d4db00205d
Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36161
560 lines
12 KiB
C
560 lines
12 KiB
C
/*
|
|
* ramips_spi.c -- Ralink RT288x/RT305x SPI controller driver
|
|
*
|
|
* Copyright (C) 2011 Sergiy <piratfm@gmail.com>
|
|
* Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#define DRIVER_NAME "ramips-spi"
|
|
#define RALINK_NUM_CHIPSELECTS 1 /* only one slave is supported*/
|
|
#define RALINK_SPI_WAIT_RDY_MAX_LOOP 2000 /* in usec */
|
|
|
|
#define RAMIPS_SPI_STAT 0x00
|
|
#define RAMIPS_SPI_CFG 0x10
|
|
#define RAMIPS_SPI_CTL 0x14
|
|
#define RAMIPS_SPI_DATA 0x20
|
|
|
|
/* SPISTAT register bit field */
|
|
#define SPISTAT_BUSY BIT(0)
|
|
|
|
/* SPICFG register bit field */
|
|
#define SPICFG_LSBFIRST 0
|
|
#define SPICFG_MSBFIRST BIT(8)
|
|
#define SPICFG_SPICLKPOL BIT(6)
|
|
#define SPICFG_RXCLKEDGE_FALLING BIT(5)
|
|
#define SPICFG_TXCLKEDGE_FALLING BIT(4)
|
|
#define SPICFG_SPICLK_PRESCALE_MASK 0x7
|
|
#define SPICFG_SPICLK_DIV2 0
|
|
#define SPICFG_SPICLK_DIV4 1
|
|
#define SPICFG_SPICLK_DIV8 2
|
|
#define SPICFG_SPICLK_DIV16 3
|
|
#define SPICFG_SPICLK_DIV32 4
|
|
#define SPICFG_SPICLK_DIV64 5
|
|
#define SPICFG_SPICLK_DIV128 6
|
|
#define SPICFG_SPICLK_DISABLE 7
|
|
|
|
/* SPICTL register bit field */
|
|
#define SPICTL_HIZSDO BIT(3)
|
|
#define SPICTL_STARTWR BIT(2)
|
|
#define SPICTL_STARTRD BIT(1)
|
|
#define SPICTL_SPIENA BIT(0)
|
|
|
|
#ifdef DEBUG
|
|
#define spi_debug(args...) printk(args)
|
|
#else
|
|
#define spi_debug(args...)
|
|
#endif
|
|
|
|
struct ramips_spi {
|
|
struct work_struct work;
|
|
|
|
/* Lock access to transfer list.*/
|
|
spinlock_t lock;
|
|
|
|
struct list_head msg_queue;
|
|
struct spi_master *master;
|
|
void __iomem *base;
|
|
unsigned int sys_freq;
|
|
unsigned int speed;
|
|
|
|
struct clk *clk;
|
|
};
|
|
|
|
static struct workqueue_struct *ramips_spi_wq;
|
|
|
|
static inline struct ramips_spi *ramips_spidev_to_rs(struct spi_device *spi)
|
|
{
|
|
return spi_master_get_devdata(spi->master);
|
|
}
|
|
|
|
static inline u32 ramips_spi_read(struct ramips_spi *rs, u32 reg)
|
|
{
|
|
return ioread32(rs->base + reg);
|
|
}
|
|
|
|
static inline void ramips_spi_write(struct ramips_spi *rs, u32 reg, u32 val)
|
|
{
|
|
iowrite32(val, rs->base + reg);
|
|
}
|
|
|
|
static inline void ramips_spi_setbits(struct ramips_spi *rs, u32 reg, u32 mask)
|
|
{
|
|
void __iomem *addr = rs->base + reg;
|
|
u32 val;
|
|
|
|
val = ioread32(addr);
|
|
val |= mask;
|
|
iowrite32(val, addr);
|
|
}
|
|
|
|
static inline void ramips_spi_clrbits(struct ramips_spi *rs, u32 reg, u32 mask)
|
|
{
|
|
void __iomem *addr = rs->base + reg;
|
|
u32 val;
|
|
|
|
val = ioread32(addr);
|
|
val &= ~mask;
|
|
iowrite32(val, addr);
|
|
}
|
|
|
|
static int ramips_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
|
|
{
|
|
struct ramips_spi *rs = ramips_spidev_to_rs(spi);
|
|
u32 rate;
|
|
u32 prescale;
|
|
u32 reg;
|
|
|
|
spi_debug("%s: speed:%u\n", __func__, speed);
|
|
|
|
/*
|
|
* the supported rates are: 2,4,8...128
|
|
* round up as we look for equal or less speed
|
|
*/
|
|
rate = DIV_ROUND_UP(rs->sys_freq, speed);
|
|
spi_debug("%s: rate-1:%u\n", __func__, rate);
|
|
rate = roundup_pow_of_two(rate);
|
|
spi_debug("%s: rate-2:%u\n", __func__, rate);
|
|
|
|
/* check if requested speed is too small */
|
|
if (rate > 128)
|
|
return -EINVAL;
|
|
|
|
if (rate < 2)
|
|
rate = 2;
|
|
|
|
/* Convert the rate to SPI clock divisor value. */
|
|
prescale = ilog2(rate/2);
|
|
spi_debug("%s: prescale:%u\n", __func__, prescale);
