mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
e190743d25
openwrt/target/linux/ar71xx/image/Makefile
Gabor Juhos b12d752a63 ar71xx: preliminary support for the TL-WR1043ND 
Adds board support for the TP-Link TL-WR1043ND Based on the Atheros AP81 platform.
Presently the RTL8366RB switch support is missing due to no driver.
The ethernet works with 5 ports@1Gbit but is missing vlan support.

Hope Ive done this right, First time submiting a patch.

Signed-off-by: Andrew Tarabaras <andrew@advancedtechnologies.com.au>

SVN-Revision: 18696
2009-12-08 12:46:25 +00:00

542 lines
18 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2008-2009 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
IMGNAME:=$(BIN_DIR)/openwrt-$(BOARD)
define imgname
$(IMGNAME)-$(2)-$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1)))
endef
VMLINUX:=$(IMGNAME)-vmlinux
ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
VMLINUX:=$(IMGNAME)-vmlinux-initramfs
endif
define CompressLzma
$(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2)
endef
define PatchKernelLzma
cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))'
$(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).bin.lzma)
endef
define PatchKernelGzip
cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))'
gzip -9 -c $(KDIR)/vmlinux-$(1) > $(KDIR)/vmlinux-$(1).bin.gz
endef
define MkImageLzma
mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma \
-e 0x80060000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(1) $(2)
endef
define MkImageGzip
mkimage -A mips -O linux -T kernel -a 0x80060000 -C gzip \
-e 0x80060000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(1) $(2)
endef
define Image/BuildKernel
cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
cp $(KDIR)/vmlinux $(VMLINUX).bin
gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
$(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
dd if=$(KDIR)/vmlinux.bin.lzma of=$(VMLINUX).lzma bs=65536 conv=sync
dd if=$(KDIR)/vmlinux.bin.gz of=$(VMLINUX).gz bs=65536 conv=sync
$(call MkImageGzip,$(KDIR)/vmlinux.bin.gz,$(IMGNAME)-uImage-gzip.bin)
$(call MkImageLzma,$(KDIR)/vmlinux.bin.lzma,$(IMGNAME)-uImage-lzma.bin)
endef
define Image/Build/WRT400N
$(call PatchKernelLzma,$(2),$(3))
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 1310720 ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 6488064 ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big"; \
else \
mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
0x80060000 \
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
( \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=1280k conv=sync; \
dd if=$(KDIR)/root.$(1) bs=6336k conv=sync; \
echo -n $(4); \
) > $(call imgname,$(1),$(2)).bin; \
wrt400n $(KDIR)/vmlinux-$(2).uImage $(KDIR)/root.$(1) $(call imgname,$(1),$(2)).webui; \
fi; fi
endef
dir825b1_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,1024k(kernel),5184k(rootfs),64k(caldata)ro,6208k@0x50000(firmware)
define Image/Build/DIR825B1
$(call PatchKernelLzma,$(2),$(3) $(dir825b1_mtdlayout))
