openwrt/target/linux/ar71xx/base-files/etc/board.d/02_network
Piotr Dymacz 16afa08d19 ar71xx: add support for COMFAST CF-E380AC v1 and v2
COMFAST CF-E380AC v1/v2 is a ceiling mount AP with PoE
support, based on Qualcomm/Atheros QCA9558+QCA9880+AR8035.

There are two versions of this model, with different RAM
and U-Boot mtd partition sizes:
- v1: 128 MB of RAM, 128 KB U-Boot image size
- v2: 256 MB of RAM, 256 KB U-Boot image size

Version number is available only inside vendor GUI,
hardware and markings are the same.

Short specification:

- 720/600/200 MHz (CPU/DDR/AHB)
- 1x 10/100/1000 Mbps Ethernet, with PoE support
- 128 or 256 MB of RAM (DDR2)
- 16 MB of FLASH
- 3T3R 2.4 GHz, with external PA (SE2576L), up to 28 dBm
- 3T3R 5 GHz, with external PA (SE5003L1), up to 30 dBm
- 6x internal antennas
- 1x RGB LED, 1x button
- UART (T11), LEDs/GPIO (J7) and USB (T12) headers on PCB
- external watchdog (Pericon Technology PT7A7514)

Flash instruction:

Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-21 10:05:40 +01:00

474 lines
9.2 KiB
Bash
Executable File

#!/bin/sh
#
# Copyright (C) 2011-2015 OpenWrt.org
#
. /lib/functions/system.sh
. /lib/functions/uci-defaults.sh
. /lib/ar71xx.sh
ar71xx_setup_interfaces()
{
local board="$1"
case "$board" in
airgatewaypro)
ucidef_add_switch "switch0" \
"0@eth0" "4:lan" "5:wan"
;;
airrouter|\
ap121|\
ap121-mini|\
ap96|\
dir-600-a1|\
dir-615-c1|\
dir-615-e1|\
dir-615-e4|\
hiwifi-hc6361|\
ja76pf|\
mc-mac1200r|\
minibox-v1|\
mynet-n600|\
oolite|\
qihoo-c301|\
rb-750|\
rb-751|\
som9331|\
tew-632brp|\
tew-712br|\
tew-732br|\
tl-mr3220|\
tl-mr3220-v2|\
tl-mr3420|\
tl-wdr3320-v2|\
tl-wdr3500|\
tl-wr741nd|\
tl-wr741nd-v4|\
tl-wr841n-v11|\
tl-wr841n-v7|\
tl-wr841n-v9|\
tl-wr842n-v3|\
whr-g301n|\
whr-hp-g300n|\
whr-hp-gn|\
wzr-hp-ag300h|\
zbt-we1526)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
;;
alfa-ap120c|\
all0305|\
antminer-s1|\
antminer-s3|\
antrouter-r1|\
aw-nr580|\
bullet-m|\
c-55|\
cap4200ag|\
cf-e380ac-v1|\
cf-e380ac-v2|\
eap120|\
eap300v2|\
eap7660d|\
el-mini|\
loco-m-xw|\
mr12|\
mr16|\
mr1750|\
mr1750v2|\
mr18|\
mr600|\
mr600v2|\
mr900|\
mr900v2|\
mynet-rext|\
rb-411|\
rb-911g-2hpnd|\
rb-911g-5hpacd|\
rb-911g-5hpnd|\
rb-912uag-2hpnd|\
rb-912uag-5hpnd|\
rb-sxt2n|\
rb-sxt5n|\
rocket-m-xw|\
tl-mr10u|\
tl-mr11u|\
tl-mr12u|\
tl-mr13u|\
tl-mr3020|\
tl-mr3040|\
tl-mr3040-v2|\
tl-wa701nd-v2|\
tl-wa7210n-v2|\
tl-wa750re|\
tl-wa801nd-v2|\
tl-wa830re-v2|\
tl-wa850re|\
tl-wa901nd|\
tl-wa901nd-v2|\
tl-wa901nd-v3|\
tl-wa901nd-v4|\
tl-wr703n|\
tl-wr802n-v1|\
tube2h|\
unifiac-lite|\
wndap360|\
wp543)
ucidef_set_interface_lan "eth0"
;;
alfa-ap96|\
alfa-nx|\
ap83|\
gl-ar150|\
gl-ar300m|\
gl-domino|\
gl-inet|\
gl-mifi|\
jwap003|\
pb42|\
pb44|\
rb-951ui-2hnd|\
routerstation|\
tl-wr710n|\
tl-wr720n-v3|\
tl-wr810n|\
wpe72|\
wrtnode2q)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
all0258n|\
all0315n|\
dlan-hotspot|\
dlan-pro-500-wp|\
dr344|\
ja76pf2|\
rocket-m-ti|\
ubnt-unifi-outdoor)
ucidef_set_interface_lan "eth0 eth1"
;;
ap113|\
pb92|\
wzr-hp-g300nh2)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "2:wan"
;;
ap132|\
ap136|\
ap152|\
rb-750gl|\
rb-751g|\
rb-951g-2hnd|\
wlr8100|\
wzr-hp-g450h)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
;;
ap135-020|\
ap136-020|\
bhr-4grv2|\
tew-823dru|\
tl-wr1043nd-v2|\
wzr-450hp2)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
;;
ap136-010|\
ap147-010|\
nbg6616|\
nbg6716)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
;;
ap143|\
rb-433|\
rb-433u)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "5@eth1"
;;
archer-c5|\
archer-c7|\
tl-wdr4900-v2)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;
arduino-yun|\
dir-505-a1|\
tl-wa801nd-v3)
ucidef_set_interface_lan "eth1"
;;
bsb)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan" "3:lan"
;;
c-60)
ucidef_add_switch "switch0" \
"0@eth0" "3:wan" "4:lan"
;;
cap324)
ucidef_set_interface_lan "eth0" "dhcp"
;;
cpe210|\
cpe510)
ucidef_add_switch "switch0" \
"0@eth0" "5:lan" "4:wan"
;;
cr3000)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
;;
cr5000|\
dgl-5500-a1|\
dhp-1565-a1|\
dir-825-c1|\
dir-835-a1|\
esr900|\
mynet-n750|\
wndr3700v4|\
wndr4300)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