|
|
|
|
reg = ramips_spi_read(rs, RAMIPS_SPI_CFG);
|
|
reg = ((reg & ~SPICFG_SPICLK_PRESCALE_MASK) | prescale);
|
|
ramips_spi_write(rs, RAMIPS_SPI_CFG, reg);
|
|
rs->speed = speed;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* called only when no transfer is active on the bus
|
|
*/
|
|
static int
|
|
ramips_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
|
|
{
|
|
struct ramips_spi *rs = ramips_spidev_to_rs(spi);
|
|
unsigned int speed = spi->max_speed_hz;
|
|
int rc;
|
|
unsigned int bits_per_word = 8;
|
|
|
|
if ((t != NULL) && t->speed_hz)
|
|
speed = t->speed_hz;
|
|
|
|
if ((t != NULL) && t->bits_per_word)
|
|
bits_per_word = t->bits_per_word;
|
|
|
|
if (rs->speed != speed) {
|
|
spi_debug("%s: speed_hz:%u\n", __func__, speed);
|
|
rc = ramips_spi_baudrate_set(spi, speed);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
if (bits_per_word != 8) {
|
|
spi_debug("%s: bad bits_per_word: %u\n", __func__,
|
|
bits_per_word);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ramips_spi_set_cs(struct ramips_spi *rs, int enable)
|
|
{
|
|
if (enable)
|
|
ramips_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
|
|
else
|
|
ramips_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
|
|
}
|
|
|
|
static inline int ramips_spi_wait_till_ready(struct ramips_spi *rs)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < RALINK_SPI_WAIT_RDY_MAX_LOOP; i++) {
|
|
u32 status;
|
|
|
|
status = ramips_spi_read(rs, RAMIPS_SPI_STAT);
|
|
if ((status & SPISTAT_BUSY) == 0)
|
|
return 0;
|
|
|
|
udelay(1);
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static unsigned int
|
|
ramips_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
|
|
{
|
|
struct ramips_spi *rs = ramips_spidev_to_rs(spi);
|
|
unsigned count = 0;
|
|
u8 *rx = xfer->rx_buf;
|
|
const u8 *tx = xfer->tx_buf;
|
|
int err;
|
|
|
|
spi_debug("%s(%d): %s %s\n", __func__, xfer->len,
|
|
(tx != NULL) ? "tx" : " ",
|
|
(rx != NULL) ? "rx" : " ");
|
|
|
|
if (tx) {
|
|
for (count = 0; count < xfer->len; count++) {
|
|
ramips_spi_write(rs, RAMIPS_SPI_DATA, tx[count]);
|
|
ramips_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
|
|
err = ramips_spi_wait_till_ready(rs);
|
|
if (err) {
|
|
dev_err(&spi->dev, "TX failed, err=%d\n", err);
|
|
goto out;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (rx) {
|
|
for (count = 0; count < xfer->len; count++) {
|
|
ramips_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
|
|
err = ramips_spi_wait_till_ready(rs);
|
|
if (err) {
|
|
dev_err(&spi->dev, "RX failed, err=%d\n", err);
|
|
goto out;
|
|
}
|
|
rx[count] = (u8) ramips_spi_read(rs, RAMIPS_SPI_DATA);
|
|
}
|
|
}
|
|
|
|
out:
|
|
return count;
|
|
}
|
|
|
|
static void ramips_spi_work(struct work_struct *work)
|
|
{
|
|
struct ramips_spi *rs =
|
|
container_of(work, struct ramips_spi, work);
|
|
|
|
spin_lock_irq(&rs->lock);
|
|
while (!list_empty(&rs->msg_queue)) {
|
|
struct spi_message *m;
|
|
struct spi_device *spi;
|
|
struct spi_transfer *t = NULL;
|
|
int par_override = 0;
|
|
int status = 0;
|
|
int cs_active = 0;
|
|
|
|
m = container_of(rs->msg_queue.next, struct spi_message,
|
|
queue);
|
|
|
|
list_del_init(&m->queue);
|
|
spin_unlock_irq(&rs->lock);
|
|
|
|
spi = m->spi;
|
|
|
|
/* Load defaults */
|
|
status = ramips_spi_setup_transfer(spi, NULL);
|
|
|
|
if (status < 0)
|
|
goto msg_done;
|
|
|
|
list_for_each_entry(t, &m->transfers, transfer_list) {
|
|
if (par_override || t->speed_hz || t->bits_per_word) {
|
