPO) + 0] & 0xFF00) >> 8;
+ out->ofdmgpo |= (in[SPOFF(SSB_SPROM3_OFDMGPO) + 0] & 0x00FF) << 8;
+ out->ofdmgpo <<= 16;
+ out->ofdmgpo |= (in[SPOFF(SSB_SPROM3_OFDMGPO) + 1] & 0xFF00) >> 8;
+ out->ofdmgpo |= (in[SPOFF(SSB_SPROM3_OFDMGPO) + 1] & 0x00FF) << 8;
+}
+
+static int sprom_extract(struct ssb_sprom *out, const u16 *in)
+{
+ memset(out, 0, sizeof(*out));
+
+ SPEX(revision, SSB_SPROM_REVISION, SSB_SPROM_REVISION_REV, 0);
+ SPEX(crc, SSB_SPROM_REVISION, SSB_SPROM_REVISION_CRC,
+ SSB_SPROM_REVISION_CRC_SHIFT);
+
+ if (out->revision == 0)
+ goto unsupported;
+ if (out->revision >= 1 && out->revision <= 3)
+ sprom_extract_r1(&out->r1, in);
+ if (out->revision >= 2 && out->revision <= 3)
+ sprom_extract_r2(&out->r2, in);
+ if (out->revision == 3)
+ sprom_extract_r3(&out->r3, in);
+ if (out->revision >= 4)
+ goto unsupported;
+
+ return 0;
+unsupported:
+ ssb_printk(KERN_WARNING PFX "Unsupported SPROM revision %d "
+ "detected. Will extract v1\n", out->revision);
+ sprom_extract_r1(&out->r1, in);
+ return 0;
+}
+
+int ssb_pci_sprom_get(struct ssb_bus *bus)
+{
+ int err = -ENOMEM;
+ u16 *buf;
+
+ assert(bus->bustype == SSB_BUSTYPE_PCI);
+
+ buf = kcalloc(SSB_SPROMSIZE_WORDS, sizeof(u16), GFP_KERNEL);
+ if (!buf)
+ goto out;
+ sprom_do_read(bus, buf);
+ err = sprom_check_crc(buf);
+ if (err) {
+ ssb_printk(KERN_WARNING PFX
+ "WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
+ }
+ err = sprom_extract(&bus->sprom, buf);
+
+ kfree(buf);
+out:
+ return err;
+}
+
+void ssb_pci_get_boardtype(struct ssb_bus *bus)
+{
+ pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_VENDOR_ID,
+ &bus->board_vendor);
+ pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_ID,
+ &bus->board_type);
+ pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
+ &bus->board_rev);
+}
+
+static u16 ssb_pci_read16(struct ssb_device *dev, u16 offset)
+{
+ struct ssb_bus *bus = dev->bus;
+
+ if (unlikely(bus->mapped_device != dev)) {
+ if (unlikely(ssb_pci_switch_core(bus, dev)))
+ return 0xFFFF;
+ }
+ return readw(bus->mmio + offset);
+}
+
+static u32 ssb_pci_read32(struct ssb_device *dev, u16 offset)
+{
+ struct ssb_bus *bus = dev->bus;
+
+ if (unlikely(bus->mapped_device != dev)) {
+ if (unlikely(ssb_pci_switch_core(bus, dev)))
+ return 0xFFFFFFFF;
+ }
+ return readl(bus->mmio + offset);
+}
+
+static void ssb_pci_write16(struct ssb_device *dev, u16 offset, u16 value)
+{
+ struct ssb_bus *bus = dev->bus;
+
+ if (unlikely(bus->mapped_device != dev)) {
+ if (unlikely(ssb_pci_switch_core(bus, dev)))
+ return;
+ }
+ writew(value, bus->mmio + offset);
+}
+
+static void ssb_pci_write32(struct ssb_device *dev, u16 offset, u32 value)
+{
+ struct ssb_bus *bus = dev->bus;
+
+ if (unlikely(bus->mapped_device != dev)) {
+ if (unlikely(ssb_pci_switch_core(bus, dev)))
+ return;
+ }
+ writel(value, bus->mmio + offset);
+}
+
+const struct ssb_bus_ops ssb_pci_ops = {
+ .read16 = ssb_pci_read16,
+ .read32 = ssb_pci_read32,
+ .write16 = ssb_pci_write16,
+ .write32 = ssb_pci_write32,
+};
+
+int ssb_pci_init(struct ssb_bus *bus)
+{
+ if (bus->bustype != SSB_BUSTYPE_PCI)
+ return 0;
+ return ssb_pci_sprom_get(bus);
+}
diff -urN linux.old/drivers/ssb/pcmcia.c linux.dev/drivers/ssb/pcmcia.c
--- linux.old/drivers/ssb/pcmcia.c 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/ssb/pcmcia.c 2007-01-26 00:44:13.000000000 +0100
@@ -0,0 +1,256 @@
+/*
+ * Sonics Silicon Backplane
+ * PCMCIA-Hostbus related functions
+ *
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2007 Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/ssb/ssb.h>
+#include <linux/delay.h>
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ciscode.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/cisreg.h>
+
+#include "ssb_private.h"
+
+
+int ssb_pcmcia_switch_coreidx(struct ssb_bus *bus,
+ u8 coreidx)
+{
+ struct pcmcia_device *pdev = bus->host_pcmcia;
+ int err;
+ int attempts = 0;
+ u32 cur_core;
+ conf_reg_t reg;
+ u32 addr;
+ u32 read_addr;
+
+ addr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
+ while (1) {
+ reg.Action = CS_WRITE;
+ reg.Offset = 0x2E;
+ reg.Value = (addr & 0x0000F000) >> 12;
+ err = pcmcia_access_configuration_register(pdev, &reg);
+ if (err != CS_SUCCESS)
+ goto error;
+ reg.Offset = 0x30;
+ reg.Value = (addr & 0x00FF0000) >> 16;
+ err = pcmcia_access_configuration_register(pdev, &reg);
+ if (err != CS_SUCCESS)
+ goto error;
+ reg.Offset = 0x32;
+ reg.Value = (addr & 0xFF000000) >> 24;
+ err = pcmcia_access_configuration_register(pdev, &reg);
+ if (err != CS_SUCCESS)
+ goto error;
+
+ read_addr = 0;
+
+ reg.Action = CS_READ;
+ reg.Offset = 0x2E;
+ err = pcmcia_access_configuration_register(pdev, &reg);
+ if (err != CS_SUCCESS)
+ goto error;
+ read_addr |= (reg.Value & 0xF) << 12;
+ reg.Offset = 0x30;
+ err = pcmcia_access_configuration_register(pdev, &reg);
+ if (err != CS_SUCCESS)
+ goto error;
+ read_addr |= reg.Value << 16;
+ reg.Offset = 0x32;
+ err = pcmcia_access_configuration_register(pdev, &reg);
+ if (err != CS_SUCCESS)
+ goto error;
+ read_addr |= reg.Value << 24;
+
+ cur_core = (read_addr - SSB_ENUM_BASE) / SSB_CORE_SIZE;
+ if (cur_core == coreidx)
+ break;
+
+ if (attempts++ > SSB_BAR0_MAX_RETRIES)
+ goto error;
+ udelay(10);
+ }
+
+ return 0;
+error:
+ ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
+ return -ENODEV;
+}
+
+int ssb_pcmcia_switch_core(struct ssb_bus *bus,
+ struct ssb_device *dev)
+{
+ int err;
+ unsigned long flags;
+
+ ssb_dprintk(KERN_INFO PFX
+ "Switching to %s core, index %d\n",
+ ssb_core_name(dev->id.coreid),
+ dev->core_index);
+
+ spin_lock_irqsave(&bus->bar_lock, flags);
+ err = ssb_pcmcia_switch_coreidx(bus, dev->core_index);
+ if (!err)
+ bus->mapped_device = dev;
+ spin_unlock_irqrestore(&bus->bar_lock, flags);
+
+ return err;
+}
+
+int ssb_pcmcia_switch_segment(struct ssb_bus *bus, u8 seg)
+{
+ int attempts = 0;
+ unsigned long flags;
+ conf_reg_t reg;
+ int res, err = 0;
+
+ assert(seg == 0 || seg == 1);
+ reg.Offset = 0x34;
+ reg.Function = 0;
+ spin_lock_irqsave(&bus->bar_lock, flags);
+ while (1) {
+ reg.Action = CS_WRITE;
+ reg.Value = seg;
+ res = pcmcia_access_configuration_register(bus->host_pcmcia, &reg);
+ if (unlikely(res != CS_SUCCESS))
+ goto error;
+ reg.Value = 0xFF;
+ reg.Action = CS_READ;
+ res = pcmcia_access_configuration_register(bus->host_pcmcia, &reg);
+ if (unlikely(res != CS_SUCCESS))
+ goto error;
+
+ if (reg.Value == seg)
+ break;
+
+ if (unlikely(attempts++ > SSB_BAR0_MAX_RETRIES))
+ goto error;
+ udelay(10);
+ }
+ bus->mapped_pcmcia_seg = seg;
+out_unlock:
+ spin_unlock_irqrestore(&bus->bar_lock, flags);
+ return err;
+error:
+ ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n");
+ err = -ENODEV;
+ goto out_unlock;
+}
+
+static inline int do_select_core(struct ssb_bus *bus,
+ struct ssb_device *dev,
+ u16 *offset)
+{
+ int err;
+ u8 need_seg = (*offset >= 0x800) ? 1 : 0;
+
+ if (unlikely(dev != bus->mapped_device)) {
+ err = ssb_pcmcia_switch_core(bus, dev);
+ if (unlikely(err))
+ return err;
+ }
+ if (unlikely(need_seg != bus->mapped_pcmcia_seg)) {
+ err = ssb_pcmcia_switch_segment(bus, need_seg);
+ if (unlikely(err))
+ return err;
+ }
+ if (need_seg == 1)
+ *offset -= 0x800;
+
+ return 0;
+}
+
+static u16 ssb_pcmcia_read16(struct ssb_device *dev, u16 offset)
+{
+ struct ssb_bus *bus = dev->bus;
+ u16 x;
+
+ if (unlikely(do_select_core(bus, dev, &offset)))
+ return 0xFFFF;
+ x = readw(bus->mmio + offset);
+//printk("R16 0x%04X, 0x%04X\n", offset, x);
+ return x;
+}
+
+static u32 ssb_pcmcia_read32(struct ssb_device *dev, u16 offset)
+{
+ struct ssb_bus *bus = dev->bus;
+ u32 x;
+
+ if (unlikely(do_select_core(bus, dev, &offset)))
+ return 0xFFFFFFFF;
+ x = readl(bus->mmio + offset);
+//printk("R32 0x%04X, 0x%08X\n", offset, x);
+ return x;
+}
+
+static void ssb_pcmcia_write16(struct ssb_device *dev, u16 offset, u16 value)
+{
+ struct ssb_bus *bus = dev->bus;
+
+ if (unlikely(do_select_core(bus, dev, &offset)))
+ return;
+//printk("W16 0x%04X, 0x%04X\n", offset, value);
+ writew(value, bus->mmio + offset);
+}
+
+static void ssb_pcmcia_write32(struct ssb_device *dev, u16 offset, u32 value)
+{
+ struct ssb_bus *bus = dev->bus;
+
+ if (unlikely(do_select_core(bus, dev, &offset)))
+ return;
+//printk("W32 0x%04X, 0x%08X\n", offset, value);
+ readw(bus->mmio + offset);
+ writew(value >> 16, bus->mmio + offset + 2);
+ readw(bus->mmio + offset);
+ writew(value, bus->mmio + offset);
+}
+
+const struct ssb_bus_ops ssb_pcmcia_ops = {
+ .read16 = ssb_pcmcia_read16,
+ .read32 = ssb_pcmcia_read32,
+ .write16 = ssb_pcmcia_write16,
+ .write32 = ssb_pcmcia_write32,
+};
+
+int ssb_pcmcia_init(struct ssb_bus *bus)
+{
+ conf_reg_t reg;
+ int err;
+
+ if (bus->bustype != SSB_BUSTYPE_PCMCIA)
+ return 0;
+
+ /* Switch segment to a known state and sync
+ * bus->mapped_pcmcia_seg with hardware state. */
+ ssb_pcmcia_switch_segment(bus, 0);
+
+ /* Init IRQ routing */
+ reg.Action = CS_READ;
+ reg.Function = 0;
+ if (bus->chip_id == 0x4306)
+ reg.Offset = 0x00;
+ else
+ reg.Offset = 0x80;
+ err = pcmcia_access_configuration_register(bus->host_pcmcia, &reg);
+ if (err != CS_SUCCESS)
+ goto error;
+ reg.Action = CS_WRITE;
+ reg.Value |= 0x04 | 0x01;
+ err = pcmcia_access_configuration_register(bus->host_pcmcia, &reg);
+ if (err != CS_SUCCESS)
+ goto error;
+
+ return 0;
+error:
+ return -ENODEV;
+}
diff -urN linux.old/drivers/ssb/scan.c linux.dev/drivers/ssb/scan.c
--- linux.old/drivers/ssb/scan.c 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/ssb/scan.c 2007-01-26 00:44:13.000000000 +0100
@@ -0,0 +1,373 @@
+/*
+ * Sonics Silicon Backplane
+ * Bus scanning
+ *
+ * Copyright (C) 2005-2007 Michael Buesch <mb@bu3sch.de>
+ * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
+ * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
+ * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
+ * Copyright (C) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
+ * Copyright (C) 2006 Broadcom Corporation.
