mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
f18c12c9f8
openwrt/target/linux/ipq40xx/patches-4.14/712-mr33-essedma.patch
coolsnowwolf 7542d6a8dd merge with Openwrt 18.06 stable
2019-01-02 21:02:03 +08:00

341 lines
11 KiB
Diff
Raw Blame History

--- a/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
+++ b/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
@@ -17,6 +17,11 @@
#include <linux/of.h>
#include <linux/of_net.h>
#include <linux/timer.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/clk.h>
+#include <linux/string.h>
+#include <linux/reset.h>
#include "edma.h"
#include "ess_edma.h"
@@ -83,7 +88,103 @@ void edma_read_reg(u16 reg_addr, volatil
*reg_value = readl((void __iomem *)(edma_hw_addr + reg_addr));
}
-/* edma_change_tx_coalesce()
+static void ess_write_reg(struct edma_common_info *edma, u16 reg_addr, u32 reg_value)
+{
+ writel(reg_value, ((void __iomem *)
+ ((unsigned long)edma->ess_hw_addr + reg_addr)));
+}
+
+static void ess_read_reg(struct edma_common_info *edma, u16 reg_addr,
+ volatile u32 *reg_value)
+{
+ *reg_value = readl((void __iomem *)
+ ((unsigned long)edma->ess_hw_addr + reg_addr));
+}
+
+static int ess_reset(struct edma_common_info *edma)
+{
+ struct device_node *switch_node = NULL;
+ struct reset_control *ess_rst;
+ u32 regval;
+
+ switch_node = of_find_node_by_name(NULL, "ess-switch");
+ if (!switch_node) {
+ pr_err("switch-node not found\n");
+ return -EINVAL;
+ }
+
+ ess_rst = of_reset_control_get(switch_node, "ess_rst");
+ of_node_put(switch_node);
+
+ if (IS_ERR(ess_rst)) {
+ pr_err("failed to find ess_rst!\n");
+ return -ENOENT;
+ }
+
+ reset_control_assert(ess_rst);
+ msleep(10);
+ reset_control_deassert(ess_rst);
+ msleep(100);
+ reset_control_put(ess_rst);
+
+ /* Enable only port 5 <--> port 0
+ * bits 0:6 bitmap of ports it can fwd to */
+#define SET_PORT_BMP(r,v) \
+ ess_read_reg(edma, r, &regval); \
+ ess_write_reg(edma, r, ((regval & ~0x3F) | v));
+
+ SET_PORT_BMP(ESS_PORT0_LOOKUP_CTRL,0x20);
+ SET_PORT_BMP(ESS_PORT1_LOOKUP_CTRL,0x00);
+ SET_PORT_BMP(ESS_PORT2_LOOKUP_CTRL,0x00);
+ SET_PORT_BMP(ESS_PORT3_LOOKUP_CTRL,0x00);
+ SET_PORT_BMP(ESS_PORT4_LOOKUP_CTRL,0x00);
+ SET_PORT_BMP(ESS_PORT5_LOOKUP_CTRL,0x01);
+ ess_write_reg(edma, ESS_RGMII_CTRL, 0x400);
+ ess_write_reg(edma, ESS_PORT0_STATUS, ESS_PORT_1G_FDX);
+ ess_write_reg(edma, ESS_PORT5_STATUS, ESS_PORT_1G_FDX);
+ ess_write_reg(edma, ESS_PORT0_HEADER_CTRL, 0);
+#undef SET_PORT_BMP
+
+ /* forward multicast and broadcast frames to CPU */
+ ess_write_reg(edma, ESS_FWD_CTRL1,
+ (ESS_PORTS_ALL << ESS_FWD_CTRL1_UC_FLOOD_S) |
+ (ESS_PORTS_ALL << ESS_FWD_CTRL1_MC_FLOOD_S) |
+ (ESS_PORTS_ALL << ESS_FWD_CTRL1_BC_FLOOD_S));
