openwrt/target/linux/ipq806x/patches/0087-tty-serial-msm-Remove-direct-access-to-GSBI.patch
Luka Perkov 02629d8f87 kernel: update 3.14 to 3.14.18
Targets were build tested and patches are refreshed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42463
2014-09-10 21:40:19 +00:00

145 lines
4.2 KiB
Diff

From 025909cbf933cc20c2ff5ea9f87de8e17a739a08 Mon Sep 17 00:00:00 2001
From: Andy Gross <agross@codeaurora.org>
Date: Thu, 24 Apr 2014 11:31:22 -0500
Subject: [PATCH 087/182] tty: serial: msm: Remove direct access to GSBI
This patch removes direct access of the GSBI registers. GSBI configuration
should be done through the GSBI driver directly.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
---
drivers/tty/serial/msm_serial.c | 48 ++-------------------------------------
drivers/tty/serial/msm_serial.h | 5 ----
2 files changed, 2 insertions(+), 51 deletions(-)
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -52,7 +52,6 @@ struct msm_port {
struct clk *clk;
struct clk *pclk;
unsigned int imr;
- void __iomem *gsbi_base;
int is_uartdm;
unsigned int old_snap_state;
};
@@ -599,9 +598,7 @@ static const char *msm_type(struct uart_
static void msm_release_port(struct uart_port *port)
{
struct platform_device *pdev = to_platform_device(port->dev);
- struct msm_port *msm_port = UART_TO_MSM(port);
struct resource *uart_resource;
- struct resource *gsbi_resource;
resource_size_t size;
uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -612,28 +609,12 @@ static void msm_release_port(struct uart
release_mem_region(port->mapbase, size);
iounmap(port->membase);
port->membase = NULL;
-
- if (msm_port->gsbi_base) {
- writel_relaxed(GSBI_PROTOCOL_IDLE,
- msm_port->gsbi_base + GSBI_CONTROL);
-
- gsbi_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (unlikely(!gsbi_resource))
- return;
-
- size = resource_size(gsbi_resource);
- release_mem_region(gsbi_resource->start, size);
- iounmap(msm_port->gsbi_base);
- msm_port->gsbi_base = NULL;
- }
}
static int msm_request_port(struct uart_port *port)
{
- struct msm_port *msm_port = UART_TO_MSM(port);
struct platform_device *pdev = to_platform_device(port->dev);
struct resource *uart_resource;
- struct resource *gsbi_resource;
resource_size_t size;
int ret;
@@ -652,30 +633,8 @@ static int msm_request_port(struct uart_
goto fail_release_port;
}
- gsbi_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- /* Is this a GSBI-based port? */
- if (gsbi_resource) {
- size = resource_size(gsbi_resource);
-
- if (!request_mem_region(gsbi_resource->start, size,
- "msm_serial")) {
- ret = -EBUSY;
- goto fail_release_port_membase;
- }
-
- msm_port->gsbi_base = ioremap(gsbi_resource->start, size);
- if (!msm_port->gsbi_base) {
- ret = -EBUSY;
- goto fail_release_gsbi;
- }
- }
-
return 0;
-fail_release_gsbi:
- release_mem_region(gsbi_resource->start, size);
-fail_release_port_membase:
- iounmap(port->membase);
fail_release_port:
release_mem_region(port->mapbase, size);
return ret;
@@ -683,7 +642,6 @@ fail_release_port:
static void msm_config_port(struct uart_port *port, int flags)
{
- struct msm_port *msm_port = UART_TO_MSM(port);
int ret;
if (flags & UART_CONFIG_TYPE) {
port->type = PORT_MSM;
@@ -691,9 +649,6 @@ static void msm_config_port(struct uart_
if (ret)
return;
}
- if (msm_port->gsbi_base)
- writel_relaxed(GSBI_PROTOCOL_UART,
- msm_port->gsbi_base + GSBI_CONTROL);
}
static int msm_verify_port(struct uart_port *port, struct serial_struct *ser)
@@ -1110,6 +1065,7 @@ static struct of_device_id msm_match_tab
static struct platform_driver msm_platform_driver = {
.remove = msm_serial_remove,
+ .probe = msm_serial_probe,
.driver = {
.name = "msm_serial",
.owner = THIS_MODULE,
@@ -1125,7 +1081,7 @@ static int __init msm_serial_init(void)
if (unlikely(ret))
return ret;
- ret = platform_driver_probe(&msm_platform_driver, msm_serial_probe);
+ ret = platform_driver_register(&msm_platform_driver);
if (unlikely(ret))
uart_unregister_driver(&msm_uart_driver);
--- a/drivers/tty/serial/msm_serial.h
+++ b/drivers/tty/serial/msm_serial.h
@@ -109,11 +109,6 @@
#define UART_ISR 0x0014
#define UART_ISR_TX_READY (1 << 7)
-#define GSBI_CONTROL 0x0
-#define GSBI_PROTOCOL_CODE 0x30
-#define GSBI_PROTOCOL_UART 0x40
-#define GSBI_PROTOCOL_IDLE 0x0
-
#define UARTDM_RXFS 0x50
#define UARTDM_RXFS_BUF_SHIFT 0x7
#define UARTDM_RXFS_BUF_MASK 0x7