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_regs.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+#include "ssb_private.h"
+
+
+const char * ssb_core_name(u16 coreid)
+{
+ switch (coreid) {
+ case SSB_DEV_CHIPCOMMON:
+ return "ChipCommon";
+ case SSB_DEV_ILINE20:
+ return "ILine 20";
+ case SSB_DEV_SDRAM:
+ return "SDRAM";
+ case SSB_DEV_PCI:
+ return "PCI";
+ case SSB_DEV_MIPS:
+ return "MIPS";
+ case SSB_DEV_ETHERNET:
+ return "Fast Ethernet";
+ case SSB_DEV_V90:
+ return "V90";
+ case SSB_DEV_USB11_HOSTDEV:
+ return "USB 1.1 Hostdev";
+ case SSB_DEV_ADSL:
+ return "ADSL";
+ case SSB_DEV_ILINE100:
+ return "ILine 100";
+ case SSB_DEV_IPSEC:
+ return "IPSEC";
+ case SSB_DEV_PCMCIA:
+ return "PCMCIA";
+ case SSB_DEV_INTERNAL_MEM:
+ return "Internal Memory";
+ case SSB_DEV_MEMC_SDRAM:
+ return "MEMC SDRAM";
+ case SSB_DEV_EXTIF:
+ return "EXTIF";
+ case SSB_DEV_80211:
+ return "IEEE 802.11";
+ case SSB_DEV_MIPS_3302:
+ return "MIPS 3302";
+ case SSB_DEV_USB11_HOST:
+ return "USB 1.1 Host";
+ case SSB_DEV_USB11_DEV:
+ return "USB 1.1 Device";
+ case SSB_DEV_USB20_HOST:
+ return "USB 2.0 Host";
+ case SSB_DEV_USB20_DEV:
+ return "USB 2.0 Device";
+ case SSB_DEV_SDIO_HOST:
+ return "SDIO Host";
+ case SSB_DEV_ROBOSWITCH:
+ return "Roboswitch";
+ case SSB_DEV_PARA_ATA:
+ return "PATA";
+ case SSB_DEV_SATA_XORDMA:
+ return "SATA XOR-DMA";
+ case SSB_DEV_ETHERNET_GBIT:
+ return "GBit Ethernet";
+ case SSB_DEV_PCIE:
+ return "PCI-E";
+ case SSB_DEV_MIMO_PHY:
+ return "MIMO PHY";
+ case SSB_DEV_SRAM_CTRLR:
+ return "SRAM Controller";
+ case SSB_DEV_MINI_MACPHY:
+ return "Mini MACPHY";
+ case SSB_DEV_ARM_1176:
+ return "ARM 1176";
+ case SSB_DEV_ARM_7TDMI:
+ return "ARM 7TDMI";
+ }
+ return "UNKNOWN";
+}
+
+static u16 pcidev_to_chipid(struct pci_dev *pci_dev)
+{
+ u16 chipid_fallback = 0;
+
+ switch (pci_dev->device) {
+ case 0x4301:
+ chipid_fallback = 0x4301;
+ break;
+ case 0x4305 ... 0x4307:
+ chipid_fallback = 0x4307;
+ break;
+ case 0x4403:
+ chipid_fallback = 0x4402;
+ break;
+ case 0x4610 ... 0x4615:
+ chipid_fallback = 0x4610;
+ break;
+ case 0x4710 ... 0x4715:
+ chipid_fallback = 0x4710;
+ break;
+ case 0x4320 ... 0x4325:
+ chipid_fallback = 0x4309;
+ break;
+ case PCI_DEVICE_ID_BCM4401:
+ case PCI_DEVICE_ID_BCM4401B0:
+ case PCI_DEVICE_ID_BCM4401B1:
+ chipid_fallback = 0x4401;
+ break;
+ default:
+ ssb_printk(KERN_ERR PFX
+ "PCI-ID not in fallback list\n");
+ }
+
+ return chipid_fallback;
+}
+
+static u8 chipid_to_nrcores(u16 chipid)
+{
+ switch (chipid) {
+ case 0x5365:
+ return 7;
+ case 0x4306:
+ return 6;
+ case 0x4310:
+ return 8;
+ case 0x4307:
+ case 0x4301:
+ return 5;
+ case 0x4401:
+ case 0x4402:
+ return 3;
+ case 0x4710:
+ case 0x4610:
+ case 0x4704:
+ return 9;
+ default:
+ ssb_printk(KERN_ERR PFX
+ "CHIPID not in nrcores fallback list\n");
+ }
+
+ return 1;
+}
+
+static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx,
+ u16 offset)
+{
+ switch (bus->bustype) {
+ case SSB_BUSTYPE_SSB:
+ offset += current_coreidx * SSB_CORE_SIZE;
+ break;
+ case SSB_BUSTYPE_PCI:
+ break;
+ case SSB_BUSTYPE_PCMCIA:
+ if (offset >= 0x800) {
+ ssb_pcmcia_switch_segment(bus, 1);
+ offset -= 0x800;
+ } else
+ ssb_pcmcia_switch_segment(bus, 0);
+ break;
+ }
+ return readl(bus->mmio + offset);
+}
+
+static int scan_switchcore(struct ssb_bus *bus, u8 coreidx)
+{
+ switch (bus->bustype) {
+ case SSB_BUSTYPE_SSB:
+ break;
+ case SSB_BUSTYPE_PCI:
+ return ssb_pci_switch_coreidx(bus, coreidx);
+ case SSB_BUSTYPE_PCMCIA:
+ return ssb_pcmcia_switch_coreidx(bus, coreidx);
+ }
+ return 0;
+}
+
+void ssb_iounmap(struct ssb_bus *bus)
+{
+ switch (bus->bustype) {
+ case SSB_BUSTYPE_SSB:
+ case SSB_BUSTYPE_PCMCIA:
+ iounmap(bus->mmio);
+ break;
+ case SSB_BUSTYPE_PCI:
+ pci_iounmap(bus->host_pci, bus->mmio);
+ break;
+ }
+ bus->mmio = NULL;
+ bus->mapped_device = NULL;
+}
+
+static void __iomem * ssb_ioremap(struct ssb_bus *bus,
+ unsigned long baseaddr)
+{
+ void __iomem *mmio = NULL;
+
+ switch (bus->bustype) {
+ case SSB_BUSTYPE_SSB:
+ /* Only map the first core for now. */
+ /* fallthrough... */
+ case SSB_BUSTYPE_PCMCIA:
+ mmio = ioremap(baseaddr, SSB_CORE_SIZE);
+ break;
+ case SSB_BUSTYPE_PCI:
+ mmio = pci_iomap(bus->host_pci, 0, ~0UL);
+ break;
+ }
+
+ return mmio;
+}
+
+int ssb_bus_scan(struct ssb_bus *bus,
+ unsigned long baseaddr)
+{
+ int err = -ENOMEM;
+ void __iomem *mmio;
+ u32 idhi, cc, rev, tmp;
+ int i;
+ struct ssb_device *dev;
+
+ mmio = ssb_ioremap(bus, baseaddr);
+ if (!mmio)
+ goto out;
+ bus->mmio = mmio;
+
+ err = scan_switchcore(bus, 0); /* Switch to first core */
+ if (err)
+ goto err_unmap;
+
+ idhi = scan_read32(bus, 0, SSB_IDHIGH);
+ cc = (idhi & SSB_IDHIGH_CC) >> SSB_IDHIGH_CC_SHIFT;
+ rev = (idhi & SSB_IDHIGH_RCLO);
+ rev |= (idhi & SSB_IDHIGH_RCHI) >> SSB_IDHIGH_RCHI_SHIFT;
+
+ bus->nr_devices = 0;
+ if (cc == SSB_DEV_CHIPCOMMON) {
+ tmp = scan_read32(bus, 0, SSB_CHIPCO_CHIPID);
+
+ bus->chip_id = (tmp & SSB_CHIPCO_IDMASK);
+ bus->chip_rev = (tmp & SSB_CHIPCO_REVMASK) >>
+ SSB_CHIPCO_REVSHIFT;
+ bus->chip_package = (tmp & SSB_CHIPCO_PACKMASK) >>
+ SSB_CHIPCO_PACKSHIFT;
+ if (rev >= 4) {
+ bus->nr_devices = (tmp & SSB_CHIPCO_NRCORESMASK) >>
+ SSB_CHIPCO_NRCORESSHIFT;
+ }
+ tmp = scan_read32(bus, 0, SSB_CHIPCO_CAP);
+ bus->chipco.capabilities = tmp;
+ } else {
+ if (bus->bustype == SSB_BUSTYPE_PCI) {
+ bus->chip_id = pcidev_to_chipid(bus->host_pci);
+ pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
+ &bus->chip_rev);
+ bus->chip_package = 0;
+ } else {
+ bus->chip_id = 0x4710;
+ bus->chip_rev = 0;
+ bus->chip_package = 0;
+ }
+ }
+ if (!bus->nr_devices)
+ bus->nr_devices = chipid_to_nrcores(bus->chip_id);
+ if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
+ ssb_printk(KERN_ERR PFX
+ "More than %d ssb cores found (%d)\n",
+ SSB_MAX_NR_CORES, bus->nr_devices);
+ goto err_unmap;
+ }
+ if (bus->bustype == SSB_BUSTYPE_SSB) {
+ /* Now that we know the number of cores,
+ * remap the whole IO space for all cores.
+ */
+ err = -ENOMEM;
+ iounmap(mmio);
+ mmio = ioremap(baseaddr, SSB_CORE_SIZE * bus->nr_devices);
+ if (!mmio)
+ goto out;
+ bus->mmio = mmio;
+ }
+
+ /* Fetch basic information about each core/device */
+ for (i = 0; i < bus->nr_devices; i++) {
+ err = scan_switchcore(bus, i);
+ if (err)
+ goto err_unmap;
+ dev = &(bus->devices[i]);
+
+ idhi = scan_read32(bus, i, SSB_IDHIGH);
+ dev->id.coreid = (idhi & SSB_IDHIGH_CC) >> SSB_IDHIGH_CC_SHIFT;
+ dev->id.revision = (idhi & SSB_IDHIGH_RCLO);
+ dev->id.revision |= (idhi & SSB_IDHIGH_RCHI) >> SSB_IDHIGH_RCHI_SHIFT;
+ dev->id.vendor = (idhi & SSB_IDHIGH_VC) >> SSB_IDHIGH_VC_SHIFT;
+ dev->core_index = i;
+ dev->bus = bus;
+ if ((dev->bus->bustype == SSB_BUSTYPE_PCI) && (bus->host_pci))
+ dev->irq = bus->host_pci->irq;
+
+ ssb_dprintk(KERN_INFO PFX
+ "Core %d found: %s "
+ "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
+ i, ssb_core_name(dev->id.coreid),
+ dev->id.coreid, dev->id.revision, dev->id.vendor);
+
+ dev->dev.bus = &ssb_bustype;
+ snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id),
+ "ssb%02x:%02x", bus->busnumber, i);
+
+ switch (dev->id.coreid) {
+ case SSB_DEV_EXTIF:
+#ifdef CONFIG_SSB_DRIVER_EXTIF
+ if (bus->extif.dev) {
+ ssb_printk(KERN_WARNING PFX
+ "WARNING: Multiple EXTIFs found\n");
+ break;
+ }
+ bus->extif.dev = dev;
+#endif /* CONFIG_SSB_DRIVER_EXTIF */
+ break;
+ case SSB_DEV_CHIPCOMMON:
+ if (bus->chipco.dev) {
+ ssb_printk(KERN_WARNING PFX
+ "WARNING: Multiple ChipCommon found\n");
+ break;
+ }
+ bus->chipco.dev = dev;
+ break;
+ case SSB_DEV_MIPS:
+ case SSB_DEV_MIPS_3302:
+#ifdef CONFIG_SSB_DRIVER_MIPS
+ if (bus->mipscore.dev) {
+ ssb_printk(KERN_WARNING PFX
+ "WARNING: Multiple MIPS cores found\n");
+ break;
+ }
+ bus->mipscore.dev = dev;
+#endif /* CONFIG_SSB_DRIVER_MIPS */
+ break;
+ case SSB_DEV_PCI:
+ case SSB_DEV_PCIE:
+#ifdef CONFIG_SSB_DRIVER_PCICORE
+ if (bus->pcicore.dev) {
+ ssb_printk(KERN_WARNING PFX
+ "WARNING: Multiple PCI(E) cores found\n");
+ break;
+ }
+ bus->pcicore.dev = dev;
+#endif /* CONFIG_SSB_DRIVER_PCICORE */
+ break;
+ default:
+ break;
+ }
+ }
+ err = 0;
+out:
+ return err;
+err_unmap:
+ ssb_iounmap(bus);
+ goto out;
+}
diff -urN linux.old/drivers/ssb/ssb_private.h linux.dev/drivers/ssb/ssb_private.h
--- linux.old/drivers/ssb/ssb_private.h 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/ssb/ssb_private.h 2007-01-26 00:44:13.000000000 +0100
@@ -0,0 +1,143 @@
+#ifndef LINUX_SSB_PRIVATE_H_
+#define LINUX_SSB_PRIVATE_H_
+
+#include <linux/ssb/ssb.h>
+#include <linux/types.h>
+#include <asm/io.h>
+
+
+#define PFX "ssb: "
+
+#ifdef CONFIG_SSB_SILENT
+# define ssb_printk(fmt, x...) do { /* nothing */ } while (0)
+#else
+# define ssb_printk printk
+#endif /* CONFIG_SSB_SILENT */
+
+/* dprintk: Debugging printk; vanishes for non-debug compilation */
+#ifdef CONFIG_SSB_DEBUG
+# define ssb_dprintk(fmt, x...) ssb_printk(fmt ,##x)
+#else
+# define ssb_dprintk(fmt, x...) do { /* nothing */ } while (0)
+#endif
+
+/* printkl: Rate limited printk */
+#define ssb_printkl(fmt, x...) do { \
+ if (printk_ratelimit()) \
+ ssb_printk(fmt ,##x); \
+ } while (0)
+
+/* dprintkl: Rate limited debugging printk */
+#ifdef CONFIG_SSB_DEBUG
+# define ssb_dprintkl ssb_printkl
+#else
+# define ssb_dprintkl(fmt, x...) do { /* nothing */ } while (0)
+#endif
+
+#define assert(cond) do { \
+ if (unlikely(!(cond))) { \
+ ssb_dprintk(KERN_ERR PFX "BUG: Assertion failed (%s) " \
+ "at: %s:%d:%s()\n", \
+ #cond, __FILE__, __LINE__, __func__); \
+ } \
+ } while (0)
+
+
+/* pci.c */
+#ifdef CONFIG_SSB_PCIHOST
+extern int ssb_pci_switch_core(struct ssb_bus *bus,
+ struct ssb_device *dev);
+extern int ssb_pci_switch_coreidx(struct ssb_bus *bus,
+ u8 coreidx);
+extern int ssb_pci_xtal(struct ssb_bus *bus, u32 what,
+ int turn_on);
+extern int ssb_pci_sprom_get(struct ssb_bus *bus);
+extern void ssb_pci_get_boardtype(struct ssb_bus *bus);
+extern int ssb_pci_init(struct ssb_bus *bus);
+extern const struct ssb_bus_ops ssb_pci_ops;
+
+#else /* CONFIG_SSB_PCIHOST */
+
+static inline int ssb_pci_switch_core(struct ssb_bus *bus,
+ struct ssb_device *dev)
+{
+ return 0;
+}
+static inline int ssb_pci_switch_coreidx(struct ssb_bus *bus,
+ u8 coreidx)
+{
+ return 0;
+}
+static inline int ssb_pci_xtal(struct ssb_bus *bus, u32 what,
+ int turn_on)
+{
+ return 0;
+}
+static inline int ssb_pci_sprom_get(struct ssb_bus *bus)
+{
+ return 0;
+}
+static inline void ssb_pci_get_boardtype(struct ssb_bus *bus)
+{
+}
+static inline int ssb_pci_init(struct ssb_bus *bus)
+{
+ return 0;
+}
+#endif /* CONFIG_SSB_PCIHOST */
+
+
+/* pcmcia.c */
+#ifdef CONFIG_SSB_PCMCIAHOST
+extern int ssb_pcmcia_switch_core(struct ssb_bus *bus,
+ struct ssb_device *dev);
+extern int ssb_pcmcia_switch_coreidx(struct ssb_bus *bus,
+ u8 coreidx);
+extern int ssb_pcmcia_switch_segment(struct ssb_bus *bus,
+ u8 seg);
+extern int ssb_pcmcia_init(struct ssb_bus *bus);
+extern const struct ssb_bus_ops ssb_pcmcia_ops;
+#else /* CONFIG_SSB_PCMCIAHOST */
+static inline int ssb_pcmcia_switch_core(struct ssb_bus *bus,
+ struct ssb_device *dev)
+{
+ return 0;
+}
+static inline int ssb_pcmcia_switch_coreidx(struct ssb_bus *bus,
+ u8 coreidx)
+{
+ return 0;
+}
+static inline int ssb_pcmcia_switch_segment(struct ssb_bus *bus,
+ u8 seg)
+{
+ return 0;
+}
+static inline int ssb_pcmcia_init(struct ssb_bus *bus)
+{
+ return 0;
+}
+#endif /* CONFIG_SSB_PCMCIAHOST */
+
+
+/* scan.c */
+extern const char * ssb_core_name(u16 coreid);
+extern int ssb_bus_scan(struct ssb_bus *bus,
+ unsigned long baseaddr);
+extern void ssb_iounmap(struct ssb_bus *ssb);
+
+
+/* core.c */
+extern struct bus_type ssb_bustype;
+extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m);
+
+
+/* Ceiling division helper. Divides x by y. */
+static inline
+unsigned long ceildiv(unsigned long x, unsigned long y)
+{
+ return ((x + (y - 1)) / y);
+}
+
+
+#endif /* LINUX_SSB_PRIVATE_H_ */
diff -urN linux.old/include/asm-mips/asm-offsets.h linux.dev/include/asm-mips/asm-offsets.h
--- linux.old/include/asm-mips/asm-offsets.h 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/include/asm-mips/asm-offsets.h 2007-01-25 23:34:01.000000000 +0100
@@ -0,0 +1,214 @@
+#ifndef __ASM_OFFSETS_H__
+#define __ASM_OFFSETS_H__
+/*
+ * DO NOT MODIFY.