+
+ return 0;
+}
+
+void ess_set_port_status_speed(struct edma_common_info *edma,
+ struct phy_device *phydev, uint8_t port_id)
+{
+ uint16_t reg_off = ESS_PORT0_STATUS + (4 * port_id);
+ uint32_t reg_val = 0;
+
+ ess_read_reg(edma, reg_off, &reg_val);
+
+ /* reset the speed bits [0:1] */
+ reg_val &= ~ESS_PORT_STATUS_SPEED_INV;
+
+ /* set the new speed */
+ switch(phydev->speed) {
+ case SPEED_1000: reg_val |= ESS_PORT_STATUS_SPEED_1000; break;
+ case SPEED_100: reg_val |= ESS_PORT_STATUS_SPEED_100; break;
+ case SPEED_10: reg_val |= ESS_PORT_STATUS_SPEED_10; break;
+ default: reg_val |= ESS_PORT_STATUS_SPEED_INV; break;
+ }
+
+ /* check full/half duplex */
+ if (phydev->duplex) {
+ reg_val |= ESS_PORT_STATUS_DUPLEX_MODE;
+ } else {
+ reg_val &= ~ESS_PORT_STATUS_DUPLEX_MODE;
+ }
+
+ ess_write_reg(edma, reg_off, reg_val);
+}
+
+/*
+ * edma_change_tx_coalesce()
* change tx interrupt moderation timer
*/
void edma_change_tx_coalesce(int usecs)
@@ -551,6 +652,31 @@ static struct ctl_table edma_table[] = {
{}
};
+static int ess_parse(struct edma_common_info *edma)
+{
+ struct device_node *switch_node;
+ int ret = -EINVAL;
+
+ switch_node = of_find_node_by_name(NULL, "ess-switch");
+ if (!switch_node) {
+ pr_err("cannot find ess-switch node\n");
+ goto out;
+ }
+
+ edma->ess_hw_addr = of_io_request_and_map(switch_node,
+ 0, KBUILD_MODNAME);
+ if (!edma->ess_hw_addr) {
+ pr_err("%s ioremap fail.", __func__);
+ goto out;
+ }
+
+ edma->ess_clk = of_clk_get_by_name(switch_node, "ess_clk");
+ ret = clk_prepare_enable(edma->ess_clk);
+out:
+ of_node_put(switch_node);
+ return ret;
+}
+
/* edma_axi_netdev_ops
* Describe the operations supported by registered netdevices
*
@@ -786,6 +912,17 @@ static int edma_axi_probe(struct platfor
miibus = mdio_data->mii_bus;
}
+ if (of_property_read_bool(np, "qcom,single-phy") &&
+ edma_cinfo->num_gmac == 1) {
+ err = ess_parse(edma_cinfo);
+ if (!err)
+ err = ess_reset(edma_cinfo);
+ if (err)
+ goto err_single_phy_init;
+ else
+ edma_cinfo->is_single_phy = true;
+ }
+
for_each_available_child_of_node(np, pnp) {
const char *mac_addr;
@@ -1074,11 +1211,15 @@ static int edma_axi_probe(struct platfor
for (i = 0; i < edma_cinfo->num_gmac; i++) {
if (adapter[i]->poll_required) {
+ int phy_mode = of_get_phy_mode(np);
+
+ if (phy_mode < 0)
+ phy_mode = PHY_INTERFACE_MODE_SGMII;
adapter[i]->phydev =
phy_connect(edma_netdev[i],
(const char *)adapter[i]->phy_id,
&edma_adjust_link,
- PHY_INTERFACE_MODE_SGMII);
+ phy_mode);
if (IS_ERR(adapter[i]->phydev)) {
dev_dbg(&pdev->dev, "PHY attach FAIL");
err = -EIO;
@@ -1125,6 +1266,9 @@ err_rmap_alloc_fail:
for (i = 0; i < edma_cinfo->num_gmac; i++)