;;
dap-2695-a1)
ucidef_add_switch "switch0" "0@eth0" "2:lan" "3:wan" "6@eth1"
;;
db120|\
rb-2011l|\
rb-2011uas|\
rb-2011uas-2hnd|\
rb-2011uias|\
rb-2011uias-2hnd)
case "$board" in
rb-2011uas*|\
rb-2011uias|\
rb-2011uias-2hnd)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" "6:sfp"
;;
*)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
;;
esac
ucidef_add_switch "switch1" \
"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:lan"
;;
dir-615-i1|\
omy-g1|\
r6100|\
smart-300|\
tl-mr3420-v2|\
tl-wdr6500-v2|\
tl-wr841n-v8|\
tl-wr842n-v2|\
tl-wr941nd-v5|\
tl-wr941nd-v6|\
wnr1000-v2|\
wnr2000-v3|\
wnr2000-v4|\
wnr2200|\
wnr612-v2|\
wpn824n)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4@eth1"
;;
dir-825-b1|\
nbg460n_550n_550nh|\
tew-673gru|\
wzr-hp-g300nh)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
;;
dlan-pro-1200-ac)
ucidef_set_interface_lan "eth0"
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan" "4:lan"
ucidef_add_switch_attr "switch0" "enable" "false"
;;
el-m150)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "3@eth1"
;;
dir-869-a1|\
epg5000|\
esr1750)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
;;
ew-dorin)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:wan"
;;
ew-dorin-router)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan"
;;
dw33d|\
f9k1115v2)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" \
"2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" "0@eth0" "1:wan"
;;
gl-ar300)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
;;
jwap230)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "5:wan" "6@eth1"
;;
nanostation-m-xw)
ucidef_add_switch "switch0" \
"0@eth0" "5:lan" "1:wan"
;;
onion-omega)
ucidef_set_interface_lan "wlan0"
;;
rb-435g)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan" "2:lan"
;;
rb-450)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "5@eth1"
;;
rb-450g|\
routerstation-pro)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "2:lan:3" "3:lan:2" "4:lan:1"
;;
rb-493g)
ucidef_set_interfaces_lan_wan "eth0 eth1.1" "eth1.2"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
ucidef_add_switch "switch1" \
"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
;;
tellstick-znet-lite)
ucidef_set_interface_wan "eth0"
ucidef_set_interface_raw "wlan" "wlan0" "dhcp"
;;
tl-wdr4300|\
tl-wr1041n-v2)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
;;
tl-wpa8630)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
;;
tl-wr1043nd)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
;;
tl-wr2543n)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
;;
tl-wr841n-v1|\
tl-wr941nd)
ucidef_set_interface_raw "eth" "eth0"
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
;;
uap-pro|\
wpj342)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:wan"
;;
unifiac-pro)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:wan"
;;
wndr3700)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
ucidef_add_switch_attr "switch0" "blinkrate" 2
ucidef_add_switch_port_attr "switch0" 1 led 6
ucidef_add_switch_port_attr "switch0" 2 led 9
ucidef_add_switch_port_attr "switch0" 5 led 2
;;
wpj344)
ucidef_add_switch "switch0" \
"0@eth0" "3:lan" "2:wan"
;;
wpj558)
ucidef_add_switch "switch0" \
"5:lan" "1:wan" "6@eth0"
;;
wrt160nl)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4@eth0"
;;
wzr-hp-g450h)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:1 3:lan:2 4:lan:3 5:lan:4" "1:wan"
;;
z1)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" "5:wan"
;;
*)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
esac
}
ar71xx_setup_macs()
{
local board="$1"
local lan_mac=""
local wan_mac=""
case $board in
dgl-5500-a1|\
dir-825-c1)
wan_mac=$(mtd_get_mac_ascii nvram "wan_mac")
;;
dhp-1565-a1|\
dir-835-a1|\
wndr3700v4|\
wndr4300)
lan_mac=$(mtd_get_mac_binary caldata 0)
wan_mac=$(mtd_get_mac_binary caldata 6)
;;
esr900)
wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
;;
dir-869-a1|\
mynet-n750)
wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
;;
esac
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
}
board_config_update
board=$(ar71xx_board_name)
ar71xx_setup_interfaces $board
ar71xx_setup_macs $board
board_config_flush
exit 0