+ *
+ * This file was generated by Kbuild
+ *
+ */
+
+/* MIPS pt_regs offsets. */
+#define PT_R0 24
+#define PT_R1 28
+#define PT_R2 32
+#define PT_R3 36
+#define PT_R4 40
+#define PT_R5 44
+#define PT_R6 48
+#define PT_R7 52
+#define PT_R8 56
+#define PT_R9 60
+#define PT_R10 64
+#define PT_R11 68
+#define PT_R12 72
+#define PT_R13 76
+#define PT_R14 80
+#define PT_R15 84
+#define PT_R16 88
+#define PT_R17 92
+#define PT_R18 96
+#define PT_R19 100
+#define PT_R20 104
+#define PT_R21 108
+#define PT_R22 112
+#define PT_R23 116
+#define PT_R24 120
+#define PT_R25 124
+#define PT_R26 128
+#define PT_R27 132
+#define PT_R28 136
+#define PT_R29 140
+#define PT_R30 144
+#define PT_R31 148
+#define PT_LO 160
+#define PT_HI 156
+#define PT_EPC 172
+#define PT_BVADDR 164
+#define PT_STATUS 152
+#define PT_CAUSE 168
+#define PT_SIZE 176
+
+/* MIPS task_struct offsets. */
+#define TASK_STATE 0
+#define TASK_THREAD_INFO 4
+#define TASK_FLAGS 12
+#define TASK_MM 132
+#define TASK_PID 168
+#define TASK_STRUCT_SIZE 1048
+
+/* MIPS thread_info offsets. */
+#define TI_TASK 0
+#define TI_EXEC_DOMAIN 4
+#define TI_FLAGS 8
+#define TI_TP_VALUE 12
+#define TI_CPU 16
+#define TI_PRE_COUNT 20
+#define TI_ADDR_LIMIT 24
+#define TI_RESTART_BLOCK 28
+#define TI_REGS 48
+#define _THREAD_SIZE_ORDER 0x1
+#define _THREAD_SIZE 0x2000
+#define _THREAD_MASK 0x1fff
+
+/* MIPS specific thread_struct offsets. */
+#define THREAD_REG16 432
+#define THREAD_REG17 436
+#define THREAD_REG18 440
+#define THREAD_REG19 444
+#define THREAD_REG20 448
+#define THREAD_REG21 452
+#define THREAD_REG22 456
+#define THREAD_REG23 460
+#define THREAD_REG29 464
+#define THREAD_REG30 468
+#define THREAD_REG31 472
+#define THREAD_STATUS 476
+#define THREAD_FPU 480
+#define THREAD_BVADDR 772
+#define THREAD_BUADDR 776
+#define THREAD_ECODE 780
+#define THREAD_TRAPNO 784
+#define THREAD_MFLAGS 788
+#define THREAD_TRAMP 792
+#define THREAD_OLDCTX 796
+
+#define THREAD_FPR0 480
+#define THREAD_FPR1 488
+#define THREAD_FPR2 496
+#define THREAD_FPR3 504
+#define THREAD_FPR4 512
+#define THREAD_FPR5 520
+#define THREAD_FPR6 528
+#define THREAD_FPR7 536
+#define THREAD_FPR8 544
+#define THREAD_FPR9 552
+#define THREAD_FPR10 560
+#define THREAD_FPR11 568
+#define THREAD_FPR12 576
+#define THREAD_FPR13 584
+#define THREAD_FPR14 592
+#define THREAD_FPR15 600
+#define THREAD_FPR16 608
+#define THREAD_FPR17 616
+#define THREAD_FPR18 624
+#define THREAD_FPR19 632
+#define THREAD_FPR20 640
+#define THREAD_FPR21 648
+#define THREAD_FPR22 656
+#define THREAD_FPR23 664
+#define THREAD_FPR24 672
+#define THREAD_FPR25 680
+#define THREAD_FPR26 688
+#define THREAD_FPR27 696
+#define THREAD_FPR28 704
+#define THREAD_FPR29 712
+#define THREAD_FPR30 720
+#define THREAD_FPR31 728
+#define THREAD_FCR31 736
+
+/* Linux sigcontext offsets. */
+#define SC_REGS 16
+#define SC_FPREGS 272
+#define SC_MDHI 552
+#define SC_MDLO 560
+#define SC_PC 8
+#define SC_STATUS 4
+#define SC_FPC_CSR 532
+#define SC_FPC_EIR 536
+#define SC_HI1 568
+#define SC_LO1 572
+#define SC_HI2 576
+#define SC_LO2 580
+#define SC_HI3 584
+#define SC_LO3 588
+
+/* Linux signal numbers. */
+#define _SIGHUP 0x1
+#define _SIGINT 0x2
+#define _SIGQUIT 0x3
+#define _SIGILL 0x4
+#define _SIGTRAP 0x5
+#define _SIGIOT 0x6
+#define _SIGABRT 0x6
+#define _SIGEMT 0x7
+#define _SIGFPE 0x8
+#define _SIGKILL 0x9
+#define _SIGBUS 0xa
+#define _SIGSEGV 0xb
+#define _SIGSYS 0xc
+#define _SIGPIPE 0xd
+#define _SIGALRM 0xe
+#define _SIGTERM 0xf
+#define _SIGUSR1 0x10
+#define _SIGUSR2 0x11
+#define _SIGCHLD 0x12
+#define _SIGPWR 0x13
+#define _SIGWINCH 0x14
+#define _SIGURG 0x15
+#define _SIGIO 0x16
+#define _SIGSTOP 0x17
+#define _SIGTSTP 0x18
+#define _SIGCONT 0x19
+#define _SIGTTIN 0x1a
+#define _SIGTTOU 0x1b
+#define _SIGVTALRM 0x1c
+#define _SIGPROF 0x1d
+#define _SIGXCPU 0x1e
+#define _SIGXFSZ 0x1f
+
+/* Linux irq_cpustat_t offsets. */
+#define IC_SOFTIRQ_PENDING 0
+#define IC_IRQ_CPUSTAT_T 32
+
+/* Size of struct page */
+#define STRUCT_PAGE_SIZE 32
+
+/* Linux mm_struct offsets. */
+#define MM_USERS 40
+#define MM_PGD 36
+#define MM_CONTEXT 348
+
+#define _PAGE_SIZE 0x1000
+#define _PAGE_SHIFT 0xc
+
+#define _PGD_T_SIZE 0x4
+#define _PMD_T_SIZE 0x4
+#define _PTE_T_SIZE 0x4
+
+#define _PGD_T_LOG2 $2
+#define _PMD_T_LOG2 $2
+#define _PTE_T_LOG2 $2
+
+#define _PMD_SHIFT 0x16
+#define _PGDIR_SHIFT 0x16
+
+#define _PGD_ORDER 0x0
+#define _PMD_ORDER 0x1
+#define _PTE_ORDER 0x0
+
+#define _PTRS_PER_PGD 0x400
+#define _PTRS_PER_PMD 0x1
+#define _PTRS_PER_PTE 0x400
+
+
+#endif
diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h
--- linux.old/include/asm-mips/bootinfo.h 2007-01-26 00:51:33.000000000 +0100
+++ linux.dev/include/asm-mips/bootinfo.h 2007-01-25 23:34:01.000000000 +0100
@@ -212,6 +212,12 @@
#define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */
#define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
+/*
+ * Valid machtype for group Broadcom
+ */
+#define MACH_GROUP_BRCM 23 /* Broadcom */
+#define MACH_BCM47XX 1 /* Broadcom BCM47xx */
+
#define CL_SIZE COMMAND_LINE_SIZE
const char *get_system_type(void);
diff -urN linux.old/include/asm-mips/cfe.h linux.dev/include/asm-mips/cfe.h
--- linux.old/include/asm-mips/cfe.h 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/include/asm-mips/cfe.h 2007-01-25 23:34:01.000000000 +0100
@@ -0,0 +1,189 @@
+/*
+ * Broadcom Common Firmware Environment (CFE) support
+ *
+ * Copyright 2000, 2001, 2002
+ * Broadcom Corporation. All rights reserved.
+ *
+ * Copyright (C) 2006 Michael Buesch
+ *
+ * Original Authors: Mitch Lichtenberg, Chris Demetriou
+ *
+ * This software is furnished under license and may be used and copied only
+ * in accordance with the following terms and conditions. Subject to these
+ * conditions, you may download, copy, install, use, modify and distribute
+ * modified or unmodified copies of this software in source and/or binary
+ * form. No title or ownership is transferred hereby.
+ *
+ * 1) Any source code used, modified or distributed must reproduce and
+ * retain this copyright notice and list of conditions as they appear in
+ * the source file.
+ *
+ * 2) No right is granted to use any trade name, trademark, or logo of
+ * Broadcom Corporation. The "Broadcom Corporation" name may not be
+ * used to endorse or promote products derived from this software
+ * without the prior written permission of Broadcom Corporation.
+ *
+ * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
+ * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
+ * FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
+ * LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef LINUX_CFE_API_H_
+#define LINUX_CFE_API_H_
+
+#include <linux/types.h>
+
+
+#define CFE_MI_RESERVED 0 /* memory is reserved, do not use */
+#define CFE_MI_AVAILABLE 1 /* memory is available */
+
+#define CFE_FLG_WARMSTART 0x00000001
+#define CFE_FLG_FULL_ARENA 0x00000001
+#define CFE_FLG_ENV_PERMANENT 0x00000001
+
+#define CFE_CPU_CMD_START 1
+#define CFE_CPU_CMD_STOP 0
+
+#define CFE_STDHANDLE_CONSOLE 0
+
+#define CFE_DEV_NETWORK 1
+#define CFE_DEV_DISK 2
+#define CFE_DEV_FLASH 3
+#define CFE_DEV_SERIAL 4
+#define CFE_DEV_CPU 5
+#define CFE_DEV_NVRAM 6
+#define CFE_DEV_CLOCK 7
+#define CFE_DEV_OTHER 8
+#define CFE_DEV_MASK 0x0F
+
+#define CFE_CACHE_FLUSH_D 1
+#define CFE_CACHE_INVAL_I 2
+#define CFE_CACHE_INVAL_D 4
+#define CFE_CACHE_INVAL_L2 8
+
+#define CFE_FWI_64BIT 0x00000001
+#define CFE_FWI_32BIT 0x00000002
+#define CFE_FWI_RELOC 0x00000004
+#define CFE_FWI_UNCACHED 0x00000008
+#define CFE_FWI_MULTICPU 0x00000010
+#define CFE_FWI_FUNCSIM 0x00000020
+#define CFE_FWI_RTLSIM 0x00000040
+
+struct cfe_fwinfo {
+ s64 version; /* major, minor, eco version */
+ s64 totalmem; /* total installed mem */
+ s64 flags; /* various flags */
+ s64 boardid; /* board ID */
+ s64 bootarea_va; /* VA of boot area */
+ s64 bootarea_pa; /* PA of boot area */
+ s64 bootarea_size; /* size of boot area */
+};
+
+
+/* The public CFE API */
+
+int cfe_present(void); /* Check if we booted from CFE. Returns bool */
+
+int cfe_getticks(s64 *ticks);
+int cfe_close(int handle);
+int cfe_cpu_start(int cpu, void (*fn)(void), long sp, long gp, long a1);
+int cfe_cpu_stop(int cpu);
+int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen);
+int cfe_enumdev(int idx, char *name, int namelen);
+int cfe_enummem(int idx, int flags, u64 *start, u64 *length,
+ u64 *type);
+int cfe_exit(int warm, int status);
+int cfe_flushcache(int flags);
+int cfe_getdevinfo(char *name);
+int cfe_getenv(char *name, char *dest, int destlen);
+int cfe_getfwinfo(struct cfe_fwinfo *info);
+int cfe_getstdhandle(int handletype);
+int cfe_inpstat(int handle);
+int cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer,
+ int length, int *retlen, u64 offset);
+int cfe_open(char *name);
+int cfe_read(int handle, unsigned char *buffer, int length);
+int cfe_readblk(int handle, s64 offset, unsigned char *buffer, int length);
+int cfe_setenv(char *name, char *val);
+int cfe_write(int handle, unsigned char *buffer, int length);
+int cfe_writeblk(int handle, s64 offset, unsigned char *buffer,
+ int length);
+
+
+/* High level API */
+
+/* Print some information to CFE's console (most likely serial line) */
+int cfe_printk(const char *fmt, ...) __attribute__((format(printf, 1, 2)));
+int cfe_vprintk(const char *fmt, va_list args);
+
+
+
+/* Error codes returned by the low API functions */
+
+#define CFE_ISERR(errcode) (errcode < 0)
+
+#define CFE_OK 0
+#define CFE_ERR -1 /* generic error */
+#define CFE_ERR_INV_COMMAND -2
+#define CFE_ERR_EOF -3
+#define CFE_ERR_IOERR -4
+#define CFE_ERR_NOMEM -5
+#define CFE_ERR_DEVNOTFOUND -6
+#define CFE_ERR_DEVOPEN -7
+#define CFE_ERR_INV_PARAM -8
+#define CFE_ERR_ENVNOTFOUND -9
+#define CFE_ERR_ENVREADONLY -10
+
+#define CFE_ERR_NOTELF -11
+#define CFE_ERR_NOT32BIT -12
+#define CFE_ERR_WRONGENDIAN -13
+#define CFE_ERR_BADELFVERS -14
+#define CFE_ERR_NOTMIPS -15
+#define CFE_ERR_BADELFFMT -16
+#define CFE_ERR_BADADDR -17
+
+#define CFE_ERR_FILENOTFOUND -18
+#define CFE_ERR_UNSUPPORTED -19
+
+#define CFE_ERR_HOSTUNKNOWN -20
+
+#define CFE_ERR_TIMEOUT -21
+
+#define CFE_ERR_PROTOCOLERR -22
+
+#define CFE_ERR_NETDOWN -23
+#define CFE_ERR_NONAMESERVER -24
+
+#define CFE_ERR_NOHANDLES -25
+#define CFE_ERR_ALREADYBOUND -26
+
+#define CFE_ERR_CANNOTSET -27
+#define CFE_ERR_NOMORE -28
+#define CFE_ERR_BADFILESYS -29
+#define CFE_ERR_FSNOTAVAIL -30
+
+#define CFE_ERR_INVBOOTBLOCK -31
+#define CFE_ERR_WRONGDEVTYPE -32
+#define CFE_ERR_BBCHECKSUM -33
+#define CFE_ERR_BOOTPROGCHKSUM -34
+
+#define CFE_ERR_LDRNOTAVAIL -35
+
+#define CFE_ERR_NOTREADY -36
+
+#define CFE_ERR_GETMEM -37
+#define CFE_ERR_SETMEM -38
+
+#define CFE_ERR_NOTCONN -39
+#define CFE_ERR_ADDRINUSE -40
+
+
+#endif /* LINUX_CFE_API_H_ */
diff -urN linux.old/include/asm-mips/cpu.h linux.dev/include/asm-mips/cpu.h
--- linux.old/include/asm-mips/cpu.h 2007-01-26 00:51:33.000000000 +0100
+++ linux.dev/include/asm-mips/cpu.h 2007-01-25 23:34:01.000000000 +0100
@@ -104,6 +104,13 @@
#define PRID_IMP_SR71000 0x0400
/*
+ * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
+ */
+
+#define PRID_IMP_BCM4710 0x4000
+#define PRID_IMP_BCM3302 0x9000
+
+/*
* Definitions for 7:0 on legacy processors
*/
@@ -200,7 +207,9 @@
#define CPU_SB1A 62
#define CPU_74K 63
#define CPU_R14000 64
-#define CPU_LAST 64
+#define CPU_BCM3302 65
+#define CPU_BCM4710 66
+#define CPU_LAST 66
/*
* ISA Level encodings
diff -urN linux.old/include/asm-mips/mach-bcm947xx/kernel-entry-init.h linux.dev/include/asm-mips/mach-bcm947xx/kernel-entry-init.h
--- linux.old/include/asm-mips/mach-bcm947xx/kernel-entry-init.h 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/include/asm-mips/mach-bcm947xx/kernel-entry-init.h 2007-01-25 23:34:01.000000000 +0100
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2006 Michael Buesch
+ */
+#ifndef __ASM_MACH_GENERIC_KERNEL_ENTRY_H
+#define __ASM_MACH_GENERIC_KERNEL_ENTRY_H
+
+/* Intentionally empty macro, used in head.S. Override in
+ * arch/mips/mach-xxx/kernel-entry-init.h when necessary.