unregister_netdev(edma_netdev[i]);
err_register:
+err_single_phy_init:
+ iounmap(edma_cinfo->ess_hw_addr);
+ clk_disable_unprepare(edma_cinfo->ess_clk);
err_mdiobus_init_fail:
edma_free_rx_rings(edma_cinfo);
err_rx_rinit:
@@ -1185,6 +1329,8 @@ static int edma_axi_remove(struct platfo
del_timer_sync(&edma_stats_timer);
edma_free_irqs(adapter);
unregister_net_sysctl_table(edma_cinfo->edma_ctl_table_hdr);
+ iounmap(edma_cinfo->ess_hw_addr);
+ clk_disable_unprepare(edma_cinfo->ess_clk);
edma_free_tx_resources(edma_cinfo);
edma_free_rx_resources(edma_cinfo);
edma_free_tx_rings(edma_cinfo);
--- a/drivers/net/ethernet/qualcomm/essedma/edma.c
+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c
@@ -161,8 +161,10 @@ static void edma_configure_rx(struct edm
/* Set Rx FIFO threshold to start to DMA data to host */
rxq_ctrl_data = EDMA_FIFO_THRESH_128_BYTE;
- /* Set RX remove vlan bit */
- rxq_ctrl_data |= EDMA_RXQ_CTRL_RMV_VLAN;
+ if (!edma_cinfo->is_single_phy) {
+ /* Set RX remove vlan bit */
+ rxq_ctrl_data |= EDMA_RXQ_CTRL_RMV_VLAN;
+ }
edma_write_reg(EDMA_REG_RXQ_CTRL, rxq_ctrl_data);
}
@@ -1295,6 +1297,10 @@ void edma_adjust_link(struct net_device
if (status == __EDMA_LINKUP && adapter->link_state == __EDMA_LINKDOWN) {
dev_info(&adapter->pdev->dev, "%s: GMAC Link is up with phy_speed=%d\n", netdev->name, phydev->speed);
adapter->link_state = __EDMA_LINKUP;
+ if (adapter->edma_cinfo->is_single_phy) {
+ ess_set_port_status_speed(adapter->edma_cinfo, phydev,
+ ffs(adapter->dp_bitmap) - 1);
+ }
netif_carrier_on(netdev);
if (netif_running(netdev))
netif_tx_wake_all_queues(netdev);
@@ -1388,10 +1394,12 @@ netdev_tx_t edma_xmit(struct sk_buff *sk
}
/* Check and mark VLAN tag offload */
- if (skb_vlan_tag_present(skb))
- flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG;
- else if (adapter->default_vlan_tag)
- flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG;
+ if (!adapter->edma_cinfo->is_single_phy) {
+ if (unlikely(skb_vlan_tag_present(skb)))
+ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG;
+ else if (adapter->default_vlan_tag)
+ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG;
+ }
/* Check and mark checksum offload */
if (likely(skb->ip_summed == CHECKSUM_PARTIAL))
--- a/drivers/net/ethernet/qualcomm/essedma/edma.h
+++ b/drivers/net/ethernet/qualcomm/essedma/edma.h
@@ -31,6 +31,7 @@
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/sysctl.h>
@@ -331,6 +332,10 @@ struct edma_common_info {
struct edma_hw hw; /* edma hw specific structure */
struct edma_per_cpu_queues_info edma_percpu_info[CONFIG_NR_CPUS]; /* per cpu information */
spinlock_t stats_lock; /* protect edma stats area for updation */
