openwrt/target/linux/brcm63xx/dts/hg556a-c.dts
dani cea917c30b brcm63xx: fix HG556a C button
One button of the HG556a-C has the wrong GPIO pin defined in the dts file,
fix it

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
2016-07-24 06:38:30 +02:00

126 lines
2.1 KiB
Plaintext

/dts-v1/;
#include "bcm6358.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Huawei EchoLife HG556a (version C)";
compatible = "huawei,hg556a-c", "brcm,bcm6358";
chosen {
bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
debounce-interval = <60>;
help {
label = "help";
gpios = <&gpio1 4 1>;
linux,code = <KEY_HELP>;
};
wlan {
label = "wlan";
gpios = <&gpio0 9 1>;
linux,code = <KEY_WLAN>;
};
restart {
label = "restart";
gpios = <&gpio0 10 1>;
linux,code = <KEY_RESTART>;
};
reset {
label = "reset";
gpios = <&gpio0 11 1>;
linux,code = <KEY_CONFIG>;
};
};
gpio-leds {
compatible = "gpio-leds";
lan1_green {
label = "HW556:green:lan1";
gpios = <&gpio0 0 1>;
};
lan2_green {
label = "HW556:green:lan2";
gpios = <&gpio0 1 1>;
};
dsl_red {
label = "HW556:red:dsl";
gpios = <&gpio0 2 1>;
};
power_red {
label = "HW556:red:power";
gpios = <&gpio0 3 1>;
default-state = "on";
};
message_red {
label = "HW556:red:message";
gpios = <&gpio0 12 1>;
};
lan1_red {
label = "HW556:red:lan1";
gpios = <&gpio0 13 1>;
};
hspa_red {
label = "HW556:red:hspa";
gpios = <&gpio0 15 1>;
};
lan2_red {
label = "HW556:red:lan2";
gpios = <&gpio0 22 1>;
};
lan3_green {
label = "HW556:green:lan3";
gpios = <&gpio0 23 1>;
};
lan3_red {
label = "HW556:red:lan3";
gpios = <&gpio0 26 1>;
};
lan4_green {
label = "HW556:green:lan4";
gpios = <&gpio0 27 1>;
};
lan4_red {
label = "HW556:red:lan4";
gpios = <&gpio0 28 1>;
};
};
};
&pflash {
status = "ok";
linux,part-probe = "bcm63xxpart";
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
read-only;
};
linux@20000 {
label = "linux";
reg = <0x020000 0xec0000>;
};
cal_data@ee0000 {
label = "cal_data";
reg = <0xee0000 0x100000>;
read-only;
};
nvram@fe0000 {
label = "nvram";
reg = <0xfe0000 0x020000>;
};
};