|
par_override = 1;
|
|
status = ramips_spi_setup_transfer(spi, t);
|
|
if (status < 0)
|
|
break;
|
|
if (!t->speed_hz && !t->bits_per_word)
|
|
par_override = 0;
|
|
}
|
|
|
|
if (!cs_active) {
|
|
ramips_spi_set_cs(rs, 1);
|
|
cs_active = 1;
|
|
}
|
|
|
|
if (t->len)
|
|
m->actual_length +=
|
|
ramips_spi_write_read(spi, t);
|
|
|
|
if (t->delay_usecs)
|
|
udelay(t->delay_usecs);
|
|
|
|
if (t->cs_change) {
|
|
ramips_spi_set_cs(rs, 0);
|
|
cs_active = 0;
|
|
}
|
|
}
|
|
|
|
msg_done:
|
|
if (cs_active)
|
|
ramips_spi_set_cs(rs, 0);
|
|
|
|
m->status = status;
|
|
m->complete(m->context);
|
|
|
|
spin_lock_irq(&rs->lock);
|
|
}
|
|
|
|
spin_unlock_irq(&rs->lock);
|
|
}
|
|
|
|
static int ramips_spi_setup(struct spi_device *spi)
|
|
{
|
|
struct ramips_spi *rs = ramips_spidev_to_rs(spi);
|
|
|
|
if ((spi->max_speed_hz == 0) ||
|
|
(spi->max_speed_hz > (rs->sys_freq / 2)))
|
|
spi->max_speed_hz = (rs->sys_freq / 2);
|
|
|
|
if (spi->max_speed_hz < (rs->sys_freq/128)) {
|
|
dev_err(&spi->dev, "setup: requested speed too low %d Hz\n",
|
|
spi->max_speed_hz);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (spi->bits_per_word != 0 && spi->bits_per_word != 8) {
|
|
dev_err(&spi->dev,
|
|
"setup: requested bits per words - os wrong %d bpw\n",
|
|
spi->bits_per_word);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (spi->bits_per_word == 0)
|
|
spi->bits_per_word = 8;
|
|
|
|
/*
|
|
* baudrate & width will be set ramips_spi_setup_transfer
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
static int ramips_spi_transfer(struct spi_device *spi, struct spi_message *m)
|
|
{
|
|
struct ramips_spi *rs;
|
|
struct spi_transfer *t = NULL;
|
|
unsigned long flags;
|
|
|
|
m->actual_length = 0;
|
|
m->status = 0;
|
|
|
|
/* reject invalid messages and transfers */
|
|
if (list_empty(&m->transfers) || !m->complete)
|
|
return -EINVAL;
|
|
|
|
rs = ramips_spidev_to_rs(spi);
|
|
|
|
list_for_each_entry(t, &m->transfers, transfer_list) {
|
|
unsigned int bits_per_word = spi->bits_per_word;
|
|
|
|
if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) {
|
|
dev_err(&spi->dev,
|
|
"message rejected : "
|
|
"invalid transfer data buffers\n");
|
|
goto msg_rejected;
|
|
}
|
|
|
|
if (t->bits_per_word)
|
|
bits_per_word = t->bits_per_word;
|
|
|
|
if (bits_per_word != 8) {
|
|
dev_err(&spi->dev,
|
|
"message rejected : "
|
|
"invalid transfer bits_per_word (%d bits)\n",
|
|
bits_per_word);
|
|
goto msg_rejected;
|
|
}
|
|
|
|
if (t->speed_hz && t->speed_hz < (rs->sys_freq/128)) {
|
|
dev_err(&spi->dev,
|
|
"message rejected : "
|
|
"device min speed (%d Hz) exceeds "
|
|
"required transfer speed (%d Hz)\n",
|
|
(rs->sys_freq/128), t->speed_hz);
|
|
goto msg_rejected;
|
|
}
|
|
}
|
|
|
|
|
|
spin_lock_irqsave(&rs->lock, flags);
|
|
list_add_tail(&m->queue, &rs->msg_queue);
|
|
queue_work(ramips_spi_wq, &rs->work);
|
|
spin_unlock_irqrestore(&rs->lock, flags);
|
|
|
|
return 0;
|
|
msg_rejected:
|
|
/* Message rejected and not queued */
|
|
m->status = -EINVAL;
|
|
if (m->complete)
|
|
m->complete(m->context);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void __init ramips_spi_reset(struct ramips_spi *rs)
|
|
{
|
|
ramips_spi_write(rs, RAMIPS_SPI_CFG,
|
|
SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING |
|
|
SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL);
|
|
ramips_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA);
|
|
}
|
|
|
|
static int __init ramips_spi_probe(struct platform_device *pdev)
|
|
{
|
|
