openwrt/target/linux/ramips/dts/ALL5002.dts
John Crispin 770b28f146 add the dts files that describe the boards in future
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36168
2013-04-03 09:59:46 +00:00

96 lines
1.5 KiB
Plaintext

/dts-v1/;
/include/ "rt3352.dtsi"
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ALL5002", "ralink,rt3352-soc";
model = "Allnet ALL5002/ALL5003";
memorydetect {
ralink,memory = <0x0 0x200000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,32448k@0x50000(firmware)";
};
palmbus@10000000 {
sysc@0 {
ralink,pinmmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
ralink,gpiomux = "i2c";
ralink,uartmux = "gpio";
ralink,wdtmux = <1>;
};
gpio0: gpio@600 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l25635e";
reg = <0 0>;
linux,modalias = "m25p80", "mx25l25635e";
spi-max-frequency = <10000000>;
};
};
};
ethernet@10100000 {
status = "okay";
};
esw@10110000 {
status = "okay";
ralink,portmap = <0x3f>;
};
wmac@10180000 {
status = "okay";
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
i2c-gpio {
compatible = "i2c-gpio";
gpios = <&gpio0 1 0 &gpio0 2 0>;
i2c-gpio,delay-us = <10>;
pcf0: iexp@38 {
#gpio-cells = <2>;
compatible = "inxp,pcf8574a";
reg = <0x38>;
gpio-controller;
};
hwmon@4b {
compatible = "national,lm92";
reg = <0x4b>;
};
};
gpio-leds {
compatible = "gpio-leds";
ld1 {
label = "allnet:green:ld1";
gpios = <&pcf0 0 1>;
};
ld2 {
label = "allnet:green:ld2";
gpios = <&pcf0 1 1>;
};
};
};