openwrt

mr/openwrt

Go to file

Hauke Mehrtens ed0dc1c97e b53: hardcode reset GPIO for Linksys WRT300N 1.1 According to the thread https://forum.openwrt.org/viewtopic.php?id=48281 b53 uses GPIO 7: [ 4.470000] b53_common: [DBG] b53_switch_reset_gpio using 7 and causes device to self-reboot. GPIO 8 was found in CFE boot log: "Reset switch via GPIO 8 ..." Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 41526		2014-07-06 11:40:51 +00:00
config	config/Config-images.in: enable zlib as the default ubi compression	2014-06-24 18:14:05 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	build: temporarily disable PKG_CHECK_FORMAT_SECURITY until after the release	2014-07-04 06:23:57 +00:00
package	samba36: update to minor version 3.6.24	2014-07-06 11:23:13 +00:00
scripts	scripts/abs2rel.pl: remove, it is unused	2014-07-04 12:11:40 +00:00
target	b53: hardcode reset GPIO for Linksys WRT300N 1.1	2014-07-06 11:40:51 +00:00
toolchain	musl: add sgidefs.h	2014-06-29 22:25:51 +00:00
tools	b43-tools: update to version 019	2014-07-02 20:52:50 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	add git-src to .gitignore	2014-01-12 12:06:39 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	move menuconfig options into separate files	2013-11-22 14:30:40 +00:00
feeds.conf.default	feeds.conf.default: add management feed	2014-06-12 15:08:08 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	build: remove duplicate variable definitions	2014-03-21 15:54:11 +00:00
README	build: BSD compile fixes	2013-03-07 17:32:29 +00:00
rules.mk	partially revert "build: remove check for nonexistant CONFIG_TAR_VERBOSITY variable and move TAR_OPTIONS to unpack.mk"	2014-03-22 19:52:48 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org