+ */
+ .macro kernel_entry_setup
+ .endm
+
+/*
+ * Do SMP slave processor setup necessary before we can savely execute C code.
+ */
+ .macro smp_slave_setup
+ .endm
+
+
+#endif /* __ASM_MACH_GENERIC_KERNEL_ENTRY_H */
diff -urN linux.old/include/linux/pci_ids.h linux.dev/include/linux/pci_ids.h
--- linux.old/include/linux/pci_ids.h 2007-01-26 00:51:33.000000000 +0100
+++ linux.dev/include/linux/pci_ids.h 2007-01-25 23:34:01.000000000 +0100
@@ -1950,6 +1950,7 @@
#define PCI_DEVICE_ID_TIGON3_5906M 0x1713
#define PCI_DEVICE_ID_BCM4401 0x4401
#define PCI_DEVICE_ID_BCM4401B0 0x4402
+#define PCI_DEVICE_ID_BCM4713 0x4713
#define PCI_VENDOR_ID_TOPIC 0x151f
#define PCI_DEVICE_ID_TOPIC_TP560 0x0000
diff -urN linux.old/include/linux/ssb/ssb_driver_chipcommon.h linux.dev/include/linux/ssb/ssb_driver_chipcommon.h
--- linux.old/include/linux/ssb/ssb_driver_chipcommon.h 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/include/linux/ssb/ssb_driver_chipcommon.h 2007-01-26 00:49:32.000000000 +0100
@@ -0,0 +1,387 @@
+#ifndef LINUX_SSB_CHIPCO_H_
+#define LINUX_SSB_CHIPCO_H_
+
+/* SonicsSiliconBackplane CHIPCOMMON core hardware definitions
+ *
+ * The chipcommon core provides chip identification, SB control,
+ * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer,
+ * gpio interface, extbus, and support for serial and parallel flashes.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GPL version 2. See COPYING for details.
+ */
+#ifdef __KERNEL__
+
+/** ChipCommon core registers. **/
+
+#define SSB_CHIPCO_CHIPID 0x0000
+#define SSB_CHIPCO_IDMASK 0x0000FFFF
+#define SSB_CHIPCO_REVMASK 0x000F0000
+#define SSB_CHIPCO_REVSHIFT 16
+#define SSB_CHIPCO_PACKMASK 0x00F00000
+#define SSB_CHIPCO_PACKSHIFT 20
+#define SSB_CHIPCO_NRCORESMASK 0x0F000000
+#define SSB_CHIPCO_NRCORESSHIFT 24
+#define SSB_CHIPCO_CAP 0x0004 /* Capabilities */
+#define SSB_CHIPCO_CAP_NRUART 0x00000003 /* # of UARTs */
+#define SSB_CHIPCO_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */
+#define SSB_CHIPCO_CAP_UARTCLK 0x00000018 /* UART clock select */
+#define SSB_CHIPCO_CAP_UARTCLK_INT 0x00000008 /* UARTs are driven by internal divided clock */
+#define SSB_CHIPCO_CAP_UARTGPIO 0x00000020 /* UARTs on GPIO 15-12 */
+#define SSB_CHIPCO_CAP_EXTBUS 0x000000C0 /* External buses present */
+#define SSB_CHIPCO_CAP_FLASHT 0x00000700 /* Flash Type */
+#define SSB_CHIPCO_FLASHT_NONE 0x00000000 /* No flash */
+#define SSB_CHIPCO_FLASHT_STSER 0x00000100 /* ST serial flash */
+#define SSB_CHIPCO_FLASHT_ATSER 0x00000200 /* Atmel serial flash */
+#define SSB_CHIPCO_FLASHT_PARA 0x00000700 /* Parallel flash */
+#define SSB_CHIPCO_CAP_PLLT 0x00038000 /* PLL Type */
+#define SSB_PLLTYPE_NONE 0x00000000
+#define SSB_PLLTYPE_1 0x00010000 /* 48Mhz base, 3 dividers */
+#define SSB_PLLTYPE_2 0x00020000 /* 48Mhz, 4 dividers */
+#define SSB_PLLTYPE_3 0x00030000 /* 25Mhz, 2 dividers */
+#define SSB_PLLTYPE_4 0x00008000 /* 48Mhz, 4 dividers */
+#define SSB_PLLTYPE_5 0x00018000 /* 25Mhz, 4 dividers */
+#define SSB_PLLTYPE_6 0x00028000 /* 100/200 or 120/240 only */
+#define SSB_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */
+#define SSB_CHIPCO_CAP_PCTL 0x00040000 /* Power Control */
+#define SSB_CHIPCO_CAP_OTPS 0x00380000 /* OTP size */
+#define SSB_CHIPCO_CAP_OTPS_SHIFT 19
+#define SSB_CHIPCO_CAP_OTPS_BASE 5
+#define SSB_CHIPCO_CAP_JTAGM 0x00400000 /* JTAG master present */
+#define SSB_CHIPCO_CAP_BROM 0x00800000 /* Internal boot ROM active */
+#define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */
+#define SSB_CHIPCO_CORECTL 0x0008
+#define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
+#define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
+#define SSB_CHIPCO_BIST 0x000C
+#define SSB_CHIPCO_OTPS 0x0010 /* OTP status */
+#define SSB_CHIPCO_OTPS_PROGFAIL 0x80000000
+#define SSB_CHIPCO_OTPS_PROTECT 0x00000007
+#define SSB_CHIPCO_OTPS_HW_PROTECT 0x00000001
+#define SSB_CHIPCO_OTPS_SW_PROTECT 0x00000002
+#define SSB_CHIPCO_OTPS_CID_PROTECT 0x00000004
+#define SSB_CHIPCO_OTPC 0x0014 /* OTP control */
+#define SSB_CHIPCO_OTPC_RECWAIT 0xFF000000
+#define SSB_CHIPCO_OTPC_PROGWAIT 0x00FFFF00
+#define SSB_CHIPCO_OTPC_PRW_SHIFT 8
+#define SSB_CHIPCO_OTPC_MAXFAIL 0x00000038
+#define SSB_CHIPCO_OTPC_VSEL 0x00000006
+#define SSB_CHIPCO_OTPC_SELVL 0x00000001
+#define SSB_CHIPCO_OTPP 0x0018 /* OTP prog */
+#define SSB_CHIPCO_OTPP_COL 0x000000FF
+#define SSB_CHIPCO_OTPP_ROW 0x0000FF00
+#define SSB_CHIPCO_OTPP_ROW_SHIFT 8
+#define SSB_CHIPCO_OTPP_READERR 0x10000000
+#define SSB_CHIPCO_OTPP_VALUE 0x20000000
+#define SSB_CHIPCO_OTPP_READ 0x40000000
+#define SSB_CHIPCO_OTPP_START 0x80000000
+#define SSB_CHIPCO_OTPP_BUSY 0x80000000
+#define SSB_CHIPCO_IRQSTAT 0x0020
+#define SSB_CHIPCO_IRQMASK 0x0024
+#define SSB_CHIPCO_IRQ_GPIO 0x00000001 /* gpio intr */
+#define SSB_CHIPCO_IRQ_EXT 0x00000002 /* ro: ext intr pin (corerev >= 3) */
+#define SSB_CHIPCO_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */
+#define SSB_CHIPCO_CHIPCTL 0x0028 /* Rev >= 11 only */
+#define SSB_CHIPCO_CHIPSTAT 0x002C /* Rev >= 11 only */
+#define SSB_CHIPCO_JCMD 0x0030 /* Rev >= 10 only */
+#define SSB_CHIPCO_JCMD_START 0x80000000
+#define SSB_CHIPCO_JCMD_BUSY 0x80000000
+#define SSB_CHIPCO_JCMD_PAUSE 0x40000000
+#define SSB_CHIPCO_JCMD0_ACC_MASK 0x0000F000
+#define SSB_CHIPCO_JCMD0_ACC_IRDR 0x00000000
+#define SSB_CHIPCO_JCMD0_ACC_DR 0x00001000
+#define SSB_CHIPCO_JCMD0_ACC_IR 0x00002000
+#define SSB_CHIPCO_JCMD0_ACC_RESET 0x00003000
+#define SSB_CHIPCO_JCMD0_ACC_IRPDR 0x00004000
+#define SSB_CHIPCO_JCMD0_ACC_PDR 0x00005000
+#define SSB_CHIPCO_JCMD0_IRW_MASK 0x00000F00
+#define SSB_CHIPCO_JCMD_ACC_MASK 0x000F0000 /* Changes for corerev 11 */
+#define SSB_CHIPCO_JCMD_ACC_IRDR 0x00000000
+#define SSB_CHIPCO_JCMD_ACC_DR 0x00010000
+#define SSB_CHIPCO_JCMD_ACC_IR 0x00020000
+#define SSB_CHIPCO_JCMD_ACC_RESET 0x00030000
+#define SSB_CHIPCO_JCMD_ACC_IRPDR 0x00040000
+#define SSB_CHIPCO_JCMD_ACC_PDR 0x00050000
+#define SSB_CHIPCO_JCMD_IRW_MASK 0x00001F00
+#define SSB_CHIPCO_JCMD_IRW_SHIFT 8
+#define SSB_CHIPCO_JCMD_DRW_MASK 0x0000003F
+#define SSB_CHIPCO_JIR 0x0034 /* Rev >= 10 only */
+#define SSB_CHIPCO_JDR 0x0038 /* Rev >= 10 only */
+#define SSB_CHIPCO_JCTL 0x003C /* Rev >= 10 only */
+#define SSB_CHIPCO_JCTL_FORCE_CLK 4 /* Force clock */
+#define SSB_CHIPCO_JCTL_EXT_EN 2 /* Enable external targets */
+#define SSB_CHIPCO_JCTL_EN 1 /* Enable Jtag master */
+#define SSB_CHIPCO_FLASHCTL 0x0040
+#define SSB_CHIPCO_FLASHCTL_START 0x80000000
+#define SSB_CHIPCO_FLASHCTL_BUSY SSB_CHIPCO_FLASHCTL_START
+#define SSB_CHIPCO_FLASHADDR 0x0044
+#define SSB_CHIPCO_FLASHDATA 0x0048
+#define SSB_CHIPCO_BCAST_ADDR 0x0050
+#define SSB_CHIPCO_BCAST_DATA 0x0054
+#define SSB_CHIPCO_GPIOIN 0x0060
+#define SSB_CHIPCO_GPIOOUT 0x0064
+#define SSB_CHIPCO_GPIOOUTEN 0x0068
+#define SSB_CHIPCO_GPIOCTL 0x006C
+#define SSB_CHIPCO_GPIOPOL 0x0070
+#define SSB_CHIPCO_GPIOIRQ 0x0074
+#define SSB_CHIPCO_WATCHDOG 0x0080
+#define SSB_CHIPCO_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */
+#define SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT 16
+#define SSB_CHIPCO_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */
+#define SSB_CHIPCO_CLOCK_N 0x0090
+#define SSB_CHIPCO_CLOCK_SB 0x0094
+#define SSB_CHIPCO_CLOCK_PCI 0x0098
+#define SSB_CHIPCO_CLOCK_M2 0x009C
+#define SSB_CHIPCO_CLOCK_MIPS 0x00A0
+#define SSB_CHIPCO_CLKDIV 0x00A4 /* Rev >= 3 only */
+#define SSB_CHIPCO_CLKDIV_SFLASH 0x0F000000
+#define SSB_CHIPCO_CLKDIV_SFLASH_SHIFT 24
+#define SSB_CHIPCO_CLKDIV_OTP 0x000F0000
+#define SSB_CHIPCO_CLKDIV_OTP_SHIFT 16
+#define SSB_CHIPCO_CLKDIV_JTAG 0x00000F00
+#define SSB_CHIPCO_CLKDIV_JTAG_SHIFT 8
+#define SSB_CHIPCO_CLKDIV_UART 0x000000FF
+#define SSB_CHIPCO_PLLONDELAY 0x00B0 /* Rev >= 4 only */
+#define SSB_CHIPCO_FREFSELDELAY 0x00B4 /* Rev >= 4 only */
+#define SSB_CHIPCO_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */
+#define SSB_CHIPCO_SLOWCLKCTL_SRC 0x00000007 /* slow clock source mask */
+#define SSB_CHIPCO_SLOWCLKCTL_SRC_LPO 0x00000000 /* source of slow clock is LPO */
+#define SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL 0x00000001 /* source of slow clock is crystal */
+#define SSB_CHIPCO_SLOECLKCTL_SRC_PCI 0x00000002 /* source of slow clock is PCI */
+#define SSB_CHIPCO_SLOWCLKCTL_LPOFREQ 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */
+#define SSB_CHIPCO_SLOWCLKCTL_LPOPD 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
+#define SSB_CHIPCO_SLOWCLKCTL_FSLOW 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
+#define SSB_CHIPCO_SLOWCLKCTL_IPLL 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
+#define SSB_CHIPCO_SLOWCLKCTL_ENXTAL 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
+#define SSB_CHIPCO_SLOWCLKCTL_XTALPU 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */
+#define SSB_CHIPCO_SLOWCLKCTL_CLKDIV 0xFFFF0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */
+#define SSB_CHIPCO_SLOWCLKCTL_CLKDIV_SHIFT 16
+#define SSB_CHIPCO_SYSCLKCTL 0x00C0 /* Rev >= 3 only */
+#define SSB_CHIPCO_SYSCLKCTL_IDLPEN 0x00000001 /* ILPen: Enable Idle Low Power */
+#define SSB_CHIPCO_SYSCLKCTL_ALPEN 0x00000002 /* ALPen: Enable Active Low Power */
+#define SSB_CHIPCO_SYSCLKCTL_PLLEN 0x00000004 /* ForcePLLOn */
+#define SSB_CHIPCO_SYSCLKCTL_FORCEALP 0x00000008 /* Force ALP (or HT if ALPen is not set */
+#define SSB_CHIPCO_SYSCLKCTL_FORCEHT 0x00000010 /* Force HT */
+#define SSB_CHIPCO_SYSCLKCTL_CLKDIV 0xFFFF0000 /* ClkDiv (ILP = 1/(4+divisor)) */
+#define SSB_CHIPCO_SYSCLKCTL_CLKDIV_SHIFT 16
+#define SSB_CHIPCO_CLKSTSTR 0x00C4 /* Rev >= 3 only */
+#define SSB_CHIPCO_PCMCIA_CFG 0x0100
+#define SSB_CHIPCO_PCMCIA_MEMWAIT 0x0104
+#define SSB_CHIPCO_PCMCIA_ATTRWAIT 0x0108
+#define SSB_CHIPCO_PCMCIA_IOWAIT 0x010C
+#define SSB_CHIPCO_IDE_CFG 0x0110
+#define SSB_CHIPCO_IDE_MEMWAIT 0x0114
+#define SSB_CHIPCO_IDE_ATTRWAIT 0x0118
+#define SSB_CHIPCO_IDE_IOWAIT 0x011C
+#define SSB_CHIPCO_PROG_CFG 0x0120
+#define SSB_CHIPCO_PROG_WAITCNT 0x0124
+#define SSB_CHIPCO_FLASH_CFG 0x0128
+#define SSB_CHIPCO_FLASH_WAITCNT 0x012C
+#define SSB_CHIPCO_UART0_DATA 0x0300
+#define SSB_CHIPCO_UART0_IMR 0x0304
+#define SSB_CHIPCO_UART0_FCR 0x0308
+#define SSB_CHIPCO_UART0_LCR 0x030C
+#define SSB_CHIPCO_UART0_MCR 0x0310
+#define SSB_CHIPCO_UART0_LSR 0x0314
+#define SSB_CHIPCO_UART0_MSR 0x0318
+#define SSB_CHIPCO_UART0_SCRATCH 0x031C
+#define SSB_CHIPCO_UART1_DATA 0x0400
+#define SSB_CHIPCO_UART1_IMR 0x0404
+#define SSB_CHIPCO_UART1_FCR 0x0408
+#define SSB_CHIPCO_UART1_LCR 0x040C
+#define SSB_CHIPCO_UART1_MCR 0x0410
+#define SSB_CHIPCO_UART1_LSR 0x0414
+#define SSB_CHIPCO_UART1_MSR 0x0418
+#define SSB_CHIPCO_UART1_SCRATCH 0x041C
+
+
+
+/** Clockcontrol masks and values **/
+
+/* SSB_CHIPCO_CLOCK_N */
+#define SSB_CHIPCO_CLK_N1 0x0000003F /* n1 control */
+#define SSB_CHIPCO_CLK_N2 0x00003F00 /* n2 control */
+#define SSB_CHIPCO_CLK_N2_SHIFT 8
+#define SSB_CHIPCO_CLK_PLLC 0x000F0000 /* pll control */
+#define SSB_CHIPCO_CLK_PLLC_SHIFT 16
+
+/* SSB_CHIPCO_CLOCK_SB/PCI/UART */
+#define SSB_CHIPCO_CLK_M1 0x0000003F /* m1 control */
+#define SSB_CHIPCO_CLK_M2 0x00003F00 /* m2 control */
+#define SSB_CHIPCO_CLK_M2_SHIFT 8
+#define SSB_CHIPCO_CLK_M3 0x003F0000 /* m3 control */
+#define SSB_CHIPCO_CLK_M3_SHIFT 16
+#define SSB_CHIPCO_CLK_MC 0x1F000000 /* mux control */
+#define SSB_CHIPCO_CLK_MC_SHIFT 24
+
+/* N3M Clock control magic field values */
+#define SSB_CHIPCO_CLK_F6_2 0x02 /* A factor of 2 in */
+#define SSB_CHIPCO_CLK_F6_3 0x03 /* 6-bit fields like */
+#define SSB_CHIPCO_CLK_F6_4 0x05 /* N1, M1 or M3 */
+#define SSB_CHIPCO_CLK_F6_5 0x09
+#define SSB_CHIPCO_CLK_F6_6 0x11
+#define SSB_CHIPCO_CLK_F6_7 0x21
+
+#define SSB_CHIPCO_CLK_F5_BIAS 5 /* 5-bit fields get this added */
+
+#define SSB_CHIPCO_CLK_MC_BYPASS 0x08
+#define SSB_CHIPCO_CLK_MC_M1 0x04
+#define SSB_CHIPCO_CLK_MC_M1M2 0x02
+#define SSB_CHIPCO_CLK_MC_M1M2M3 0x01
+#define SSB_CHIPCO_CLK_MC_M1M3 0x11
+
+/* Type 2 Clock control magic field values */
+#define SSB_CHIPCO_CLK_T2_BIAS 2 /* n1, n2, m1 & m3 bias */
+#define SSB_CHIPCO_CLK_T2M2_BIAS 3 /* m2 bias */
+
+#define SSB_CHIPCO_CLK_T2MC_M1BYP 1
+#define SSB_CHIPCO_CLK_T2MC_M2BYP 2
+#define SSB_CHIPCO_CLK_T2MC_M3BYP 4
+
+/* Type 6 Clock control magic field values */
+#define SSB_CHIPCO_CLK_T6_MMASK 1 /* bits of interest in m */
+#define SSB_CHIPCO_CLK_T6_M0 120000000 /* sb clock for m = 0 */
+#define SSB_CHIPCO_CLK_T6_M1 100000000 /* sb clock for m = 1 */
+#define SSB_CHIPCO_CLK_SB2MIPS_T6(sb) (2 * (sb))
+
+/* Common clock base */
+#define SSB_CHIPCO_CLK_BASE1 24000000 /* Half the clock freq */
+#define SSB_CHIPCO_CLK_BASE2 12500000 /* Alternate crystal on some PLL's */
+
+/* Clock control values for 200Mhz in 5350 */
+#define SSB_CHIPCO_CLK_5350_N 0x0311
+#define SSB_CHIPCO_CLK_5350_M 0x04020009
+
+
+/** Bits in the config registers **/
+
+#define SSB_CHIPCO_CFG_EN 0x0001 /* Enable */
+#define SSB_CHIPCO_CFG_EXTM 0x000E /* Extif Mode */
+#define SSB_CHIPCO_CFG_EXTM_ASYNC 0x0002 /* Async/Parallel flash */
+#define SSB_CHIPCO_CFG_EXTM_SYNC 0x0004 /* Synchronous */
+#define SSB_CHIPCO_CFG_EXTM_PCMCIA 0x0008 /* PCMCIA */
+#define SSB_CHIPCO_CFG_EXTM_IDE 0x000A /* IDE */
+#define SSB_CHIPCO_CFG_DS16 0x0010 /* Data size, 0=8bit, 1=16bit */
+#define SSB_CHIPCO_CFG_CLKDIV 0x0060 /* Sync: Clock divisor */
+#define SSB_CHIPCO_CFG_CLKEN 0x0080 /* Sync: Clock enable */
+#define SSB_CHIPCO_CFG_BSTRO 0x0100 /* Sync: Size/Bytestrobe */
+
+
+/** Flash-specific control/status values */
+
+/* flashcontrol opcodes for ST flashes */
+#define SSB_CHIPCO_FLASHCTL_ST_WREN 0x0006 /* Write Enable */
+#define SSB_CHIPCO_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */
+#define SSB_CHIPCO_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */
+#define SSB_CHIPCO_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */
+#define SSB_CHIPCO_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */
+#define SSB_CHIPCO_FLASHCTL_ST_PP 0x0302 /* Page Program */
+#define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */
+#define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */
+#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */
+#define SSB_CHIPCO_FLASHCTL_ST_RSIG 0x03AB /* Read Electronic Signature */
+
+/* Status register bits for ST flashes */
+#define SSB_CHIPCO_FLASHSTA_ST_WIP 0x01 /* Write In Progress */
+#define SSB_CHIPCO_FLASHSTA_ST_WEL 0x02 /* Write Enable Latch */
+#define SSB_CHIPCO_FLASHSTA_ST_BP 0x1C /* Block Protect */
+#define SSB_CHIPCO_FLASHSTA_ST_BP_SHIFT 2
+#define SSB_CHIPCO_FLASHSTA_ST_SRWD 0x80 /* Status Register Write Disable */
+
+/* flashcontrol opcodes for Atmel flashes */
+#define SSB_CHIPCO_FLASHCTL_AT_READ 0x07E8
+#define SSB_CHIPCO_FLASHCTL_AT_PAGE_READ 0x07D2
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_READ /* FIXME */
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_READ /* FIXME */
+#define SSB_CHIPCO_FLASHCTL_AT_STATUS 0x01D7
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE 0x0384
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_WRITE 0x0387
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_ERASE_PRGM 0x0283 /* Erase program */
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_ERASE_PRGM 0x0286 /* Erase program */
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM 0x0288
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_PROGRAM 0x0289
+#define SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE 0x0281
+#define SSB_CHIPCO_FLASHCTL_AT_BLOCK_ERASE 0x0250
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_WRER_PRGM 0x0382 /* Write erase program */
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_WRER_PRGM 0x0385 /* Write erase program */
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD 0x0253
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_LOAD 0x0255
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_COMPARE 0x0260
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_COMPARE 0x0261
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_REPROGRAM 0x0258
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_REPROGRAM 0x0259
+
+/* Status register bits for Atmel flashes */
+#define SSB_CHIPCO_FLASHSTA_AT_READY 0x80
+#define SSB_CHIPCO_FLASHSTA_AT_MISMATCH 0x40
+#define SSB_CHIPCO_FLASHSTA_AT_ID 0x38
+#define SSB_CHIPCO_FLASHSTA_AT_ID_SHIFT 3
+
+
+/** OTP **/
+
+/* OTP regions */
+#define SSB_CHIPCO_OTP_HW_REGION SSB_CHIPCO_OTPS_HW_PROTECT
+#define SSB_CHIPCO_OTP_SW_REGION SSB_CHIPCO_OTPS_SW_PROTECT
+#define SSB_CHIPCO_OTP_CID_REGION SSB_CHIPCO_OTPS_CID_PROTECT
+
+/* OTP regions (Byte offsets from otp size) */
+#define SSB_CHIPCO_OTP_SWLIM_OFF (-8)
+#define SSB_CHIPCO_OTP_CIDBASE_OFF 0
+#define SSB_CHIPCO_OTP_CIDLIM_OFF 8
+
+/* Predefined OTP words (Word offset from otp size) */
+#define SSB_CHIPCO_OTP_BOUNDARY_OFF (-4)
+#define SSB_CHIPCO_OTP_HWSIGN_OFF (-3)
+#define SSB_CHIPCO_OTP_SWSIGN_OFF (-2)
+#define SSB_CHIPCO_OTP_CIDSIGN_OFF (-1)
+
+#define SSB_CHIPCO_OTP_CID_OFF 0
+#define SSB_CHIPCO_OTP_PKG_OFF 1
+#define SSB_CHIPCO_OTP_FID_OFF 2
+#define SSB_CHIPCO_OTP_RSV_OFF 3
+#define SSB_CHIPCO_OTP_LIM_OFF 4
+
+#define SSB_CHIPCO_OTP_SIGNATURE 0x578A
+#define SSB_CHIPCO_OTP_MAGIC 0x4E56
+
+
+struct ssb_device;
+struct ssb_serial_port;
+
+struct ssb_chipcommon {
+ struct ssb_device *dev;
+ u32 capabilities;
+ /* Fast Powerup Delay constant */
+ u16 fast_pwrup_delay;
+};
+
+extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
+
+#include <linux/pm.h>
+extern void ssb_chipco_suspend(struct ssb_chipcommon *cc, pm_message_t state);
+extern void ssb_chipco_resume(struct ssb_chipcommon *cc);
+
+extern void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
+ u32 *plltype, u32 *n, u32 *m);
+extern void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
+ unsigned long ns_per_cycle);
+
+enum ssb_clkmode {
+ SSB_CLKMODE_SLOW,
+ SSB_CLKMODE_FAST,
+ SSB_CLKMODE_DYNAMIC,
+};
+
+extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
+ enum ssb_clkmode mode);
+
+#ifdef CONFIG_SSB_SERIAL
+extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
+ struct ssb_serial_port *ports);
+#endif /* CONFIG_SSB_SERIAL */
+
+#endif /* __KERNEL__ */
+#endif /* LINUX_SSB_CHIPCO_H_ */
diff -urN linux.old/include/linux/ssb/ssb_driver_extif.h linux.dev/include/linux/ssb/ssb_driver_extif.h
--- linux.old/include/linux/ssb/ssb_driver_extif.h 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/include/linux/ssb/ssb_driver_extif.h 2007-01-26 00:49:32.000000000 +0100
@@ -0,0 +1,163 @@
+/*
+ * Hardware-specific External Interface I/O core definitions
+ * for the BCM47xx family of SiliconBackplane-based chips.
+ *
+ * The External Interface core supports a total of three external chip selects
+ * supporting external interfaces. One of the external chip selects is
+ * used for Flash, one is used for PCMCIA, and the other may be
+ * programmed to support either a synchronous interface or an
+ * asynchronous interface. The asynchronous interface can be used to
+ * support external devices such as UARTs and the BCM2019 Bluetooth
+ * baseband processor.
+ * The external interface core also contains 2 on-chip 16550 UARTs, clock
+ * frequency control, a watchdog interrupt timer, and a GPIO interface.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, Michael Buesch
+ *
+ * Licensed under the GPL version 2. See COPYING for details.
+ */
+#ifndef LINUX_SSB_EXTIFCORE_H_
+#define LINUX_SSB_EXTIFCORE_H_
+
+#ifdef __KERNEL__
+
+struct ssb_extif {
+ struct ssb_device *dev;
+};
+
+/* external interface address space */
+#define SSB_EXTIF_PCMCIA_MEMBASE(x) (x)
+#define SSB_EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000)
+#define SSB_EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000)
+#define SSB_EXTIF_CFGIF_BASE(x) ((x) + 0x800000)
+#define SSB_EXTIF_FLASH_BASE(x) ((x) + 0xc00000)
+
+#define SSB_EXTIF_NR_GPIOOUT 5
+/* GPIO NOTE:
+ * The multiple instances of output and output enable registers
+ * are present to allow driver software for multiple cores to control
+ * gpio outputs without needing to share a single register pair.
+ * Use the following helper macro to get a register offset value.