$(call MkImageLzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(call imgname,$(1),$(2)).bin)
if [ `stat -c%s "$(call imgname,$(1),$(2)).bin"` -gt 1048576 ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
rm -f $(call imgname,$(1),$(2)).bin; \
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 5308416 ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big"; \
rm -f $(call imgname,$(1),$(2)).bin; \
else \
dd if=$(KDIR)/root.$(1) of=$(call imgname,$(1),$(2)).bin bs=1k seek=1024; \
cp $(call imgname,$(1),$(2)).bin $(call imgname,$(1),$(2))-backup-loader.bin; \
echo -n "01AP94-AR7161-RT-080619-00" >> $(call imgname,$(1),$(2))-backup-loader.bin; \
fi; fi
endef
cameo_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,896k(kernel),2880k(rootfs),64k(art)ro,3776k@0x30000(firmware)
define Image/Build/Cameo
$(call PatchKernelLzma,$(2),$(3) $(cameo_mtdlayout))
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 917504 ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 2949120 ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big"; \
else \
mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
0x80060000 \
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
( \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=896k conv=sync; \
dd if=$(KDIR)/root.$(1) bs=2880k conv=sync; \
echo -n $(4); \
) > $(call imgname,$(1),$(2)).uni; \
fi; fi
endef
define Image/Build/AP83
$(call PatchKernelGzip,$(2),$(3))
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.gz"` -gt 1310720 ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).bin.gz is too big"; \
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 6619136 ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big"; \
else \
mkimage -A mips -O linux -T kernel -a 0x80060000 -C gzip -e \
0x80060000 \
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(KDIR)/vmlinux-$(2).bin.gz \
$(KDIR)/vmlinux-$(2).uImage; \
dd if=$(KDIR)/vmlinux-$(2).uImage \
of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
dd if=$(KDIR)/root.$(1) \
of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
( \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=1280k conv=sync; \
dd if=$(KDIR)/root.$(1); \
) > $(call imgname,$(1),$(2)-firmware).bin; \
fi; fi
endef
define Image/Build/MyLoader
-$(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) \
-p0x030000:0xd0000:al:0x80060000:kernel:$(KDIR)/vmlinux.bin.lzma \
-p0x100000:0:::rootfs:$(KDIR)/root.$(1) \
$(call imgname,$(1),$(2))-2M.img
-$(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s 0x400000 \
-p0x030000:0xd0000:al:0x80060000:kernel:$(KDIR)/vmlinux.bin.lzma \
-p0x100000:0:::rootfs:$(KDIR)/root.$(1) \
$(call imgname,$(1),$(2))-4M.img
-$(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s 0x800000 \
-p0x030000:0xd0000:al:0x80060000:kernel:$(KDIR)/vmlinux.bin.lzma \
-p0x100000:0:::rootfs:$(KDIR)/root.$(1) \
$(call imgname,$(1),$(2))-8M.img
-$(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s 0x1000000 \
-p0x030000:0xd0000:al:0x80060000:kernel:$(KDIR)/vmlinux.bin.lzma \
-p0x100000:0:::rootfs:$(KDIR)/root.$(1) \
$(call imgname,$(1),$(2))-16M.img
