openwrt/target/linux/brcm63xx/patches-4.4/574-board_HG622.patch
Álvaro Fernández Rojas a529b41cff brcm63xx: set DSL-274XB-F1 ath9k LED as active high
D-Link DSL-274XB rev F1 has an active high ath9k LED.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 16:40:51 +02:00

73 lines
1.8 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -2061,6 +2061,53 @@ static struct board_info __initdata boar
},
};
+static struct board_info __initdata board_HG622 = {
+ .name = "96368MVWG_hg622",
+ .expected_cpu_id = 0x6368,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 2,
+
+ .has_caldata = 1,
+ .caldata = {
+ {
+ .vendor = PCI_VENDOR_ID_RALINK,
+ .caldata_offset = 0xfa0000,
+ .slot = 1,
+ .eeprom = "rt2x00.eeprom",
+ },
+ },
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "port1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "port2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "port3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "port4",
+ },
+ },
+ },
+};
+
static struct sprom_fixup __initdata vr3025u_fixups[] = {
{ .offset = 97, .value = 0xfeb3 },
{ .offset = 98, .value = 0x1618 },
@@ -2567,6 +2614,7 @@ static const struct board_info __initcon
&board_96368mvwg,
&board_96368mvngr,
&board_DGND3700v1_3800B,
+ &board_HG622,
&board_HG655b,
&board_P870HW51A_V2,
&board_VR3025u,
@@ -2675,6 +2723,7 @@ static struct of_device_id const bcm963x
{ .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
{ .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
{ .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+ { .compatible = "huawei,hg622", .data = &board_HG622, },
{ .compatible = "huawei,hg655b", .data = &board_HG655b, },
{ .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },
{ .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },