Piotr Dymacz e767980eb8 ar71xx: add support for Wallys DR531 ... Wallys DR531 is based on Qualcomm Atheros QCA9531 v2. Short specification: - 550/400/200 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet - 64 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz with external PA (SE2576L), up to 30 dBm - 2x MMCX connectors - mini-PCIe connector with PCIe/USB buses and SIM slot - 7x LED, 1x button, 1x optional buzzer - UART, (E)JTAG and LED headers Default configuration: - WAN on eth1 (RJ45 near DC jack) - LAN on eth0 (RJ45 near button) - S4 LED set to be status LED - all LEDs configurable form user space - button configured for reset Flash instruction (do it under U-Boot, using UART): 1. tftp 0x80060000 lede-ar71xx-generic-dr531-squashfs-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>		2016-07-13 20:03:10 +02:00
..
board.d	ar71xx: add support for Wallys DR531	2016-07-13 20:03:10 +02:00
hotplug.d	ar71xx: extract ath10k wifi board.bin for the OpenMesh MR1750v2 board	2016-05-23 12:19:26 +02:00
uci-defaults	ar71xx: base-files: remove the now unneeded 09_fix-seama-header	2016-07-11 13:26:36 +02:00
diag.sh	ar71xx: add support for Wallys DR531	2016-07-13 20:03:10 +02:00
inittab	image / basefiles: make console password configurable	2016-04-18 21:53:07 +02:00