struct spi_master *master;
|
|
struct ramips_spi *rs;
|
|
struct resource *r;
|
|
int status = 0;
|
|
|
|
master = spi_alloc_master(&pdev->dev, sizeof(*rs));
|
|
if (master == NULL) {
|
|
dev_dbg(&pdev->dev, "master allocation failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (pdev->id != -1)
|
|
master->bus_num = pdev->id;
|
|
|
|
/* we support only mode 0, and no options */
|
|
master->mode_bits = 0;
|
|
|
|
master->setup = ramips_spi_setup;
|
|
master->transfer = ramips_spi_transfer;
|
|
master->num_chipselect = RALINK_NUM_CHIPSELECTS;
|
|
|
|
dev_set_drvdata(&pdev->dev, master);
|
|
|
|
rs = spi_master_get_devdata(master);
|
|
rs->master = master;
|
|
|
|
rs->clk = clk_get(NULL, "sys");
|
|
if (IS_ERR(rs->clk)) {
|
|
status = PTR_ERR(rs->clk);
|
|
dev_err(&pdev->dev, "unable to get SYS clock, err=%d\n",
|
|
status);
|
|
goto out_put_master;
|
|
}
|
|
|
|
status = clk_enable(rs->clk);
|
|
if (status)
|
|
goto out_put_clk;
|
|
|
|
rs->sys_freq = clk_get_rate(rs->clk);
|
|
spi_debug("%s: sys_freq: %ld\n", __func__, rs->sys_freq);
|
|
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (r == NULL) {
|
|
status = -ENODEV;
|
|
goto out_disable_clk;
|
|
}
|
|
|
|
if (!request_mem_region(r->start, (r->end - r->start) + 1,
|
|
dev_name(&pdev->dev))) {
|
|
status = -EBUSY;
|
|
goto out_disable_clk;
|
|
}
|
|
|
|
rs->base = ioremap(r->start, resource_size(r));
|
|
if (rs->base == NULL) {
|
|
dev_err(&pdev->dev, "ioremap failed\n");
|
|
status = -ENOMEM;
|
|
goto out_rel_mem;
|
|
}
|
|
|
|
INIT_WORK(&rs->work, ramips_spi_work);
|
|
|
|
spin_lock_init(&rs->lock);
|
|
INIT_LIST_HEAD(&rs->msg_queue);
|
|
|
|
ramips_spi_reset(rs);
|
|
|
|
status = spi_register_master(master);
|
|
if (status)
|
|
goto out_unmap_base;
|
|
|
|
return 0;
|
|
|
|
out_unmap_base:
|
|
iounmap(rs->base);
|
|
out_rel_mem:
|
|
release_mem_region(r->start, (r->end - r->start) + 1);
|
|
out_disable_clk:
|
|
clk_disable(rs->clk);
|
|
out_put_clk:
|
|
clk_put(rs->clk);
|
|
out_put_master:
|
|
spi_master_put(master);
|
|
return status;
|
|
}
|
|
|
|
static int ramips_spi_remove(struct platform_device *pdev)
|
|
{
|
|
struct spi_master *master;
|
|
struct ramips_spi *rs;
|
|
struct resource *r;
|
|
|
|
master = dev_get_drvdata(&pdev->dev);
|
|
rs = spi_master_get_devdata(master);
|
|
|
|
cancel_work_sync(&rs->work);
|
|
|
|
iounmap(rs->base);
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
release_mem_region(r->start, (r->end - r->start) + 1);
|
|
|
|
clk_disable(rs->clk);
|
|
clk_put(rs->clk);
|
|
spi_unregister_master(master);
|
|
|
|
return 0;
|
|
}
|
|
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|
|
|
|
static struct platform_driver ramips_spi_driver = {
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.remove = ramips_spi_remove,
|
|
};
|
|
|
|
static int __init ramips_spi_init(void)
|
|
{
|
|
ramips_spi_wq = create_singlethread_workqueue(
|
|
ramips_spi_driver.driver.name);
|
|
if (ramips_spi_wq == NULL)
|
|
return -ENOMEM;
|
|
|
|
return platform_driver_probe(&ramips_spi_driver, ramips_spi_probe);
|
|
}
|
|
module_init(ramips_spi_init);
|
|
|
|
static void __exit ramips_spi_exit(void)
|
|
{
|
|
flush_workqueue(ramips_spi_wq);
|
|
platform_driver_unregister(&ramips_spi_driver);
|
|
|
|
destroy_workqueue(ramips_spi_wq);
|
|
}
|
|
module_exit(ramips_spi_exit);
|
|
|
|
MODULE_DESCRIPTION("Ralink SPI driver");
|
|
MODULE_AUTHOR("Sergiy <piratfm@gmail.com>");
|
|
MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
|
|
MODULE_LICENSE("GPL");
|