102cb4742c
Refresh patches on all 4.4 supported platforms. 077-0005-bgmac-stop-clearing-DMA-receive-control-register-rig.patch removed as now upstream. Compile & run tested: ar71xx - Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
246 lines
6.6 KiB
Diff
246 lines
6.6 KiB
Diff
From 5b40516b2f5fb9b2a7d6d3e2e924f12ec9d183a8 Mon Sep 17 00:00:00 2001
|
|
From: Mathieu Olivari <mathieu@codeaurora.org>
|
|
Date: Tue, 21 Apr 2015 19:01:42 -0700
|
|
Subject: [PATCH 8/9] ARM: dts: qcom: add pcie nodes to ipq806x platforms
|
|
|
|
qcom-pcie driver now supports version 0 of the controller. This change
|
|
adds the corresponding entries to the IPQ806x dtsi file and
|
|
corresponding platform (AP148).
|
|
|
|
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
|
|
---
|
|
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 30 ++++++++
|
|
arch/arm/boot/dts/qcom-ipq8064.dtsi | 124 +++++++++++++++++++++++++++++++
|
|
2 files changed, 154 insertions(+)
|
|
|
|
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
|
@@ -116,5 +116,15 @@
|
|
usb30@1 {
|
|
status = "ok";
|
|
};
|
|
+
|
|
+ pcie0: pci@1b500000 {
|
|
+ status = "ok";
|
|
+ phy-tx0-term-offset = <7>;
|
|
+ };
|
|
+
|
|
+ pcie1: pci@1b700000 {
|
|
+ status = "ok";
|
|
+ phy-tx0-term-offset = <7>;
|
|
+ };
|
|
};
|
|
};
|
|
--- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
|
|
@@ -128,5 +128,17 @@
|
|
usb30@1 {
|
|
status = "ok";
|
|
};
|
|
+
|
|
+ pcie0: pci@1b500000 {
|
|
+ status = "ok";
|
|
+ };
|
|
+
|
|
+ pcie1: pci@1b700000 {
|
|
+ status = "ok";
|
|
+ };
|
|
+
|
|
+ pcie2: pci@1b900000 {
|
|
+ status = "ok";
|
|
+ };
|
|
};
|
|
};
|
|
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
|
@@ -4,6 +4,9 @@
|
|
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
|
|
#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
|
|
#include <dt-bindings/soc/qcom,gsbi.h>
|
|
+#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
|
|
+#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
model = "Qualcomm IPQ8064";
|
|
@@ -99,6 +102,34 @@
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0 16 0x4>;
|
|
+
|
|
+ pcie0_pins: pcie0_pinmux {
|
|
+ mux {
|
|
+ pins = "gpio3";
|
|
+ function = "pcie1_rst";
|
|
+ drive-strength = <2>;
|
|
+ bias-disable;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ pcie1_pins: pcie1_pinmux {
|
|
+ mux {
|
|
+ pins = "gpio48";
|
|
+ function = "pcie2_rst";
|
|
+ drive-strength = <2>;
|
|
+ bias-disable;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ pcie2_pins: pcie2_pinmux {
|
|
+ mux {
|
|
+ pins = "gpio63";
|
|
+ function = "pcie3_rst";
|
|
+ drive-strength = <2>;
|
|
+ bias-disable;
|
|
+ output-low;
|
|
+ };
|
|
+ };
|
|
};
|
|
|
|
intc: interrupt-controller@2000000 {
|
|
@@ -415,6 +446,144 @@
|
|
dr_mode = "host";
|
|
};
|
|
};
|
|
+
|
|
+ pcie0: pci@1b500000 {
|
|
+ compatible = "qcom,pcie-v0";
|
|
+ reg = <0x1b500000 0x1000
|
|
+ 0x1b502000 0x80
|
|
+ 0x1b600000 0x100
|
|
+ 0x0ff00000 0x100000>;
|
|
+ reg-names = "dbi", "elbi", "parf", "config";
|
|
+ device_type = "pci";
|
|
+ linux,pci-domain = <0>;
|
|
+ bus-range = <0x00 0xff>;
|
|
+ num-lanes = <1>;
|
|
+ #address-cells = <3>;
|
|
+ #size-cells = <2>;
|
|
+
|
|
+ ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */
|
|
+ 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
|
|
+
|
|
+ interrupts = <GIC_SPI 35 IRQ_TYPE_NONE>;
|
|
+ interrupt-names = "msi";
|
|
+ #interrupt-cells = <1>;
|
|
+ interrupt-map-mask = <0 0 0 0x7>;
|
|
+ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
|
+ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
|
+ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
|
+ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
|
+
|
|
+ clocks = <&gcc PCIE_A_CLK>,
|
|
+ <&gcc PCIE_H_CLK>,
|
|
+ <&gcc PCIE_PHY_CLK>;
|
|
+ clock-names = "core", "iface", "phy";
|
|
+
|
|
+ resets = <&gcc PCIE_ACLK_RESET>,
|
|
+ <&gcc PCIE_HCLK_RESET>,
|
|
+ <&gcc PCIE_POR_RESET>,
|
|
+ <&gcc PCIE_PCI_RESET>,
|
|
+ <&gcc PCIE_PHY_RESET>;
|
|
+ reset-names = "axi", "ahb", "por", "pci", "phy";
|
|
+
|
|
+ pinctrl-0 = <&pcie0_pins>;
|
|
+ pinctrl-names = "default";
|
|
+
|
|
+ perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
|
|
+
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ pcie1: pci@1b700000 {
|
|
+ compatible = "qcom,pcie-v0";
|
|
+ reg = <0x1b700000 0x1000
|
|
+ 0x1b702000 0x80
|
|
+ 0x1b800000 0x100
|
|
+ 0x31f00000 0x100000>;
|
|
+ reg-names = "dbi", "elbi", "parf", "config";
|
|
+ device_type = "pci";
|
|
+ linux,pci-domain = <1>;
|
|
+ bus-range = <0x00 0xff>;
|
|
+ num-lanes = <1>;
|
|
+ #address-cells = <3>;
|
|
+ #size-cells = <2>;
|
|
+
|
|
+ ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */
|
|
+ 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
|
|
+
|
|
+ interrupts = <GIC_SPI 57 IRQ_TYPE_NONE>;
|
|
+ interrupt-names = "msi";
|
|
+ #interrupt-cells = <1>;
|
|
+ interrupt-map-mask = <0 0 0 0x7>;
|
|
+ interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
|
+ <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
|
+ <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
|
+ <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
|
+
|
|
+ clocks = <&gcc PCIE_1_A_CLK>,
|
|
+ <&gcc PCIE_1_H_CLK>,
|
|
+ <&gcc PCIE_1_PHY_CLK>;
|
|
+ clock-names = "core", "iface", "phy";
|
|
+
|
|
+ resets = <&gcc PCIE_1_ACLK_RESET>,
|
|
+ <&gcc PCIE_1_HCLK_RESET>,
|
|
+ <&gcc PCIE_1_POR_RESET>,
|
|
+ <&gcc PCIE_1_PCI_RESET>,
|
|
+ <&gcc PCIE_1_PHY_RESET>;
|
|
+ reset-names = "axi", "ahb", "por", "pci", "phy";
|
|
+
|
|
+ pinctrl-0 = <&pcie1_pins>;
|
|
+ pinctrl-names = "default";
|
|
+
|
|
+ perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
|
|
+
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ pcie2: pci@1b900000 {
|
|
+ compatible = "qcom,pcie-v0";
|
|
+ reg = <0x1b900000 0x1000
|
|
+ 0x1b902000 0x80
|
|
+ 0x1ba00000 0x100
|
|
+ 0x35f00000 0x100000>;
|
|
+ reg-names = "dbi", "elbi", "parf", "config";
|
|
+ device_type = "pci";
|
|
+ linux,pci-domain = <2>;
|
|
+ bus-range = <0x00 0xff>;
|
|
+ num-lanes = <1>;
|
|
+ #address-cells = <3>;
|
|
+ #size-cells = <2>;
|
|
+
|
|
+ ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */
|
|
+ 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
|
|
+
|
|
+ interrupts = <GIC_SPI 71 IRQ_TYPE_NONE>;
|
|
+ interrupt-names = "msi";
|
|
+ #interrupt-cells = <1>;
|
|
+ interrupt-map-mask = <0 0 0 0x7>;
|
|
+ interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
|
+ <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
|
+ <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
|
+ <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
|
+
|
|
+ clocks = <&gcc PCIE_2_A_CLK>,
|
|
+ <&gcc PCIE_2_H_CLK>,
|
|
+ <&gcc PCIE_2_PHY_CLK>;
|
|
+ clock-names = "core", "iface", "phy";
|
|
+
|
|
+ resets = <&gcc PCIE_2_ACLK_RESET>,
|
|
+ <&gcc PCIE_2_HCLK_RESET>,
|
|
+ <&gcc PCIE_2_POR_RESET>,
|
|
+ <&gcc PCIE_2_PCI_RESET>,
|
|
+ <&gcc PCIE_2_PHY_RESET>;
|
|
+ reset-names = "axi", "ahb", "por", "pci", "phy";
|
|
+
|
|
+ pinctrl-0 = <&pcie2_pins>;
|
|
+ pinctrl-names = "default";
|
|
+
|
|
+ perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
|
|
+
|
|
+ status = "disabled";
|
|
+ };
|
|
};
|
|
|
|
sfpb_mutex: sfpb-mutex {
|