f8d55e7541
This makes it possible to use swconfig to controll the switch. This was tested with devices using b43 and bgmac. This was not tested on devices using tg3. This does not support the adm switch used in some very old devices. SVN-Revision: 37304
268 lines
7.0 KiB
Bash
Executable File
268 lines
7.0 KiB
Bash
Executable File
#!/bin/sh /etc/rc.common
|
|
# Copyright (C) 2006 OpenWrt.org
|
|
|
|
START=05
|
|
|
|
start() {
|
|
[ -e /etc/config/network ] && {
|
|
local batch
|
|
|
|
config_cb() {
|
|
case "$1" in
|
|
switch)
|
|
option_cb() {
|
|
case "$1" in
|
|
vlan[0-9]|vlan1[0-5])
|
|
local id="${1#vlan}"
|
|
local ports="${2%\*}"
|
|
append batch "delete network.eth0.${1}${N}"
|
|
append batch "set network.eth0_${id}=switch_vlan${N}"
|
|
append batch "set network.eth0_${id}.device=eth0${N}"
|
|
append batch "set network.eth0_${id}.vlan=${id}${N}"
|
|
append batch "set network.eth0_${id}.ports='${ports}'${N}"
|
|
;;
|
|
esac
|
|
}
|
|
;;
|
|
switch_vlan)
|
|
option_cb() { :; }
|
|
batch=""
|
|
;;
|
|
esac
|
|
}
|
|
|
|
config_load network
|
|
|
|
[ -n "$batch" ] && {
|
|
logger -t netconfig "migrating switch config to new format ..."
|
|
echo "$batch${N}commit network" | uci batch
|
|
}
|
|
|
|
exit 0
|
|
}
|
|
|
|
mkdir -p /etc/config
|
|
|
|
(
|
|
if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
|
|
# WGT634u
|
|
echo boardtype=wgt634u
|
|
else
|
|
strings "$(find_mtd_part nvram)"
|
|
fi
|
|
) | awk '
|
|
function p(cfgname, name) {
|
|
if (c[name] != "") print " option " cfgname " \"" c[name] "\""
|
|
}
|
|
|
|
function vlan(id, name) {
|
|
if (c[name] != "") {
|
|
print "config switch_vlan eth0_" id
|
|
print " option device \"eth0\""
|
|
print " option vlan " id
|
|
print " option ports \"" c[name] "\""
|
|
print ""
|
|
}
|
|
}
|
|
|
|
function macinc(mac, maca, i, result) {
|
|
split(mac, maca, ":")
|
|
for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
|
|
if (++maca[6] > 0xff) {
|
|
maca[5]++
|
|
maca[6] = 0
|
|
}
|
|
for (i = 1; i <= 6; i++) {
|
|
if (i != 1) result = result ":"
|
|
result = result sprintf("%02x", maca[i])
|
|
}
|
|
return result
|
|
}
|
|
|
|
BEGIN {
|
|
FS="="
|
|
c["lan_ifname"]="eth0.1"
|
|
c["wan_ifname"]="eth0.2"
|
|
c["vlan1ports"]="1 2 3 4 5t"
|
|
c["vlan2ports"]="0 5t"
|
|
getline < "/proc/diag/model"
|
|
model=$0
|
|
for (i = 0; i < 6; i++) {
|
|
if (mac_check != "") mac_check = mac_check ":"
|
|
mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
|
|
}
|
|
if (system("[ -d /proc/switch/eth0 ] ") == 0) {
|
|
getline cpuport < "/proc/switch/eth0/cpuport"
|
|
}
|
|
if (system("command -v swconfig > /dev/null") == 0) {
|
|
"swconfig dev switch0 help \| sed -ne \"s\|.*cpu @ \\([0-9]*\\).*\|\\1\|p\"" | getline cpuport
|
|
}
|
|
if (cpuport == "8") {
|
|
c["vlan1ports"]="1 2 3 4 8t"
|
|
c["vlan2ports"]="0 8t"
|
|
}
|
|
}
|
|
|
|
($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) || \
|
|
($1 ~ /^vlan[0-9]{1,2}ports$/) {
|
|
nvram[$1] = $2
|
|
}
|
|
|
|
END {
|
|
if (((nvram["vlan0ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan1ports"] ~ /^4 8/ && (cpuport == "8"))) || \
|
|
((nvram["vlan1ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan2ports"] ~ /^4 8/ && (cpuport == "8")))) {
|
|
c["vlan1ports"] = "0 1 2 3 8t"
|
|
c["vlan2ports"] = "4 8t"
|
|
}
|
|
if (((nvram["vlan0ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan1ports"] ~ /^4 5/ && (cpuport == "5"))) || \
|
|
((nvram["vlan1ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan2ports"] ~ /^4 5/ && (cpuport == "5")))) {
|
|
c["vlan1ports"] = "0 1 2 3 5t"
|
|
c["vlan2ports"] = "4 5t"
|
|
}
|
|
if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
|
|
c["wan_ifname"] = ""
|
|
c["lan_ifname"] = "eth1"
|
|
}
|
|
if (model == "ASUS WL-330gE") {
|
|
c["wan_ifname"] = ""
|
|
c["lan_ifname"] = "eth0.1"
|
|
c["vlan1ports"] = "4 5t"
|
|
c["vlan2ports"] = ""
|
|
}
|
|
if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) {
|
|