endef
ubntxm_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1024k(kernel),6528k(rootfs),256k(cfg)ro,64k(EEPROM)ro,7552k@0x50000(firmware)
define Image/Build/UBNTXM
$(call PatchKernelLzma,$(2),$(3) $(ubntxm_mtdlayout))
$(call MkImageLzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(KDIR)/vmlinux-$(2).uImage.bin)
dd if=$(KDIR)/vmlinux-$(2).uImage.bin of=$(KDIR)/vmlinux-$(2).uImage bs=1024k conv=sync
-$(STAGING_DIR_HOST)/bin/mkfwimage \
-B $(4) -v $(5).$(6).OpenWrt.$(REVISION) \
-k $(KDIR)/vmlinux-$(2).uImage \
-r $(BIN_DIR)/openwrt-$(BOARD)-root.$(1) \
-o $(call imgname,$(1),$(2))-factory.bin
( \
dd if=$(KDIR)/vmlinux-$(2).uImage; \
dd if=$(BIN_DIR)/openwrt-$(BOARD)-root.$(1); \
) > $(call imgname,$(1),$(2))-sysupgrade.bin
endef
define Image/Build/UBNT
$(call PatchKernelLzma,$(2),$(3))
dd if=$(KDIR)/vmlinux-$(2).bin.lzma of=$(KDIR)/vmlinux-$(2).lzma bs=64k conv=sync
-$(STAGING_DIR_HOST)/bin/mkfwimage \
-B $(4) -v $(5).$(6).OpenWrt.$(REVISION) \
-k $(KDIR)/vmlinux-$(2).lzma \
-r $(BIN_DIR)/openwrt-$(BOARD)-root.$(1) \
-o $(call imgname,$(1),$(2))-factory.bin
-sh $(TOPDIR)/scripts/combined-image.sh \
"$(KDIR)/vmlinux-$(2).lzma" \
"$(BIN_DIR)/openwrt-$(BOARD)-root.$(1)" \
$(call imgname,$(1),$(2))-sysupgrade.bin
endef
define Image/Build/Planex
$(call PatchKernelGzip,$(2),$(3))
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.gz"` -gt 1441792 ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).bin.gz is too big"; \
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 6356992 ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big"; \
else \
mkimage -A mips -O linux -T kernel -a 0x80060000 -C gzip -e \
0x80060000 \
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(KDIR)/vmlinux-$(2).bin.gz $(KDIR)/vmlinux-$(2).uImage; \
( \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=1408k conv=sync; \
dd if=$(KDIR)/root.$(1) bs=6208k conv=sync; \
) > $(call imgname,$(1),$(2)).bin; \
$(STAGING_DIR_HOST)/bin/mkplanexfw \
-B $(2) \
-v 2.00.00 \
-i $(call imgname,$(1),$(2)).bin \
-o $(call imgname,$(1),$(2)).webui; \
fi; fi
endef
define Image/Build/TPLINK
$(call PatchKernelGzip,$(2),$(3))
-$(STAGING_DIR_HOST)/bin/mktplinkfw \
-B $(4) -N OpenWrt -V $(REVISION)\
-k $(KDIR)/vmlinux-$(2).bin.gz \
-r $(BIN_DIR)/openwrt-$(BOARD)-root.$(1) \
-o $(call imgname,$(1),$(2))-universal.bin
endef
define Image/Build/CyberTAN
$(call PatchKernelGzip,$(2),$(3))
$(call MkImageGzip,$(KDIR)/vmlinux-$(2).bin.gz,$(KDIR)/vmlinux-$(2).uImage)
( \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=64k conv=sync; \
dd if=/dev/zero bs=1 count=65476; \
dd if=$(KDIR)/root.$(1) bs=64k; \
) > $(KDIR)/vmlinux-$(2).image
$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/vmlinux-$(2).trx \
-f $(KDIR)/vmlinux-$(2).image
-$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(4) -g \
-i $(KDIR)/vmlinux-$(2).trx \
-o $(call imgname,$(1),$(2)).bin
endef
wndr3700_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,1024k(kernel),6656k(rootfs),64k(art)ro,7680k@0x70000(firmware)
define Image/Build/WNDR3700