+
+ bool is_single_phy;
+ void __iomem *ess_hw_addr;
+ struct clk *ess_clk;
};
/* transimit packet descriptor (tpd) ring */
@@ -443,4 +448,6 @@ void edma_change_tx_coalesce(int usecs);
void edma_change_rx_coalesce(int usecs);
void edma_get_tx_rx_coalesce(u32 *reg_val);
void edma_clear_irq_status(void);
+void ess_set_port_status_speed(struct edma_common_info *edma_cinfo,
+ struct phy_device *phydev, uint8_t port_id);
#endif /* _EDMA_H_ */
--- a/drivers/net/ethernet/qualcomm/essedma/ess_edma.h
+++ b/drivers/net/ethernet/qualcomm/essedma/ess_edma.h
@@ -329,4 +329,61 @@ struct edma_hw;
#define EDMA_RRD_PRIORITY_MASK 0x7
#define EDMA_RRD_PORT_TYPE_SHIFT 7
#define EDMA_RRD_PORT_TYPE_MASK 0x1F
+
+#define ESS_RGMII_CTRL 0x0004
+
+/* Port status registers */
+#define ESS_PORT0_STATUS 0x007C
+#define ESS_PORT1_STATUS 0x0080
+#define ESS_PORT2_STATUS 0x0084
+#define ESS_PORT3_STATUS 0x0088
+#define ESS_PORT4_STATUS 0x008C
+#define ESS_PORT5_STATUS 0x0090
+
+#define ESS_PORT_STATUS_HDX_FLOW_CTL 0x80
+#define ESS_PORT_STATUS_DUPLEX_MODE 0x40
+#define ESS_PORT_STATUS_RX_FLOW_EN 0x20
+#define ESS_PORT_STATUS_TX_FLOW_EN 0x10
+#define ESS_PORT_STATUS_RX_MAC_EN 0x08
+#define ESS_PORT_STATUS_TX_MAC_EN 0x04
+#define ESS_PORT_STATUS_SPEED_INV 0x03
+#define ESS_PORT_STATUS_SPEED_1000 0x02
+#define ESS_PORT_STATUS_SPEED_100 0x01
+#define ESS_PORT_STATUS_SPEED_10 0x00
+
+#define ESS_PORT_1G_FDX (ESS_PORT_STATUS_DUPLEX_MODE | ESS_PORT_STATUS_RX_FLOW_EN | \
+ ESS_PORT_STATUS_TX_FLOW_EN | ESS_PORT_STATUS_RX_MAC_EN | \
+ ESS_PORT_STATUS_TX_MAC_EN | ESS_PORT_STATUS_SPEED_1000)
+
+#define PHY_STATUS_REG 0x11
+#define PHY_STATUS_SPEED 0xC000
+#define PHY_STATUS_SPEED_SHIFT 14
+#define PHY_STATUS_DUPLEX 0x2000
+#define PHY_STATUS_DUPLEX_SHIFT 13
+#define PHY_STATUS_SPEED_DUPLEX_RESOLVED 0x0800
+#define PHY_STATUS_CARRIER 0x0400
+#define PHY_STATUS_CARRIER_SHIFT 10
+
+/* Port lookup control registers */
+#define ESS_PORT0_LOOKUP_CTRL 0x0660
+#define ESS_PORT1_LOOKUP_CTRL 0x066C
+#define ESS_PORT2_LOOKUP_CTRL 0x0678
+#define ESS_PORT3_LOOKUP_CTRL 0x0684
+#define ESS_PORT4_LOOKUP_CTRL 0x0690
+#define ESS_PORT5_LOOKUP_CTRL 0x069C
+
+#define ESS_PORT0_HEADER_CTRL 0x009C
+
+#define ESS_PORTS_ALL 0x3f
+
+#define ESS_FWD_CTRL1 0x0624
+#define ESS_FWD_CTRL1_UC_FLOOD BITS(0, 7)
+#define ESS_FWD_CTRL1_UC_FLOOD_S 0
+#define ESS_FWD_CTRL1_MC_FLOOD BITS(8, 7)
+#define ESS_FWD_CTRL1_MC_FLOOD_S 8
+#define ESS_FWD_CTRL1_BC_FLOOD BITS(16, 7)
+#define ESS_FWD_CTRL1_BC_FLOOD_S 16
+#define ESS_FWD_CTRL1_IGMP BITS(24, 7)
+#define ESS_FWD_CTRL1_IGMP_S 24
+
#endif /* _ESS_EDMA_H_ */
Reference in New Issue View Git Blame Copy Permalink