c["wan_ifname"] = "eth1"
|
|
c["lan_ifname"] = "eth0"
|
|
}
|
|
if ((model == "ASUS WL-500g Premium V2") || (model == "Dell TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) {
|
|
c["vlan1ports"] = "0 1 2 3 5t"
|
|
c["vlan2ports"] = "4 5t"
|
|
}
|
|
if (model == "Dell TrueMobile 2300") {
|
|
c["lan_ifname"] = "eth0"
|
|
c["wan_ifname"] = "eth1"
|
|
c["vlan1ports"] = "0 1 2 3 4 5"
|
|
c["vlan2ports"] = ""
|
|
}
|
|
if (nvram["boardtype"] == "bcm94710r4") {
|
|
# Toshiba WRC-1000
|
|
c["lan_ifname"] = "eth0"
|
|
c["wan_ifname"] = "eth1"
|
|
}
|
|
if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) {
|
|
c["vlan1ports"] = "0 1 2 3 5t"
|
|
c["vlan2ports"] = "4 5t"
|
|
}
|
|
if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
|
|
if (nvram["boardnum"] == "45") {
|
|
# WL-500gP
|
|
c["vlan1ports"] = "1 2 3 4 5t"
|
|
c["vlan2ports"] = "0 5t"
|
|
} else {
|
|
# Generic BCM94704
|
|
c["vlan1ports"] = "0 1 2 3 4 5"
|
|
c["vlan2ports"] = ""
|
|
c["lan_ifname"] = "eth0"
|
|
c["wan_ifname"] = "eth1"
|
|
|
|
# MAC addresses on 4704 tend to be screwed up. Add a workaround here
|
|
if (nvram["et0macaddr"] ~ mac_check) {
|
|
c["lan_macaddr"] = nvram["et0macaddr"]
|
|
c["wan_macaddr"] = macinc(c["lan_macaddr"])
|
|
}
|
|
}
|
|
}
|
|
# Buffalo WBR-B11 and Buffalo WBR-G54
|
|
if (nvram["boardtype"] == "bcm94710ap") {
|
|
c["vlan1ports"] = "0 1 2 3 4 5"
|
|
c["vlan2ports"] = ""
|
|
c["lan_ifname"] = "eth0"
|
|
c["wan_ifname"] = "eth1"
|
|
}
|
|
|
|
# WAP54G
|
|
if ((nvram["boardnum"] == "2") || \
|
|
(nvram["boardnum"] == "1024")) {
|
|
c["lan_ifname"]="eth0"
|
|
c["wan_ifname"]=""
|
|
}
|
|
|
|
# Sitecom WL-105b
|
|
if ((nvram["boardum"] == "2") && \
|
|
(nvram["GemtekPmonVer"] == "1")) {
|
|
c["lan_ifname"]="eth0"
|
|
c["wan_ifname"]=""
|
|
}
|
|
|
|
# ASUS WL-700gE
|
|
# These are actually same as defaults above. For some reason this script applies
|
|
# Generic BCM94704 settings instead so we revert to proper settings here.
|
|
# Hopefully someone will fix this properly soon.
|
|
if (model == "ASUS WL-700gE") {
|
|
c["lan_ifname"]="eth0.1"
|
|
c["wan_ifname"]="eth0.2"
|
|
c["vlan1ports"]="1 2 3 4 5t"
|
|
c["vlan2ports"]="0 5t"
|
|
}
|
|
if ((model == "Motorola WR850G V2/V3") || (model == "Siemens SE505 V2")) {
|
|
c["vlan1ports"]="0 1 2 3 5t"
|
|
c["vlan2ports"]="4 5t"
|
|
}
|
|
if (model == "ASUS WL-500W") {
|
|
c["lan_ifname"] = "eth0"
|
|
c["wan_ifname"] = "eth1"
|
|
c["vlan1ports"] = "0 1 2 3 4 5"
|
|
c["vlan2ports"] = ""
|
|
}
|
|
if (model == "OvisLink WL-1600GL") {
|
|
c["lan_ifname"] = "eth0.1"
|
|
c["wan_ifname"] = "eth0.2"
|
|
c["vlan1ports"] = "0 1 2 3 5t"
|
|
c["vlan2ports"] = "4 5t"
|
|
}
|
|
if (model == "SimpleTech SimpleShare NAS") {
|
|
c["lan_ifname"] = "eth0"
|
|
c["wan_ifname"] = ""
|
|
c["vlan1ports"] = ""
|
|
c["vlan2ports"] = ""
|
|
}
|
|
|
|
if (c["vlan1ports"] || c["vlan2ports"]) {
|
|
print "#### VLAN configuration "
|
|
print "config switch eth0"
|
|
print " option enable 1"
|
|
print ""
|
|
vlan(1, "vlan1ports")
|
|
vlan(2, "vlan2ports")
|
|
}
|
|
print "#### Loopback configuration"
|
|
print "config interface loopback"
|
|
print " option ifname \"lo\""
|
|
print " option proto static"
|
|
print " option ipaddr 127.0.0.1"
|
|
print " option netmask 255.0.0.0"
|
|
print ""
|
|
print ""
|
|
print "#### LAN configuration"
|
|
print "config interface lan"
|
|
print " option type bridge"
|
|
p("ifname", "lan_ifname")
|
|
p("macaddr", "lan_macaddr")
|
|
print " option proto static"
|
|
print " option ipaddr 192.168.1.1"
|
|
print " option netmask 255.255.255.0"
|
|
print ""
|
|
print ""
|
|
if (c["wan_ifname"]) {
|
|
print "#### WAN configuration"
|
|
print "config interface wan"
|
|
p("ifname", "wan_ifname")
|
|
p("macaddr", "wan_macaddr")
|
|
print " option proto dhcp"
|
|
} else {
|
|
print "#### WAN configuration (disabled)"
|
|
print "#config interface wan"
|
|
print "# option proto dhcp"
|
|
}
|
|
}' > /etc/config/network
|
|
}
|