$(call PatchKernelLzma,$(2),$(3) $(wndr3700_mtdlayout))
$(call MkImageLzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(KDIR)/vmlinux-$(2).uImage)
mkdir $(KDIR)/wndr3700
mkdir $(KDIR)/wndr3700/image
$(STAGING_DIR_HOST)/bin/wndr3700 \
$(KDIR)/vmlinux-$(2).uImage \
$(KDIR)/wndr3700/image/uImage
$(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
$(KDIR)/wndr3700 $(KDIR)/vmlinux-$(2).uImage.squashfs.tmp \
-nopad -noappend -root-owned -be
-rm -rf $(KDIR)/wndr3700
mkimage -A mips -O linux -T filesystem -C none \
-a 0xbf070000 -e 0xbf070000 \
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(KDIR)/vmlinux-$(2).uImage.squashfs.tmp \
$(KDIR)/vmlinux-$(2).uImage.squashfs.tmp2
$(STAGING_DIR_HOST)/bin/wndr3700 \
$(KDIR)/vmlinux-$(2).uImage.squashfs.tmp2 \
$(KDIR)/vmlinux-$(2).uImage.squashfs
-rm -f $(KDIR)/vmlinux-$(2).uImage.squashfs.tmp*
( \
dd if=$(KDIR)/vmlinux-$(2).uImage.squashfs bs=1M conv=sync; \
dd if=$(KDIR)/root.$(1) bs=64k; \
) > $(call imgname,$(1),$(2))-sysupgrade.bin
$(STAGING_DIR_HOST)/bin/mkdniimg \
-B WNDR3700 -v OpenWrt.$(REVISION) \
-i $(call imgname,$(1),$(2))-sysupgrade.bin \
-o $(call imgname,$(1),$(2))-factory.img
endef
define Image/Build/Template/Compex
$(call Image/Build/MyLoader,$(1),$(2))
endef
define Image/Build/Template/Compex/squashfs
$(call Image/Build/Template/Compex,squashfs,$(1))
endef
define Image/Build/Template/WRT400N
$(call Image/Build/WRT400N,$(1),$(2),$(3),$(4))
endef
define Image/Build/Template/WRT400N/squashfs
$(call Image/Build/Template/WRT400N,squashfs,$(1),$(2),$(3))
endef
define Image/Build/Template/WRT400N/jffs2-64k
$(call Image/Build/Template/WRT400N,jffs2-64k,$(1),$(2),$(3))
endef
define Image/Build/Template/DIR825B1
$(call Image/Build/DIR825B1,$(1),$(2),$(3),$(4))
endef
define Image/Build/Template/DIR825B1/squashfs
$(call Image/Build/Template/DIR825B1,squashfs,$(1),$(2),$(3))
endef
define Image/Build/Template/DIR825B1/jffs2-64k
$(call Image/Build/Template/DIR825B1,jffs2-64k,$(1),$(2),$(3))
endef
define Image/Build/Template/CyberTAN
$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4))
endef
define Image/Build/Template/CyberTAN/squashfs
$(call Image/Build/Template/CyberTAN,squashfs,$(1),$(2),$(3))
endef
define Image/Build/Template/CyberTAN/jffs2-64k
$(call Image/Build/Template/CyberTAN,jffs2-64k,$(1),$(2),$(3))
endef
define Image/Build/Template/Cameo
$(call Image/Build/Cameo,$(1),$(2),$(3),$(4))
endef
define Image/Build/Template/Cameo/squashfs
$(call Image/Build/Template/Cameo,squashfs,$(1),$(2),$(3))
endef
define Image/Build/Template/AP83
$(call Image/Build/AP83,$(1),$(2),$(3))
endef
define Image/Build/Template/AP83/squashfs
$(call Image/Build/Template/AP83,squashfs,$(1),$(2))
endef
define Image/Build/Template/AP83/jffs2-64k
$(call Image/Build/Template/AP83,jffs2-64k,$(1),$(2))
endef
define Image/Build/Template/TPLINK
$(call Image/Build/TPLINK,$(1),$(2),$(3),$(4))
endef
define Image/Build/Template/TPLINK/squashfs
$(call Image/Build/Template/TPLINK,squashfs,$(1),$(2),$(3))
endef
define Image/Build/Template/TPLINK4K
$(call Image/Build/TPLINK,$(1),$(2),$(3),$(4))
endef
