openwrt/target/linux/lantiq/dts/WBMR.dts
blogic b7fc892eb5 lantiq: move partitions into partion table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49280
2016-05-10 10:43:12 +02:00

187 lines
3.1 KiB
Plaintext

/dts-v1/;
/include/ "ar9.dtsi"
/ {
model = "WBMR - Buffalo WBMR-HP-G300H";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
leds {
boot = &power_green;
failsafe = &power_red;
running = &power_green;
dsl = &dsl;
internet = &online_green;
usb = &usb;
wifi = &wifi;
};
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x20000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x60000 0x1f20000>;
};
partition@0x1fc0000 {
label = "board";
reg = <0x1fc0000 0x20000>;
read-only;
};
partition@0x1fe0000 {
label = "calibration";
reg = <0x1fe0000 0x20000>;
read-only;
};
};
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0x1fd0024 0x6>;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
pci-in {
lantiq,groups = "req1";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
pci-out {
lantiq,groups = "gnt1";
lantiq,output = <1>;
lantiq,pull = <0>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
};
etop@E180000 {
phy-mode = "rgmii";
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 36 0>;
};
pci@E105400 {
status = "okay";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio 0 1>;
linux,code = <0x211>;
};
reset {
label = "reset";
gpios = <&gpio 37 1>;
linux,code = <0x198>;
};
eject {
label = "eject";
gpios = <&gpio 34 1>;
linux,code = <0xf7>;
};
movie {
label = "movie";
gpios = <&gpio 22 1>;
linux,code = <0x109>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_green: power {
label = "wbmr:green:power";
gpios = <&gpio 1 1>;
default-state = "keep";
};
power_red: power2 {
label = "wbmr:red:power";
gpios = <&gpio 5 1>;
};
security {
label = "wbmr:yellow:security";
gpios = <&gpio 14 1>;
};
wifi: wifi {
label = "wbmr:green:wireless";
gpios = <&gpio 15 1>;
};
dsl: dsl {
label = "wbmr:green:dsl";
gpios = <&gpio 16 1>;
};
online_green: online {
label = "wbmr:green:internet";
gpios = <&gpio 17 1>;
};
online2 {
label = "wbmr:red:internet";
gpios = <&gpio 18 1>;
};
movie {
label = "wbmr:blue:movie";
gpios = <&gpio 20 1>;
};
usb: usb {
label = "wbmr:green:usb";
gpios = <&gpio 28 1>;
default-state = "on";
};
};
};