mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
9cf1d4e06e
openwrt/target/linux/ramips/files/arch/mips/ralink/rt305x
History
Gabor Juhos 9cf1d4e06e ramips: scripts updates 
In this patch:

* rename Argus leds to avoid underscores
* rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235
* remove Belkin F5D8235 v1 status led defined as storage led (it was
  defined as usb led earlier, just in wrong place) - it should have
  router led as in v2
* add Argus, Sparklan and Belkin F5D8235 v2 status leds
* add Belkin F5D8235 v1 and v2 usb leds
* fix Belkin F5D8235 v2 network config generation and mac address axtraction
* fix Sparklan board identification
* add Sparklan usb led (this board doesn't have usb connector by
  default and the led is hidden also but if you are going to solder
  the connector then you'll see the led too)
* add Sparklan network config generation and mac address extraction
* fix empty string test in network script and...
* ...sort case entries by the first board in the list

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29871
2012-01-23 10:23:32 +00:00
..
clock.c ramips: implement clock API for RT305X 2011-01-26 20:48:35 +00:00
common.h ramips: implement clock API for RT305X 2011-01-26 20:48:35 +00:00
devices.c ramips: initial support for Sitecom WL-351 v1 002 2011-12-23 14:27:16 +00:00
devices.h ramips: rt305x: add dwc_otg platform device 2011-08-15 14:11:51 +00:00
early_printk.c
irq.c ramips: set cp0_perfcount_irq for RT305X 2011-07-03 15:01:40 +00:00
Kconfig ramips: rt305x: add support for the ALFA Networks W502U (R36) board 2011-12-28 08:43:32 +00:00
mach-argus-atp52b.c ramips: scripts updates 2012-01-23 10:23:32 +00:00
mach-bc2.c ramips: Support for NexAira BC2 2011-10-24 21:49:36 +00:00
mach-dir-300-revb.c ramips: allow to specify port layout for the switch of the RT305x/RT3350 2011-08-15 14:11:43 +00:00
mach-esr-9753.c ramips: add support for the Senao/EnGenius ESR-9753 board 2011-12-23 14:27:10 +00:00
mach-f5d8235-v2.c ramips: register usb on Belkin F5D8235 v2 and Argus ATP-52-B routers 2011-08-19 15:55:08 +00:00
mach-fonera20n.c ramips: rt305x: register the dwc_otg device on the relevant boards 2011-08-15 14:11:52 +00:00
mach-hw550-3g.c ramips: fix switch-port assignment for HW550-3G 2011-10-24 21:49:32 +00:00
mach-mofi3500-3gn.c ramips: rt305x: register the dwc_otg device on the relevant boards 2011-08-15 14:11:52 +00:00
mach-nbg-419n.c ramips: rt305x: add support for the ZyXEL NBG-419N board 2011-08-22 20:41:49 +00:00
mach-nw718.c ramips: rt305x: remove unused defines from mach-nw718.c 2011-08-22 20:41:48 +00:00
mach-omni-emb.c ramips: define firmware partition for Omnima MiniEMBWiFi 2011-12-23 14:27:05 +00:00
mach-pwh2004.c ramips: allow to specify port layout for the switch of the RT305x/RT3350 2011-08-15 14:11:43 +00:00
mach-rt-g32-revb.c ramips: allow to specify port layout for the switch of the RT305x/RT3350 2011-08-15 14:11:43 +00:00
mach-v22rw-2x2.c ramips: rt305x: register the dwc_otg device on the relevant boards 2011-08-15 14:11:52 +00:00
mach-w502u.c ramips: rt305x: add support for the ALFA Networks W502U (R36) board 2011-12-28 08:43:32 +00:00
mach-wcr150gn.c ramips: Sparklan wcr-150gn board fixes 2011-12-01 22:48:41 +00:00
mach-whr-g300n.c ramips: allow to specify port layout for the switch of the RT305x/RT3350 2011-08-15 14:11:43 +00:00
mach-wl351.c ramips: initial support for Sitecom WL-351 v1 002 2011-12-23 14:27:16 +00:00
mach-wr512-3gn.c ramips: rt305x: support for wr512-3gn-like routers 2011-08-19 15:55:10 +00:00
Makefile ramips: rt305x: add support for the ALFA Networks W502U (R36) board 2011-12-28 08:43:32 +00:00
rt305x.c ramips: define GPIO chips separately for each SoCs 2011-03-27 19:19:59 +00:00
setup.c ramips: implement clock API for RT305X 2011-01-26 20:48:35 +00:00