openwrt

mr/openwrt

Go to file

John Crispin 87df7da757 ramips: Fix MT7621 pinmux bits for uart3, uart2, mdio The MT7621 uses a 2 bit wide configuration of the sdhci, spi, mdio, pcie, wdt, uart2 and uart3 in the GPIO_MODE register. It was correctly done for sdhci, spi, pcie and wdt, The same has to be done for uart3, uart2 and mdio. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 46645		2015-08-17 06:15:49 +00:00
config	build: disable kernel stack protector support for i386/x86_64	2015-08-02 07:40:12 +00:00
docs	build: Prevent more gzip timestamps	2015-07-14 09:57:45 +00:00
include	brcm63xx: move gzip build command to include/image.mk	2015-08-14 15:10:47 +00:00
package	brcm2708-gpu-fw: update to latest version	2015-08-17 06:04:10 +00:00
scripts	scripts: add tool for generating redboot scripts	2015-07-25 12:12:03 +00:00
target	ramips: Fix MT7621 pinmux bits for uart3, uart2, mdio	2015-08-17 06:15:49 +00:00
toolchain	toolchain: gcc: add gcc 5.2.0	2015-08-16 20:20:36 +00:00
tools	tools: xz: update to version 5.2.1	2015-08-15 11:27:11 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	build: add integration for managing opkg package feed keys	2015-04-06 19:39:51 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	scripts/config: sync with linux upstream	2015-01-08 14:33:53 +00:00
feeds.conf.default	feeds.conf.default: add new targets feed	2015-03-19 11:58:35 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	Makefile: move the cleaning of staging_dir/target* from dirclean to clean	2015-06-14 17:47:16 +00:00
README	Add 'subversion' build dependency to README	2014-08-31 12:06:32 +00:00
rules.mk	toolchain: only use fortify-headers for musl	2015-06-29 06:47:49 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org