+ */
+#define SSB_EXTIF_GPIO_OUT(index) ({ \
+ BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT); \
+ SSB_EXTIF_GPIO_OUT_BASE + ((index) * 8); \
+ })
+#define SSB_EXTIF_GPIO_OUTEN(index) ({ \
+ BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT); \
+ SSB_EXTIF_GPIO_OUTEN_BASE + ((index) * 8); \
+ })
+
+/** EXTIF core registers **/
+
+#define SSB_EXTIF_CTL 0x0000
+#define SSB_EXTIF_CTL_UARTEN (1 << 0) /* UART enable */
+#define SSB_EXTIF_EXTSTAT 0x0004
+#define SSB_EXTIF_EXTSTAT_EMODE (1 << 0) /* Endian mode (ro) */
+#define SSB_EXTIF_EXTSTAT_EIRQPIN (1 << 1) /* External interrupt pin (ro) */
+#define SSB_EXTIF_EXTSTAT_GPIOIRQPIN (1 << 2) /* GPIO interrupt pin (ro) */
+#define SSB_EXTIF_PCMCIA_CFG 0x0010
+#define SSB_EXTIF_PCMCIA_MEMWAIT 0x0014
+#define SSB_EXTIF_PCMCIA_ATTRWAIT 0x0018
+#define SSB_EXTIF_PCMCIA_IOWAIT 0x001C
+#define SSB_EXTIF_PROG_CFG 0x0020
+#define SSB_EXTIF_PROG_WAITCNT 0x0024
+#define SSB_EXTIF_FLASH_CFG 0x0028
+#define SSB_EXTIF_FLASH_WAITCNT 0x002C
+#define SSB_EXTIF_WATCHDOG 0x0040
+#define SSB_EXTIF_CLOCK_N 0x0044
+#define SSB_EXTIF_CLOCK_SB 0x0048
+#define SSB_EXTIF_CLOCK_PCI 0x004C
+#define SSB_EXTIF_CLOCK_MII 0x0050
+#define SSB_EXTIF_GPIO_IN 0x0060
+#define SSB_EXTIF_GPIO_OUT_BASE 0x0064
+#define SSB_EXTIF_GPIO_OUTEN_BASE 0x0068
+#define SSB_EXTIF_EJTAG_OUTEN 0x0090
+#define SSB_EXTIF_GPIO_INTPOL 0x0094
+#define SSB_EXTIF_GPIO_INTMASK 0x0098
+#define SSB_EXTIF_UART_DATA 0x0300
+#define SSB_EXTIF_UART_TIMER 0x0310
+#define SSB_EXTIF_UART_FCR 0x0320
+#define SSB_EXTIF_UART_LCR 0x0330
+#define SSB_EXTIF_UART_MCR 0x0340
+#define SSB_EXTIF_UART_LSR 0x0350
+#define SSB_EXTIF_UART_MSR 0x0360
+#define SSB_EXTIF_UART_SCRATCH 0x0370
+
+
+
+
+/* pcmcia/prog/flash_config */
+#define SSB_EXTCFG_EN (1 << 0) /* enable */
+#define SSB_EXTCFG_MODE 0xE /* mode */
+#define SSB_EXTCFG_MODE_SHIFT 1
+#define SSB_EXTCFG_MODE_FLASH 0x0 /* flash/asynchronous mode */
+#define SSB_EXTCFG_MODE_SYNC 0x2 /* synchronous mode */
+#define SSB_EXTCFG_MODE_PCMCIA 0x4 /* pcmcia mode */
+#define SSB_EXTCFG_DS16 (1 << 4) /* destsize: 0=8bit, 1=16bit */
+#define SSB_EXTCFG_BSWAP (1 << 5) /* byteswap */
+#define SSB_EXTCFG_CLKDIV 0xC0 /* clock divider */
+#define SSB_EXTCFG_CLKDIV_SHIFT 6
+#define SSB_EXTCFG_CLKDIV_2 0x0 /* backplane/2 */
+#define SSB_EXTCFG_CLKDIV_3 0x40 /* backplane/3 */
+#define SSB_EXTCFG_CLKDIV_4 0x80 /* backplane/4 */
+#define SSB_EXTCFG_CLKEN (1 << 8) /* clock enable */
+#define SSB_EXTCFG_STROBE (1 << 9) /* size/bytestrobe (synch only) */
+
+/* pcmcia_memwait */
+#define SSB_PCMCIA_MEMW_0 0x0000003F /* waitcount0 */
+#define SSB_PCMCIA_MEMW_1 0x00001F00 /* waitcount1 */
+#define SSB_PCMCIA_MEMW_1_SHIFT 8
+#define SSB_PCMCIA_MEMW_2 0x001F0000 /* waitcount2 */
+#define SSB_PCMCIA_MEMW_2_SHIFT 16
+#define SSB_PCMCIA_MEMW_3 0x1F000000 /* waitcount3 */
+#define SSB_PCMCIA_MEMW_3_SHIFT 24
+
+/* pcmcia_attrwait */
+#define SSB_PCMCIA_ATTW_0 0x0000003F /* waitcount0 */
+#define SSB_PCMCIA_ATTW_1 0x00001F00 /* waitcount1 */
+#define SSB_PCMCIA_ATTW_1_SHIFT 8
+#define SSB_PCMCIA_ATTW_2 0x001F0000 /* waitcount2 */
+#define SSB_PCMCIA_ATTW_2_SHIFT 16
+#define SSB_PCMCIA_ATTW_3 0x1F000000 /* waitcount3 */
+#define SSB_PCMCIA_ATTW_3_SHIFT 24
+
+/* pcmcia_iowait */
+#define SSB_PCMCIA_IOW_0 0x0000003F /* waitcount0 */
+#define SSB_PCMCIA_IOW_1 0x00001F00 /* waitcount1 */
+#define SSB_PCMCIA_IOW_1_SHIFT 8
+#define SSB_PCMCIA_IOW_2 0x001F0000 /* waitcount2 */
+#define SSB_PCMCIA_IOW_2_SHIFT 16
+#define SSB_PCMCIA_IOW_3 0x1F000000 /* waitcount3 */
+#define SSB_PCMCIA_IOW_3_SHIFT 24
+
+/* prog_waitcount */
+#define SSB_PROG_WCNT_0 0x0000001F /* waitcount0 */
+#define SSB_PROG_WCNT_1 0x00001F00 /* waitcount1 */
+#define SSB_PROG_WCNT_1_SHIFT 8
+#define SSB_PROG_WCNT_2 0x001F0000 /* waitcount2 */
+#define SSB_PROG_WCNT_2_SHIFT 16
+#define SSB_PROG_WCNT_3 0x1F000000 /* waitcount3 */
+#define SSB_PROG_WCNT_3_SHIFT 24
+
+#define SSB_PROG_W0 0x0000000C
+#define SSB_PROG_W1 0x00000A00
+#define SSB_PROG_W2 0x00020000
+#define SSB_PROG_W3 0x01000000
+
+/* flash_waitcount */
+#define SSB_FLASH_WCNT_0 0x0000001F /* waitcount0 */
+#define SSB_FLASH_WCNT_1 0x00001F00 /* waitcount1 */
+#define SSB_FLASH_WCNT_1_SHIFT 8
+#define SSB_FLASH_WCNT_2 0x001F0000 /* waitcount2 */
+#define SSB_FLASH_WCNT_2_SHIFT 16
+#define SSB_FLASH_WCNT_3 0x1F000000 /* waitcount3 */
+#define SSB_FLASH_WCNT_3_SHIFT 24
+
+/* watchdog */
+#define SSB_EXTIF_WATCHDOG_CLK 48000000 /* Hz */
+
+
+#endif /* __KERNEL__ */
+#endif /* LINUX_SSB_EXTIFCORE_H_ */
diff -urN linux.old/include/linux/ssb/ssb_driver_mips.h linux.dev/include/linux/ssb/ssb_driver_mips.h
--- linux.old/include/linux/ssb/ssb_driver_mips.h 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/include/linux/ssb/ssb_driver_mips.h 2007-01-26 00:49:32.000000000 +0100
@@ -0,0 +1,47 @@
+#ifndef LINUX_SSB_MIPSCORE_H_
+#define LINUX_SSB_MIPSCORE_H_
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_SSB_DRIVER_MIPS
+
+struct ssb_device;
+
+struct ssb_serial_port {
+ void *regs;
+ unsigned long clockspeed;
+ unsigned int irq;
+ unsigned int baud_base;
+ unsigned int reg_shift;
+};
+
+
+struct ssb_mipscore {
+ struct ssb_device *dev;
+
+ int nr_serial_ports;
+ struct ssb_serial_port serial_ports[4];
+
+ u32 flash_window;
+ u32 flash_window_size;
+};
+
+extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
+
+extern unsigned int ssb_mips_irq(struct ssb_device *dev);
+
+
+#else /* CONFIG_SSB_DRIVER_MIPS */
+
+struct ssb_mipscore {
+};
+
+static inline
+void ssb_mipscore_init(struct ssb_mipscore *mcore)
+{
+}
+
+#endif /* CONFIG_SSB_DRIVER_MIPS */
+
+#endif /* __KERNEL__ */
+#endif /* LINUX_SSB_MIPSCORE_H_ */
diff -urN linux.old/include/linux/ssb/ssb_driver_pci.h linux.dev/include/linux/ssb/ssb_driver_pci.h
--- linux.old/include/linux/ssb/ssb_driver_pci.h 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/include/linux/ssb/ssb_driver_pci.h 2007-01-26 00:49:32.000000000 +0100
@@ -0,0 +1,108 @@
+#ifndef LINUX_SSB_PCICORE_H_
+#define LINUX_SSB_PCICORE_H_
+#ifdef __KERNEL__
+
+#ifdef CONFIG_SSB_DRIVER_PCICORE
+
+/* PCI core registers. */
+#define SSB_PCICORE_CTL 0x0000 /* PCI Control */
+#define SSB_PCICORE_CTL_RST_OE 0x00000001 /* PCI_RESET Output Enable */
+#define SSB_PCICORE_CTL_RST 0x00000002 /* PCI_RESET driven out to pin */
+#define SSB_PCICORE_CTL_CLK_OE 0x00000004 /* Clock gate Output Enable */
+#define SSB_PCICORE_CTL_CLK 0x00000008 /* Gate for clock driven out to pin */
+#define SSB_PCICORE_ARBCTL 0x0010 /* PCI Arbiter Control */
+#define SSB_PCICORE_ARBCTL_INTERN 0x00000001 /* Use internal arbiter */
+#define SSB_PCICORE_ARBCTL_EXTERN 0x00000002 /* Use external arbiter */
+#define SSB_PCICORE_ARBCTL_PARKID 0x00000006 /* Mask, selects which agent is parked on an idle bus */
+#define SSB_PCICORE_ARBCTL_PARKID_LAST 0x00000000 /* Last requestor */
+#define SSB_PCICORE_ARBCTL_PARKID_4710 0x00000002 /* 4710 */
+#define SSB_PCICORE_ARBCTL_PARKID_EXT0 0x00000004 /* External requestor 0 */
+#define SSB_PCICORE_ARBCTL_PARKID_EXT1 0x00000006 /* External requestor 1 */
+#define SSB_PCICORE_ISTAT 0x0020 /* Interrupt status */
+#define SSB_PCICORE_ISTAT_INTA 0x00000001 /* PCI INTA# */
+#define SSB_PCICORE_ISTAT_INTB 0x00000002 /* PCI INTB# */
+#define SSB_PCICORE_ISTAT_SERR 0x00000004 /* PCI SERR# (write to clear) */
+#define SSB_PCICORE_ISTAT_PERR 0x00000008 /* PCI PERR# (write to clear) */
+#define SSB_PCICORE_ISTAT_PME 0x00000010 /* PCI PME# */
+#define SSB_PCICORE_IMASK 0x0024 /* Interrupt mask */
+#define SSB_PCICORE_IMASK_INTA 0x00000001 /* PCI INTA# */
+#define SSB_PCICORE_IMASK_INTB 0x00000002 /* PCI INTB# */
+#define SSB_PCICORE_IMASK_SERR 0x00000004 /* PCI SERR# */
+#define SSB_PCICORE_IMASK_PERR 0x00000008 /* PCI PERR# */
+#define SSB_PCICORE_IMASK_PME 0x00000010 /* PCI PME# */
+#define SSB_PCICORE_MBOX 0x0028 /* Backplane to PCI Mailbox */
+#define SSB_PCICORE_MBOX_F0_0 0x00000100 /* PCI function 0, INT 0 */
+#define SSB_PCICORE_MBOX_F0_1 0x00000200 /* PCI function 0, INT 1 */
+#define SSB_PCICORE_MBOX_F1_0 0x00000400 /* PCI function 1, INT 0 */
+#define SSB_PCICORE_MBOX_F1_1 0x00000800 /* PCI function 1, INT 1 */
+#define SSB_PCICORE_MBOX_F2_0 0x00001000 /* PCI function 2, INT 0 */
+#define SSB_PCICORE_MBOX_F2_1 0x00002000 /* PCI function 2, INT 1 */
+#define SSB_PCICORE_MBOX_F3_0 0x00004000 /* PCI function 3, INT 0 */
+#define SSB_PCICORE_MBOX_F3_1 0x00008000 /* PCI function 3, INT 1 */
+#define SSB_PCICORE_BCAST_ADDR 0x0050 /* Backplane Broadcast Address */
+#define SSB_PCICORE_BCAST_ADDR_MASK 0x000000FF
+#define SSB_PCICORE_BCAST_DATA 0x0054 /* Backplane Broadcast Data */
+#define SSB_PCICORE_GPIO_IN 0x0060 /* rev >= 2 only */
+#define SSB_PCICORE_GPIO_OUT 0x0064 /* rev >= 2 only */
+#define SSB_PCICORE_GPIO_ENABLE 0x0068 /* rev >= 2 only */
+#define SSB_PCICORE_GPIO_CTL 0x006C /* rev >= 2 only */
+#define SSB_PCICORE_SBTOPCI0 0x0100 /* Backplane to PCI translation 0 (sbtopci0) */
+#define SSB_PCICORE_SBTOPCI0_MASK 0xFC000000
+#define SSB_PCICORE_SBTOPCI1 0x0104 /* Backplane to PCI translation 1 (sbtopci1) */
+#define SSB_PCICORE_SBTOPCI1_MASK 0xFC000000
+#define SSB_PCICORE_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */
+#define SSB_PCICORE_SBTOPCI2_MASK 0xC0000000
+
+/* SBtoPCIx */
+#define SSB_PCICORE_SBTOPCI_MEM 0x00000000
+#define SSB_PCICORE_SBTOPCI_IO 0x00000001
+#define SSB_PCICORE_SBTOPCI_CFG0 0x00000002
+#define SSB_PCICORE_SBTOPCI_CFG1 0x00000003
+#define SSB_PCICORE_SBTOPCI_PREF 0x00000004 /* Prefetch enable */
+#define SSB_PCICORE_SBTOPCI_BURST 0x00000008 /* Burst enable */
+#define SSB_PCICORE_SBTOPCI_MRM 0x00000020 /* Memory Read Multiple */
+#define SSB_PCICORE_SBTOPCI_RC 0x00000030 /* Read Command mask (rev >= 11) */
+#define SSB_PCICORE_SBTOPCI_RC_READ 0x00000000 /* Memory read */
+#define SSB_PCICORE_SBTOPCI_RC_READL 0x00000010 /* Memory read line */
+#define SSB_PCICORE_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */
+
+
+/* PCIcore specific boardflags */
+#define SSB_PCICORE_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */
+
+
+struct ssb_pcicore {
+ struct ssb_device *dev;
+ u8 setup_done:1;
+ u8 hostmode:1;
+ u8 cardbusmode:1;
+};
+
+extern void ssb_pcicore_init(struct ssb_pcicore *pc);
+
+/* Enable IRQ routing for a specific device */
+extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
+ struct ssb_device *dev);
+
+
+#else /* CONFIG_SSB_DRIVER_PCICORE */
+
+
+struct ssb_pcicore {
+};
+
+static inline
+void ssb_pcicore_init(struct ssb_pcicore *pc)
+{
+}
+
+static inline
+int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
+ struct ssb_device *dev)
+{
+ return 0;
+}
+
+#endif /* CONFIG_SSB_DRIVER_PCICORE */
+#endif /* __KERNEL__ */
+#endif /* LINUX_SSB_PCICORE_H_ */
diff -urN linux.old/include/linux/ssb/ssb.h linux.dev/include/linux/ssb/ssb.h
--- linux.old/include/linux/ssb/ssb.h 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/include/linux/ssb/ssb.h 2007-01-26 00:49:32.000000000 +0100
@@ -0,0 +1,358 @@
+#ifndef LINUX_SSB_H_
+#define LINUX_SSB_H_
+#ifdef __KERNEL__
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+
+#include <linux/ssb/ssb_regs.h>
+
+
+struct pcmcia_device;
+struct ssb_bus;
+struct ssb_driver;
+
+
+struct ssb_sprom_r1 {
+ u16 pci_spid; /* Subsystem Product ID for PCI */
+ u16 pci_svid; /* Subsystem Vendor ID for PCI */
+ u16 pci_pid; /* Product ID for PCI */
+ u8 il0mac[6]; /* MAC address for 802.11b/g */
+ u8 et0mac[6]; /* MAC address for Ethernet */
+ u8 et1mac[6]; /* MAC address for 802.11a */
+ u8 et0phyaddr:5; /* MII address for enet0 */
+ u8 et1phyaddr:5; /* MII address for enet1 */
+ u8 et0mdcport:1; /* MDIO for enet0 */
+ u8 et1mdcport:1; /* MDIO for enet1 */
+ u8 board_rev; /* Board revision */
+ u8 country_code:4; /* Country Code */
+ u8 antenna_a:2; /* Antenna 0/1 available for A-PHY */
+ u8 antenna_bg:2; /* Antenna 0/1 available for B-PHY and G-PHY */
+ u16 pa0b0;
+ u16 pa0b1;
+ u16 pa0b2;
+ u16 pa1b0;
+ u16 pa1b1;
+ u16 pa1b2;
+ u8 gpio0; /* GPIO pin 0 */
+ u8 gpio1; /* GPIO pin 1 */
+ u8 gpio2; /* GPIO pin 2 */
+ u8 gpio3; /* GPIO pin 3 */
+ u16 maxpwr_a; /* A-PHY Power Amplifier Max Power (in dBm Q5.2) */
+ u16 maxpwr_bg; /* B/G-PHY Power Amplifier Max Power (in dBm Q5.2) */
+ u8 itssi_a; /* Idle TSSI Target for A-PHY */
+ u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
+ u16 boardflags_lo; /* Boardflags (low 16 bits) */
+ u8 antenna_gain_a; /* A-PHY Antenna gain (in dBm Q5.2) */
+ u8 antenna_gain_bg; /* B/G-PHY Antenna gain (in dBm Q5.2) */
+ u8 oem[8]; /* OEM string (rev 1 only) */
+};
+
+struct ssb_sprom_r2 {
+ u16 boardflags_hi; /* Boardflags (high 16 bits) */
+ u8 maxpwr_a_lo; /* A-PHY Max Power Low */
+ u8 maxpwr_a_hi; /* A-PHY Max Power High */
+ u16 pa1lob0; /* A-PHY PA Low Settings */
+ u16 pa1lob1; /* A-PHY PA Low Settings */
+ u16 pa1lob2; /* A-PHY PA Low Settings */
+ u16 pa1hib0; /* A-PHY PA High Settings */
+ u16 pa1hib1; /* A-PHY PA High Settings */
+ u16 pa1hib2; /* A-PHY PA High Settings */
+ u8 ofdm_pwr_off; /* OFDM Power Offset from CCK Level */
+ u8 country_str[2]; /* Two char Country Code */
+};
+
+struct ssb_sprom_r3 {
+ u32 ofdmapo; /* A-PHY OFDM Mid Power Offset */
+ u32 ofdmalpo; /* A-PHY OFDM Low Power Offset */
+ u32 ofdmahpo; /* A-PHY OFDM High Power Offset */
+ u8 gpioldc_on_cnt; /* GPIO LED Powersave Duty Cycle ON count */
+ u8 gpioldc_off_cnt; /* GPIO LED Powersave Duty Cycle OFF count */
+ u8 cckpo_1M:4; /* CCK Power Offset for Rate 1M */
+ u8 cckpo_2M:4; /* CCK Power Offset for Rate 2M */
+ u8 cckpo_55M:4; /* CCK Power Offset for Rate 5.5M */
+ u8 cckpo_11M:4; /* CCK Power Offset for Rate 11M */
+ u32 ofdmgpo; /* G-PHY OFDM Power Offset */
+};
+
+struct ssb_sprom_r4 {
+ /* TODO */
+};
+
+struct ssb_sprom {
+ u8 revision;
+ u8 crc;
+ /* The valid r# fields are selected by the "revision".