define Image/Build/Template/TPLINK4K/squashfs
$(call Image/Build/Template/TPLINK,squashfs,$(1),$(2),$(3))
endef
define Image/Build/Template/UBNT
$(call Image/Build/UBNT,$(1),$(2),$(3),$(4),$(5),$(6))
endef
define Image/Build/Template/UBNT/squashfs
$(call Image/Build/Template/UBNT,squashfs,$(1),$(2),$(3),$(4),$(5))
endef
define Image/Build/Template/UBNT/jffs2-64k
$(call Image/Build/Template/UBNT,jffs2-64k,$(1),$(2),$(3),$(4),$(5))
endef
define Image/Build/Template/UBNTXM
$(call Image/Build/UBNTXM,$(1),$(2),$(3),$(4),$(5),$(6))
endef
define Image/Build/Template/UBNTXM/squashfs
$(call Image/Build/Template/UBNTXM,squashfs,$(1),$(2),$(3),$(4),$(5))
endef
define Image/Build/Template/UBNTXM/jffs2-64k
$(call Image/Build/Template/UBNTXM,jffs2-64k,$(1),$(2),$(3),$(4),$(5))
endef
define Image/Build/Template/Planex
$(call Image/Build/Planex,$(1),$(2),$(3))
endef
define Image/Build/Template/Planex/squashfs
$(call Image/Build/Template/Planex,squashfs,$(1),$(2))
endef
define Image/Build/Template/Planex/jffs2-64k
$(call Image/Build/Template/Planex,jffs2-64k,$(1),$(2))
endef
define Image/Build/Template/WNDR3700
$(call Image/Build/WNDR3700,$(1),$(2),$(3))
endef
define Image/Build/Template/WNDR3700/squashfs
$(call Image/Build/Template/WNDR3700,squashfs,$(1),$(2))
endef
define Image/Build/Template/WNDR3700/jffs2-64k
$(call Image/Build/Template/WNDR3700,jffs2-64k,$(1),$(2))
endef
define Image/Build/Profile/AP83
$(call Image/Build/Template/AP83/$(1),ap83,board=AP83)
endef
define Image/Build/Profile/WP543
$(call Image/Build/Template/Compex/$(1),wp543)
endef
define Image/Build/Profile/DIR615C1
$(call Image/Build/Template/Cameo/$(1),dir-615c1,board=TEW-632BRP,"AP81-AR9130-RT-070614-02")
endef
define Image/Build/Profile/TEW632BRP
$(call Image/Build/Template/Cameo/$(1),tew-632brp,board=TEW-632BRP,"AP81-AR9130-RT-070614-00")
endef
define Image/Build/Profile/TEW652BRP
$(call Image/Build/Template/Cameo/$(1),tew-652brp,board=TEW-632BRP,"AP81-AR9130-RT-080609-05")
endef
define Image/Build/Profile/A02RBW300N
$(call Image/Build/Template/Cameo/$(1),a02-rb-w300n,board=TEW-632BRP,"AP81-AR9130-RT-070614-03")
endef
define Image/Build/Profile/UBNTRS
$(call Image/Build/Template/UBNT/$(1),ubnt-rs,board=UBNT-RS,RS,RSx,ar7100)
endef
define Image/Build/Profile/UBNTRSPRO
$(call Image/Build/Template/UBNT/$(1),ubnt-rspro,board=UBNT-RSPRO,RSPRO,RSPRO,ar7100pro)
endef
define Image/Build/Profile/UBNTLSSR71
$(call Image/Build/Template/UBNT/$(1),ubnt-ls-sr71,board=UBNT-LS-SR71,LS-SR71,LS-SR71,ar7100)
endef
define Image/Build/Profile/UBNTBULLETM
$(call Image/Build/Template/UBNTXM/$(1),ubnt-bullet-m,board=UBNT-BM,XM,UBNTXM,ar7240)
endef
define Image/Build/Profile/UBNTROCKETM
$(call Image/Build/Template/UBNTXM/$(1),ubnt-rocket-m,board=UBNT-RM,XM,UBNTXM,ar7240)
endef
define Image/Build/Profile/UBNTNANOM
$(call Image/Build/Template/UBNTXM/$(1),ubnt-nano-m,board=UBNT-NM,XM,UBNTXM,ar7240)
endef
define Image/Build/Profile/UBNT
$(call Image/Build/Profile/UBNTRS,$(1))
$(call Image/Build/Profile/UBNTRSPRO,$(1))
$(call Image/Build/Profile/UBNTLSSR71,$(1))
$(call Image/Build/Profile/UBNTBULLETM,$(1))
