openwrt/target/linux/brcm63xx/patches-3.14/527-board_dva-g3810bn-tl-1.patch
Jonas Gorski e5cadabb58 brcm63xx: Fix HW553 support
- adsl and lan leds are swapped.
- internetkey is labeled as hspa.
- enable status led and reset button for failsafe.
- use new leds script.
- fix switch configuration.
- remove enet0 from board_info.
- add profile.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41588
2014-07-12 12:31:39 +00:00

85 lines
1.4 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -2587,6 +2587,73 @@ static struct board_info __initdata boar
},
}
};
+
+/* D-Link DVA-G3810BN/TL */
+static struct board_info __initdata board_DVAG3810BN = {
+ .name = "DVAG3810BN",
+ .expected_cpu_id = 0x6358,
+
+ .has_uart0 = 1,
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 0,
+ .use_internal_phy = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+
+ .has_ohci0 = 1,
+ .has_pccard = 1,
+ .has_ehci0 = 1,
+
+ .leds = {
+ {
+ .name = "DVAG3810BN::voip",
+ .gpio = 1,
+ },
+ {
+ .name = "DVAG3810BN::dsl",
+ .gpio = 22,
+ .active_low = 1,
+ },
+ {
+ .name = "DVAG3810BN::internet",
+ .gpio = 23,
+ .active_low = 1,
+ },
+ {
+ .name = "DVAG3810BN::power",
+ .gpio = 4,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "DVAG3810BN::stop",
+ .gpio = 5,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 34,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
#endif
/*
@@ -2792,6 +2859,7 @@ static const struct board_info __initcon
&board_ct6373_1,
&board_HW553,
&board_spw303v,
+ &board_DVAG3810BN,
#endif
#ifdef CONFIG_BCM63XX_CPU_6368