openwrt

mr/openwrt

Go to file

John Crispin df22a8e3d0 ralink: fix USB host function for Intenso M2M The ubootloader of the M2M sets the reset bits for both USB device and USB host during initialization (to save a few mA of power during boot). However, for the usb<->sata bridge to be properly detected, it is necessary to clear both reset bits as otherwise the kernel logs will just be filled with: usb 1-1: device descriptor read/64, error -145 ... Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> SVN-Revision: 44248		2015-02-03 10:11:11 +00:00
config	config: fix typo in Global build settings menu	2015-01-28 12:05:58 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	Fix possible fail to check for dependencies	2015-02-03 10:11:06 +00:00
package	map: Fix white space errors	2015-02-03 10:10:54 +00:00
scripts	scripts: avoid outputting empty lines in gen-dependencies.sh	2015-01-29 22:05:31 +00:00
target	ralink: fix USB host function for Intenso M2M	2015-02-03 10:11:11 +00:00
toolchain	eglibc: mark 2.15 as broken it is effected by CVE-2015-0235	2015-01-28 12:06:05 +00:00
tools	ar71xx: Revert "added board support for compex wpj558"	2015-02-02 10:32:04 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	add git-src to .gitignore	2014-01-12 12:06:39 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	scripts/config: sync with linux upstream	2015-01-08 14:33:53 +00:00
feeds.conf.default	Move telephony feed to github	2014-12-11 10:30:51 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	Revert "build: use ONESHELL to speed up scanning and the toplevel makefile"	2014-10-22 10:47:26 +00:00
README	Add 'subversion' build dependency to README	2014-08-31 12:06:32 +00:00
rules.mk	build: do not assume that gcc-{ar,ranlib,nm} is usable with an external toolchain	2015-01-10 16:14:25 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org