$(call Image/Build/Profile/UBNTROCKETM,$(1))
$(call Image/Build/Profile/UBNTNANOM,$(1))
endef
define Image/Build/Profile/MZKW04NU
$(call Image/Build/Template/Planex/$(1),mzk-w04nu,board=MZK-W04NU)
endef
define Image/Build/Profile/MZKW300NH
$(call Image/Build/Template/Planex/$(1),mzk-w300nh,board=MZK-W300NH)
endef
define Image/Build/Profile/TLWR741NDV1
$(call Image/Build/Template/TPLINK4K/$(1),tl-wr741ndv1,board=TL-WR741ND,TL-WR741NDv1)
endef
define Image/Build/Profile/TLWR841NDV3
$(call Image/Build/Template/TPLINK/$(1),tl-wr841ndv3,board=TL-WR941ND,TL-WR841NDv3)
endef
define Image/Build/Profile/TLWR841NDV5
$(call Image/Build/Template/TPLINK4K/$(1),tl-wr841ndv5,board=TL-WR741ND,TL-WR841NDv5)
endef
define Image/Build/Profile/TLWR941NDV2
$(call Image/Build/Template/TPLINK/$(1),tl-wr941ndv2,board=TL-WR941ND,TL-WR941NDv2)
endef
define Image/Build/Profile/TLWR1043NDV1
$(call Image/Build/Template/TPLINK/$(1),tl-wr1043ndv1,board=TL-WR1043ND,TL-WR1043NDv1)
endef
define Image/Build/Profile/WNDR3700
$(call Image/Build/Template/WNDR3700/$(1),wndr3700,board=WNDR3700)
endef
define Image/Build/Profile/WRT400N
$(call Image/Build/Template/WRT400N/$(1),wrt400n,board=WRT400N)
endef
define Image/Build/Profile/DIR825B1
$(call Image/Build/Template/DIR825B1/$(1),dir-825-b1,board=DIR-825-B1)
endef
define Image/Build/Profile/WRT160NL
$(call Image/Build/Template/CyberTAN/$(1),wrt160nl,board=WRT160NL,1.00.01)
endef
define Image/Build/Profile/Default
$(call Image/Build/Profile/AP83,$(1))
$(call Image/Build/Profile/A02RBW300N,$(1))
$(call Image/Build/Profile/DIR615C1,$(1))
$(call Image/Build/Profile/DIR825B1,$(1))
$(call Image/Build/Profile/MZKW04NU,$(1))
$(call Image/Build/Profile/MZKW300NH,$(1))
$(call Image/Build/Profile/TEW632BRP,$(1))
$(call Image/Build/Profile/TEW652BRP,$(1))
$(call Image/Build/Profile/TLWR741NDV1,$(1))
$(call Image/Build/Profile/TLWR841NDV3,$(1))
$(call Image/Build/Profile/TLWR841NDV5,$(1))
$(call Image/Build/Profile/TLWR941NDV2,$(1))
$(call Image/Build/Profile/TLWR1043NDV1,$(1))
$(call Image/Build/Profile/UBNT,$(1))
$(call Image/Build/Profile/WP543,$(1))
$(call Image/Build/Profile/WNDR3700,$(1))
$(call Image/Build/Profile/WRT400N,$(1))
$(call Image/Build/Profile/WRT160NL,$(1))
endef
define Image/Build/Profile/Madwifi
$(call Image/Build/Profile/UBNTRS,$(1))
$(call Image/Build/Profile/UBNTRSPRO,$(1))
$(call Image/Build/Profile/UBNTLSSR71,$(1))
$(call Image/Build/Profile/WP543,$(1))
endef
define Image/Build/squashfs
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
dd if=$(KDIR)/root.squashfs of=$(KDIR)/root.squashfs-4k.tmp0 bs=4k conv=sync
$(call add_jffs2_mark,$(KDIR)/root.squashfs-4k.tmp0)
dd if=$(KDIR)/root.squashfs-4k.tmp0 of=$(IMGNAME)-root.squashfs-4k bs=4k conv=sync
$(call add_jffs2_mark,$(IMGNAME)-root.squashfs-4k)
rm -f $(KDIR)/root.squashfs-4k.tmp0
endef
define Image/Build
$(call Image/Build/$(1))
dd if=$(KDIR)/root.$(1) of=$(IMGNAME)-root.$(1) bs=128k conv=sync
$(call Image/Build/Profile/$(PROFILE),$(1))
endef
$(eval $(call BuildImage))
Reference in New Issue View Git Blame Copy Permalink