+ * Revision 3 and lower inherit from lower revisions.
+ */
+ union {
+ struct {
+ struct ssb_sprom_r1 r1;
+ struct ssb_sprom_r2 r2;
+ struct ssb_sprom_r3 r3;
+ };
+ struct ssb_sprom_r4 r4;
+ };
+};
+
+
+/* Core-ID values. */
+#define SSB_DEV_CHIPCOMMON 0x800
+#define SSB_DEV_ILINE20 0x801
+#define SSB_DEV_SDRAM 0x803
+#define SSB_DEV_PCI 0x804
+#define SSB_DEV_MIPS 0x805
+#define SSB_DEV_ETHERNET 0x806
+#define SSB_DEV_V90 0x807
+#define SSB_DEV_USB11_HOSTDEV 0x808
+#define SSB_DEV_ADSL 0x809
+#define SSB_DEV_ILINE100 0x80A
+#define SSB_DEV_IPSEC 0x80B
+#define SSB_DEV_PCMCIA 0x80D
+#define SSB_DEV_INTERNAL_MEM 0x80E
+#define SSB_DEV_MEMC_SDRAM 0x80F
+#define SSB_DEV_EXTIF 0x811
+#define SSB_DEV_80211 0x812
+#define SSB_DEV_MIPS_3302 0x816
+#define SSB_DEV_USB11_HOST 0x817
+#define SSB_DEV_USB11_DEV 0x818
+#define SSB_DEV_USB20_HOST 0x819
+#define SSB_DEV_USB20_DEV 0x81A
+#define SSB_DEV_SDIO_HOST 0x81B
+#define SSB_DEV_ROBOSWITCH 0x81C
+#define SSB_DEV_PARA_ATA 0x81D
+#define SSB_DEV_SATA_XORDMA 0x81E
+#define SSB_DEV_ETHERNET_GBIT 0x81F
+#define SSB_DEV_PCIE 0x820
+#define SSB_DEV_MIMO_PHY 0x821
+#define SSB_DEV_SRAM_CTRLR 0x822
+#define SSB_DEV_MINI_MACPHY 0x823
+#define SSB_DEV_ARM_1176 0x824
+#define SSB_DEV_ARM_7TDMI 0x825
+
+/* Vendor-ID values */
+#define SSB_VENDOR_BROADCOM 0x4243
+
+struct ssb_device_id {
+ u16 vendor;
+ u16 coreid;
+ u8 revision;
+};
+#define SSB_DEVICE(_vendor, _coreid, _revision) \
+ { .vendor = _vendor, .coreid = _coreid, .revision = _revision, }
+#define SSB_DEVTABLE_END \
+ { 0, },
+
+#define SSB_ANY_VENDOR 0xFFFF
+#define SSB_ANY_ID 0xFFFF
+#define SSB_ANY_REV 0xFF
+
+
+struct ssb_device {
+ struct device dev;
+ struct ssb_bus *bus;
+ struct ssb_device_id id;
+
+ u8 core_index;
+ unsigned int irq;
+ void *drvdata; /* Per-device data */
+ void *devtypedata; /* Per-devicetype (eg 802.11) data */
+};
+#define dev_to_ssb_dev(_dev) container_of(_dev, struct ssb_device, dev)
+
+/* Device specific user data */
+static inline
+void ssb_set_drvdata(struct ssb_device *dev, void *data)
+{
+ dev->drvdata = data;
+}
+static inline
+void * ssb_get_drvdata(struct ssb_device *dev)
+{
+ return dev->drvdata;
+}
+
+/* Devicetype specific user data. This is per device-type (not per device) */
+void ssb_set_devtypedata(struct ssb_device *dev, void *data);
+static inline
+void * ssb_get_devtypedata(struct ssb_device *dev)
+{
+ return dev->devtypedata;
+}
+
+struct ssb_bus_ops {
+ u16 (*read16)(struct ssb_device *dev, u16 offset);
+ u32 (*read32)(struct ssb_device *dev, u16 offset);
+ void (*write16)(struct ssb_device *dev, u16 offset, u16 value);
+ void (*write32)(struct ssb_device *dev, u16 offset, u32 value);
+};
+
+
+struct ssb_driver {
+ const char *name;
+ const struct ssb_device_id *id_table;
+
+ int (*probe)(struct ssb_device *dev, const struct ssb_device_id *id);
+ void (*remove)(struct ssb_device *dev);
+ int (*suspend)(struct ssb_device *dev, pm_message_t state);
+ int (*resume)(struct ssb_device *dev);
+ void (*shutdown)(struct ssb_device *dev);
+
+ struct device_driver drv;
+};
+#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
+
+extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
+static inline int ssb_driver_register(struct ssb_driver *drv)
+{
+ return __ssb_driver_register(drv, THIS_MODULE);
+}
+extern void ssb_driver_unregister(struct ssb_driver *drv);
+
+
+
+
+enum ssb_bustype {
+ SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */
+ SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */
+ SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */
+ //TODO SSB_BUSTYPE_JTAG,
+};
+
+/* board_vendor */
+#define SSB_BOARDVENDOR_BCM 0x14E4 /* Broadcom */
+#define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */
+#define SSB_BOARDVENDOR_HP 0x0E11 /* HP */
+/* board_type */
+#define SSB_BOARD_BCM94306MP 0x0418
+#define SSB_BOARD_BCM4309G 0x0421
+#define SSB_BOARD_BCM4306CB 0x0417
+#define SSB_BOARD_BCM4309MP 0x040C
+#define SSB_BOARD_MP4318 0x044A
+#define SSB_BOARD_BU4306 0x0416
+#define SSB_BOARD_BU4309 0x040A
+/* chip_package */
+#define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */
+#define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */
+#define SSB_CHIPPACK_BCM4712L 0 /* Large 340pin 4712 */
+
+#include <linux/ssb/ssb_driver_chipcommon.h>
+#include <linux/ssb/ssb_driver_mips.h>
+#include <linux/ssb/ssb_driver_extif.h>
+#include <linux/ssb/ssb_driver_pci.h>
+
+struct ssb_bus {
+ /* The MMIO area. */
+ void __iomem *mmio;
+
+ const struct ssb_bus_ops *ops;
+
+ /* The core in the basic address register window. (PCI bus only) */
+ struct ssb_device *mapped_device;
+ /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
+ u8 mapped_pcmcia_seg;
+ /* Lock for core and segment switching. */
+ spinlock_t bar_lock;
+
+ /* The bus this backplane is running on. */
+ enum ssb_bustype bustype;
+ /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
+ struct pci_dev *host_pci;
+ /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
+ struct pcmcia_device *host_pcmcia;
+
+ /* ID information about the PCB. */
+ u16 board_vendor;
+ u16 board_type;
+ u16 board_rev;
+ /* ID information about the Chip. */
+ u16 chip_id;
+ u16 chip_rev;
+ u8 chip_package;
+
+ /* Contents of the SPROM.
+ * If there is no sprom (not on PCI-bus), this is emulated. */
+ struct ssb_sprom sprom;
+
+ /* List of devices (cores) on the backplane. */
+ struct ssb_device devices[SSB_MAX_NR_CORES];
+ u8 nr_devices;
+
+ /* Reference count. Number of suspended devices. */
+ u8 suspend_cnt;
+
+ /* Software ID number for this bus. */
+ int busnumber;
+
+ /* The ChipCommon device (if available). */
+ struct ssb_chipcommon chipco;
+ /* The PCI-core device (if available). */
+ struct ssb_pcicore pcicore;
+ /* The MIPS-core device (if available). */
+ struct ssb_mipscore mipscore;
+ /* The EXTif-core device (if available). */
+ struct ssb_extif extif;
+
+ /* Internal. */
+ struct list_head list;
+};
+
+extern int ssb_bus_ssbbus_register(struct ssb_bus *bus,
+ unsigned long baseaddr,
+ void (*fill_sprom)(struct ssb_sprom *sprom));
+#ifdef CONFIG_SSB_PCIHOST
+extern int ssb_bus_pcibus_register(struct ssb_bus *bus,
+ struct pci_dev *host_pci);
+#endif /* CONFIG_SSB_PCIHOST */
+#ifdef CONFIG_SSB_PCMCIAHOST
+extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
+ struct pcmcia_device *pcmcia_dev,
+ unsigned long baseaddr,
+ void (*fill_sprom)(struct ssb_sprom *sprom));
+#endif /* CONFIG_SSB_PCMCIAHOST */
+
+extern void ssb_bus_unregister(struct ssb_bus *bus);
+
+extern u32 ssb_clockspeed(struct ssb_bus *bus);
+
+int ssb_device_is_enabled(struct ssb_device *dev);
+void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags);
+void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags);
+
+
+static inline u16 ssb_read16(struct ssb_device *dev, u16 offset)
+{
+ return dev->bus->ops->read16(dev, offset);
+}
+static inline u32 ssb_read32(struct ssb_device *dev, u16 offset)
+{
+ return dev->bus->ops->read32(dev, offset);
+}
+static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
+{
+ dev->bus->ops->write16(dev, offset, value);
+}
+static inline void ssb_write32(struct ssb_device *dev, u16 offset, u32 value)
+{
+ dev->bus->ops->write32(dev, offset, value);
+}
+
+
+/* Translation (routing) bits that need to be ORed to DMA
+ * addresses before they are given to a device. */
+extern u32 ssb_dma_translation(struct ssb_device *dev);
+#define SSB_DMA_TRANSLATION_MASK 0xC0000000
+#define SSB_DMA_TRANSLATION_SHIFT 30
+
+extern int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask);
+
+
+/* Various helper functions */
+extern u32 ssb_admatch_base(u32 adm);
+extern u32 ssb_admatch_size(u32 adm);
+
+
+#endif /* __KERNEL__ */
+#endif /* LINUX_SSB_H_ */
diff -urN linux.old/include/linux/ssb/ssb_regs.h linux.dev/include/linux/ssb/ssb_regs.h
--- linux.old/include/linux/ssb/ssb_regs.h 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/include/linux/ssb/ssb_regs.h 2007-01-26 00:49:32.000000000 +0100
@@ -0,0 +1,293 @@
+#ifndef LINUX_SSB_REGS_H_
+#define LINUX_SSB_REGS_H_
+#ifdef __KERNEL__
+
+
+/* SiliconBackplane Address Map.
+ * All regions may not exist on all chips.
