openwrt

mr/openwrt

Go to file

Florian Fainelli d0fdf2c5ed fix comment only valid for bcm6345 SVN-Revision: 16881		2009-07-17 15:57:09 +00:00
docs	configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450 )	2009-07-05 11:17:49 +00:00
include	move the toolchain_install stampfile to the right place to fix spurious missing toolchain errors after cleaning stuff	2009-07-11 12:48:59 +00:00
package	make patches against iptables apply again after update to 1.4.4 (#5540 )	2009-07-17 12:37:10 +00:00
scripts	Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	2009-06-08 21:17:58 +00:00
target	fix comment only valid for bcm6345	2009-07-17 15:57:09 +00:00
toolchain	This patch adds a target for the IBM PowerXCell Accelerator Board. (aka mvXCell-8i from MatrixVision or GigaAccel 180 from Fixstars)	2009-07-16 10:19:13 +00:00
tools	firmware-utils: add new tool for the wrt400n (based on a patch by Sandeep Mistry <sandeep.mistry at gmail.com>)	2009-07-12 08:59:18 +00:00
.gitignore	add logs/ to .gitignore	2009-04-24 01:04:57 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	add a config option to select the binary stripping method to use (between none, strip & sstrip)	2009-07-07 02:34:58 +00:00
feeds.conf.default	switch to LuCI 0.9.x branch	2009-06-10 23:55:19 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	2009-05-28 18:40:37 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
rules.mk	add a config option to select the binary stripping method to use (between none, strip & sstrip)	2009-07-07 02:34:58 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org