cd43416a78
Add upstream patches needed for PCIe through a switch. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 38511
107 lines
4.4 KiB
Diff
107 lines
4.4 KiB
Diff
From 93d2b52fe73294d59bbce3a6d4da031647b1f3b2 Mon Sep 17 00:00:00 2001
|
|
From: Tim Harvey <tharvey@gateworks.com>
|
|
Date: Tue, 22 Oct 2013 15:56:40 -0700
|
|
Subject: [PATCH] PCI: imx6: remove outbound io/mem ATU region mapping
|
|
|
|
The IMX6 iATU is used for address translation between the AXI bus
|
|
address space and PCI address space. This is used for type0 and type1
|
|
config cycles but is not necessary for outbound io/mem regions.
|
|
|
|
This patch removes the calls that inappropriately re-configures the ATU
|
|
viewport for outbound memory and IO after config cycles and removes them
|
|
altogether as they are not necessary.
|
|
|
|
This resolves issues with PCI devices behind switches and has been tested with
|
|
a Gige device behind a PLX PEX860x switch.
|
|
|
|
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
|
---
|
|
drivers/pci/host/pcie-designware.c | 41 +++---------------------------------
|
|
1 file changed, 3 insertions(+), 38 deletions(-)
|
|
|
|
--- a/drivers/pci/host/pcie-designware.c
|
|
+++ b/drivers/pci/host/pcie-designware.c
|
|
@@ -43,7 +43,6 @@
|
|
#define PCIE_ATU_VIEWPORT 0x900
|
|
#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
|
|
#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
|
|
-#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
|
|
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
|
|
#define PCIE_ATU_CR1 0x904
|
|
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
|
|
@@ -264,8 +263,8 @@ static void dw_pcie_prog_viewport_cfg0(s
|
|
|
|
static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev)
|
|
{
|
|
- /* Program viewport 1 : OUTBOUND : CFG1 */
|
|
- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
|
|
+ /* Program viewport 0 : OUTBOUND : CFG1 */
|
|
+ dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
|
|
PCIE_ATU_VIEWPORT);
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
|
|
@@ -275,38 +274,8 @@ static void dw_pcie_prog_viewport_cfg1(s
|
|
PCIE_ATU_LIMIT);
|
|
dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
|
|
dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
|
|
-}
|
|
-
|
|
-static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
|
|
-{
|
|
- /* Program viewport 0 : OUTBOUND : MEM */
|
|
- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
|
|
- PCIE_ATU_VIEWPORT);
|
|
- dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1);
|
|
- dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
|
|
- dw_pcie_writel_rc(pp, pp->mem_base, PCIE_ATU_LOWER_BASE);
|
|
- dw_pcie_writel_rc(pp, (pp->mem_base >> 32), PCIE_ATU_UPPER_BASE);
|
|
- dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1,
|
|
- PCIE_ATU_LIMIT);
|
|
- dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET);
|
|
- dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr),
|
|
- PCIE_ATU_UPPER_TARGET);
|
|
-}
|
|
-
|
|
-static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
|
|
-{
|
|
- /* Program viewport 1 : OUTBOUND : IO */
|
|
- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
|
|
- PCIE_ATU_VIEWPORT);
|
|
- dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1);
|
|
+ dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
|
|
- dw_pcie_writel_rc(pp, pp->io_base, PCIE_ATU_LOWER_BASE);
|
|
- dw_pcie_writel_rc(pp, (pp->io_base >> 32), PCIE_ATU_UPPER_BASE);
|
|
- dw_pcie_writel_rc(pp, pp->io_base + pp->config.io_size - 1,
|
|
- PCIE_ATU_LIMIT);
|
|
- dw_pcie_writel_rc(pp, pp->config.io_bus_addr, PCIE_ATU_LOWER_TARGET);
|
|
- dw_pcie_writel_rc(pp, upper_32_bits(pp->config.io_bus_addr),
|
|
- PCIE_ATU_UPPER_TARGET);
|
|
}
|
|
|
|
static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
|
|
@@ -322,11 +291,9 @@ static int dw_pcie_rd_other_conf(struct
|
|
if (bus->parent->number == pp->root_bus_nr) {
|
|
dw_pcie_prog_viewport_cfg0(pp, busdev);
|
|
ret = cfg_read(pp->va_cfg0_base + address, where, size, val);
|
|
- dw_pcie_prog_viewport_mem_outbound(pp);
|
|
} else {
|
|
dw_pcie_prog_viewport_cfg1(pp, busdev);
|
|
ret = cfg_read(pp->va_cfg1_base + address, where, size, val);
|
|
- dw_pcie_prog_viewport_io_outbound(pp);
|
|
}
|
|
|
|
return ret;
|
|
@@ -345,11 +312,9 @@ static int dw_pcie_wr_other_conf(struct
|
|
if (bus->parent->number == pp->root_bus_nr) {
|
|
dw_pcie_prog_viewport_cfg0(pp, busdev);
|
|
ret = cfg_write(pp->va_cfg0_base + address, where, size, val);
|
|
- dw_pcie_prog_viewport_mem_outbound(pp);
|
|
} else {
|
|
dw_pcie_prog_viewport_cfg1(pp, busdev);
|
|
ret = cfg_write(pp->va_cfg1_base + address, where, size, val);
|
|
- dw_pcie_prog_viewport_io_outbound(pp);
|
|
}
|
|
|
|
return ret;
|