+ */
+#define SSB_SDRAM_BASE 0x00000000 /* Physical SDRAM */
+#define SSB_PCI_MEM 0x08000000 /* Host Mode sb2pcitranslation0 (64 MB) */
+#define SSB_PCI_CFG 0x0c000000 /* Host Mode sb2pcitranslation1 (64 MB) */
+#define SSB_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */
+#define SSB_ENUM_BASE 0x18000000 /* Enumeration space base */
+#define SSB_ENUM_LIMIT 0x18010000 /* Enumeration space limit */
+
+#define SSB_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */
+#define SSB_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */
+
+#define SSB_EXTIF_BASE 0x1f000000 /* External Interface region base address */
+#define SSB_FLASH1 0x1fc00000 /* Flash Region 1 */
+#define SSB_FLASH1_SZ 0x00400000 /* Size of Flash Region 1 */
+
+#define SSB_PCI_DMA 0x40000000 /* Client Mode sb2pcitranslation2 (1 GB) */
+#define SSB_PCI_DMA_SZ 0x40000000 /* Client Mode sb2pcitranslation2 size in bytes */
+#define SSB_PCIE_DMA_L32 0x00000000 /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), low 32 bits */
+#define SSB_PCIE_DMA_H32 0x80000000 /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), high 32 bits */
+#define SSB_EUART (SB_EXTIF_BASE + 0x00800000)
+#define SSB_LED (SB_EXTIF_BASE + 0x00900000)
+
+
+/* Enumeration space constants */
+#define SSB_CORE_SIZE 0x1000 /* Size of a core MMIO area */
+#define SSB_MAX_NR_CORES ((SSB_ENUM_LIMIT - SSB_ENUM_BASE) / SSB_CORE_SIZE)
+
+
+/* mips address */
+#define SSB_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */
+
+
+/* SSB PCI config space registers. */
+#define SSB_PMCSR 0x44
+#define SSB_PE 0x100
+#define SSB_BAR0_WIN 0x80 /* Backplane address space 0 */
+#define SSB_BAR1_WIN 0x84 /* Backplane address space 1 */
+#define SSB_SPROMCTL 0x88 /* SPROM control */
+#define SSB_SPROMCTL_WE 0x10 /* SPROM write enable */
+#define SSB_BAR1_CONTROL 0x8c /* Address space 1 burst control */
+#define SSB_PCI_IRQS 0x90 /* PCI interrupts */
+#define SSB_PCI_IRQMASK 0x94 /* PCI IRQ control and mask (pcirev >= 6 only) */
+#define SSB_BACKPLANE_IRQS 0x98 /* Backplane Interrupts */
+#define SSB_GPIO_IN 0xB0 /* GPIO Input (pcirev >= 3 only) */
+#define SSB_GPIO_OUT 0xB4 /* GPIO Output (pcirev >= 3 only) */
+#define SSB_GPIO_OUT_ENABLE 0xB8 /* GPIO Output Enable/Disable (pcirev >= 3 only) */
+#define SSB_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */
+#define SSB_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */
+#define SSB_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
+#define SSB_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */
+
+
+#define SSB_BAR0_MAX_RETRIES 50
+
+/* Silicon backplane configuration register definitions */
+#define SSB_IPSFLAG 0x0F08
+#define SSB_IPSFLAG_IRQ1 0x0000003F /* which sbflags get routed to mips interrupt 1 */
+#define SSB_IPSFLAG_IRQ1_SHIFT 0
+#define SSB_IPSFLAG_IRQ2 0x00003F00 /* which sbflags get routed to mips interrupt 2 */
+#define SSB_IPSFLAG_IRQ2_SHIFT 8
+#define SSB_IPSFLAG_IRQ3 0x003F0000 /* which sbflags get routed to mips interrupt 3 */
+#define SSB_IPSFLAG_IRQ3_SHIFT 16
+#define SSB_IPSFLAG_IRQ4 0x3F000000 /* which sbflags get routed to mips interrupt 4 */
+#define SSB_IPSFLAG_IRQ4_SHIFT 24
+#define SSB_TPSFLAG 0x0F18
+#define SSB_TPSFLAG_BPFLAG 0x0000003F /* Backplane flag # */
+#define SSB_TPSFLAG_ALWAYSIRQ 0x00000040 /* IRQ is always sent on the Backplane */
+#define SSB_TMERRLOGA 0x0F48
+#define SSB_TMERRLOG 0x0F50
+#define SSB_ADMATCH3 0x0F60
+#define SSB_ADMATCH2 0x0F68
+#define SSB_ADMATCH1 0x0F70
+#define SSB_IMSTATE 0x0F90 /* SB Initiator Agent State */
+#define SSB_IMSTATE_PC 0x0000000f /* Pipe Count */
+#define SSB_IMSTATE_AP_MASK 0x00000030 /* Arbitration Priority */
+#define SSB_IMSTATE_AP_BOTH 0x00000000 /* Use both timeslices and token */
+#define SSB_IMSTATE_AP_TS 0x00000010 /* Use timeslices only */
+#define SSB_IMSTATE_AP_TK 0x00000020 /* Use token only */
+#define SSB_IMSTATE_AP_RSV 0x00000030 /* Reserved */
+#define SSB_IMSTATE_IBE 0x00020000 /* In Band Error */
+#define SSB_IMSTATE_TO 0x00040000 /* Timeout */
+#define SSB_INTVEC 0x0F94 /* SB Interrupt Mask */
+#define SSB_INTVEC_PCI 0x00000001 /* Enable interrupts for PCI */
+#define SSB_INTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */
+#define SSB_INTVEC_ILINE20 0x00000004 /* Enable interrupts for iline20 */
+#define SSB_INTVEC_CODEC 0x00000008 /* Enable interrupts for v90 codec */
+#define SSB_INTVEC_USB 0x00000010 /* Enable interrupts for usb */
+#define SSB_INTVEC_EXTIF 0x00000020 /* Enable interrupts for external i/f */
+#define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */
+#define SSB_TMSLOW 0x0F98 /* SB Target State Low */
+#define SSB_TMSLOW_RESET 0x00000001 /* Reset */
+#define SSB_TMSLOW_REJECT 0x00000002 /* Reject */
+#define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */
+#define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */
+#define SSB_TMSLOW_PE 0x40000000 /* Power Management Enable */
+#define SSB_TMSLOW_BE 0x80000000 /* BIST Enable */
+#define SSB_TMSHIGH 0x0F9C /* SB Target State High */
+#define SSB_TMSHIGH_SERR 0x00000001 /* S-error */
+#define SSB_TMSHIGH_INT 0x00000002 /* Interrupt */
+#define SSB_TMSHIGH_BUSY 0x00000004 /* Busy */
+#define SSB_TMSHIGH_TO 0x00000020 /* Timeout. Backplane rev >= 2.3 only */
+#define SSB_TMSHIGH_COREFL 0x1FFF0000 /* Core specific flags */
+#define SSB_TMSHIGH_COREFL_SHIFT 16
+#define SSB_TMSHIGH_DMA64 0x10000000 /* 64bit DMA supported */
+#define SSB_TMSHIGH_GCR 0x20000000 /* Gated Clock Request */
+#define SSB_TMSHIGH_BISTF 0x40000000 /* BIST Failed */
+#define SSB_TMSHIGH_BISTD 0x80000000 /* BIST Done */
+#define SSB_BWA0 0x0FA0
+#define SSB_IMCFGLO 0x0FA8
+#define SSB_IMCFGLO_SERTO 0x00000007 /* Service timeout */
+#define SSB_IMCFGLO_REQTO 0x00000070 /* Request timeout */
+#define SSB_IMCFGLO_REQTO_SHIFT 4
+#define SSB_IMCFGLO_CONNID 0x00FF0000 /* Connection ID */
+#define SSB_IMCFGLO_CONNID_SHIFT 16
+#define SSB_IMCFGHI 0x0FAC
+#define SSB_ADMATCH0 0x0FB0
+#define SSB_TMCFGLO 0x0FB8
+#define SSB_TMCFGHI 0x0FBC
+#define SSB_BCONFIG 0x0FC0
+#define SSB_BSTATE 0x0FC8
+#define SSB_ACTCFG 0x0FD8
+#define SSB_FLAGST 0x0FE8
+#define SSB_IDLOW 0x0FF8
+#define SSB_IDLOW_CFGSP 0x00000003 /* Config Space */
+#define SSB_IDLOW_ADDRNGE 0x00000038 /* Address Ranges supported */
+#define SSB_IDLOW_ADDRNGE_SHIFT 3
+#define SSB_IDLOW_SYNC 0x00000040
+#define SSB_IDLOW_INITIATOR 0x00000080
+#define SSB_IDLOW_MIBL 0x00000F00 /* Minimum Backplane latency */
+#define SSB_IDLOW_MIBL_SHIFT 8
+#define SSB_IDLOW_MABL 0x0000F000 /* Maximum Backplane latency */
+#define SSB_IDLOW_MABL_SHIFT 12
+#define SSB_IDLOW_TIF 0x00010000 /* This Initiator is first */
+#define SSB_IDLOW_CCW 0x000C0000 /* Cycle counter width */
+#define SSB_IDLOW_CCW_SHIFT 18
+#define SSB_IDLOW_TPT 0x00F00000 /* Target ports */
+#define SSB_IDLOW_TPT_SHIFT 20
+#define SSB_IDLOW_INITP 0x0F000000 /* Initiator ports */
+#define SSB_IDLOW_INITP_SHIFT 24
+#define SSB_IDLOW_SSBREV 0xF0000000 /* Sonics Backplane Revision code */
+#define SSB_IDLOW_SSBREV_22 0x00000000 /* <= 2.2 */
+#define SSB_IDLOW_SSBREV_23 0x10000000 /* 2.3 */
+#define SSB_IDHIGH 0x0FFC /* SB Identification High */
+#define SSB_IDHIGH_RCLO 0x0000000F /* Revision Code (low part) */
+#define SSB_IDHIGH_CC 0x00008FF0 /* Core Code */
+#define SSB_IDHIGH_CC_SHIFT 4
+#define SSB_IDHIGH_RCHI 0x00007000 /* Revision Code (high part) */
+#define SSB_IDHIGH_RCHI_SHIFT 8 /* yes, shift 8 is right */
+#define SSB_IDHIGH_VC 0xFFFF0000 /* Vendor Code */
+#define SSB_IDHIGH_VC_SHIFT 16
+
+/* SPROM shadow area. If not otherwise noted, fields are
+ * two bytes wide. Note that the SPROM can _only_ be read
+ * in two-byte quantinies.
+ */
+#define SSB_SPROMSIZE_WORDS 64
+#define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16))
+#define SSB_SPROM_BASE 0x1000
+#define SSB_SPROM_REVISION 0x107E
+#define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */
+#define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */
+#define SSB_SPROM_REVISION_CRC_SHIFT 8
+/* SPROM Revision 1 */
+#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */
+#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */
+#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */
+#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */
+#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */
+#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */
+#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */
+#define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
+#define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
+#define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5
+#define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
+#define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
+#define SSB_SPROM1_BINF 0x105C /* Board info */
+#define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */
+#define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */
+#define SSB_SPROM1_BINF_CCODE_SHIFT 8
+#define SSB_SPROM1_BINF_ANTA 0x3000 /* Available A-PHY antennas */
+#define SSB_SPROM1_BINF_ANTA_SHIFT 12
+#define SSB_SPROM1_BINF_ANTBG 0xC000 /* Available B-PHY antennas */
+#define SSB_SPROM1_BINF_ANTBG_SHIFT 14
+#define SSB_SPROM1_PA0B0 0x105E
+#define SSB_SPROM1_PA0B1 0x1060
+#define SSB_SPROM1_PA0B2 0x1062
+#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */
+#define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */
+#define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */
+#define SSB_SPROM1_GPIOA_P1_SHIFT 8
+#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */
+#define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */
+#define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */
+#define SSB_SPROM1_GPIOB_P3_SHIFT 8
+#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */
+#define SSB_SPROM1_MAXPWR_A 0x00FF /* A-PHY (in dBm Q5.2) */
+#define SSB_SPROM1_MAXPWR_BG 0xFF00 /* B-PHY and G-PHY (in dBm Q5.2) */
+#define SSB_SPROM1_MAXPWR_BG_SHIFT 8
+#define SSB_SPROM1_PA1B0 0x106A
+#define SSB_SPROM1_PA1B1 0x106C
+#define SSB_SPROM1_PA1B2 0x106E
+#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */
+#define SSB_SPROM1_ITSSI_A 0x00FF /* A-PHY */
+#define SSB_SPROM1_ITSSI_BG 0xFF00 /* B-PHY and G-PHY */
+#define SSB_SPROM1_ITSSI_BG_SHIFT 8
+#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */
+#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */
+#define SSB_SPROM1_AGAIN_A 0x00FF /* A-PHY */
+#define SSB_SPROM1_AGAIN_BG 0xFF00 /* B-PHY and G-PHY */
+#define SSB_SPROM1_AGAIN_BG_SHIFT 8
+#define SSB_SPROM1_OEM 0x1076 /* 8 bytes OEM string (rev 1 only) */
+/* SPROM Revision 2 (inherits from rev 1) */
+#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */
+#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */
+#define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */
+#define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */
+#define SSB_SPROM2_MAXP_A_LO_SHIFT 8
+#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */
+#define SSB_SPROM2_OPO_VALUE 0x00FF
+#define SSB_SPROM2_OPO_UNUSED 0xFF00
+#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */
+/* SPROM Revision 3 (inherits from rev 2) */
+#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
+#define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */
+#define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8
+#define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */
+#define SSB_SPROM3_GPIOLDC_ON_SHIFT 16
+#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */
+#define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */
+#define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */
+#define SSB_SPROM3_CCKPO_2M_SHIFT 4
+#define SSB_SPROM3_CCKPO_55M 0x0F00 /* 5.5M Rate PO */
+#define SSB_SPROM3_CCKPO_55M_SHIFT 8
+#define SSB_SPROM3_CCKPO_11M 0xF000 /* 11M Rate PO */
+#define SSB_SPROM3_CCKPO_11M_SHIFT 12
+#define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
+
+/* Values for SSB_SPROM1_BINF_CCODE */
+enum {
+ SSB_SPROM1CCODE_WORLD = 0,
+ SSB_SPROM1CCODE_THAILAND,
+ SSB_SPROM1CCODE_ISRAEL,
+ SSB_SPROM1CCODE_JORDAN,
+ SSB_SPROM1CCODE_CHINA,
+ SSB_SPROM1CCODE_JAPAN,
+ SSB_SPROM1CCODE_USA_CANADA_ANZ,
+ SSB_SPROM1CCODE_EUROPE,
+ SSB_SPROM1CCODE_USA_LOW,
+ SSB_SPROM1CCODE_JAPAN_HIGH,
+ SSB_SPROM1CCODE_ALL,
+ SSB_SPROM1CCODE_NONE,
+};
+
+/* Address-Match values and masks (SSB_ADMATCH?) */
+#define SSB_ADM_TYPE 0x00000003 /* Address type */
+#define SSB_ADM_TYPE0 0
+#define SSB_ADM_TYPE1 1
+#define SSB_ADM_TYPE2 2
+#define SSB_ADM_AD64 0x00000004
+#define SSB_ADM_SZ0 0x000000F8 /* Type0 size */
+#define SSB_ADM_SZ0_SHIFT 3
+#define SSB_ADM_SZ1 0x000001F8 /* Type1 size */
+#define SSB_ADM_SZ1_SHIFT 3
+#define SSB_ADM_SZ2 0x000001F8 /* Type2 size */
+#define SSB_ADM_SZ2_SHIFT 3
+#define SSB_ADM_EN 0x00000400 /* Enable */
+#define SSB_ADM_NEG 0x00000800 /* Negative decode */
+#define SSB_ADM_BASE0 0xFFFFFF00 /* Type0 base address */
+#define SSB_ADM_BASE0_SHIFT 8
+#define SSB_ADM_BASE1 0xFFFFF000 /* Type1 base address for the core */
+#define SSB_ADM_BASE1_SHIFT 12
+#define SSB_ADM_BASE2 0xFFFF0000 /* Type2 base address for the core */
+#define SSB_ADM_BASE2_SHIFT 16
+
+
+#endif /* __KERNEL__ */
+#endif /* LINUX_SSB_REGS_H_ */
Reference in New Issue View Git Blame Copy Permalink