openwrt/target/linux/brcm47xx/Makefile
Rafał Miłecki 06405df7a8 brcm47xx: bump kernel to 4.4
Kernel 4.4 was ready for brcm47xx for almost a year now but I kept
postponing the bump due to problems with Linksys WRT300N v1.0. OpenWrt
and LEDE with 4.4 were hanging at the booting with the:
> Starting program at 0x80001000
(the last CFE message).

This was a permanent state, "make distclean" wasn't helping, I spent
hours debugging this and I was reliably reproducing the issue every
time. I also reported it on linux-mips ML in the thread:
> BCM4704 stopped booting with 4.4 (due to vmlinux size?)

After ~month I started working on WRT300N again. I got hangs as expected
every time I switched from 4.1 to 4.4. I started experimenting with:
1) TRX content (I tried dropping rootfs partition)
2) BZ_TEXT_START of lzma-loader
3) Flashing other variants of image: lzma compressed kernel (without a
   loader), gzip compressed one, uncompressed one.

At some point I got rootfs-less image booting and after that I couldn't
reproduce problem anymore, even with a complete firmware. It seems like
hardware was in some locked/unstable state that got magically fixed.

I have LEDE working now, tested it even with "make distclean", it seems
we can bump kernel now. I'll keep testing it on WRT300N for some time.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-24 17:22:23 +02:00

29 lines
724 B
Makefile

#
# Copyright (C) 2006-2008 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
ARCH:=mipsel
BOARD:=brcm47xx
BOARDNAME:=Broadcom BCM47xx/53xx (MIPS)
FEATURES:=squashfs usb
SUBTARGETS:=generic mips74k legacy
MAINTAINER:=Hauke Mehrtens <hauke@hauke-m.de>
KERNEL_PATCHVER:=4.4
define Target/Description
Build firmware images for Broadcom based BCM47xx/53xx routers with MIPS CPU, *not* ARM.
endef
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += swconfig wpad-mini nvram otrx \
kmod-leds-gpio kmod-gpio-button-hotplug \
kmod-ledtrig-default-on kmod-ledtrig-timer kmod-ledtrig-netdev
$(eval $(call BuildTarget))