openwrt

mr/openwrt

Go to file

Hauke Mehrtens f587bacc26 brcm47xx: b44: start the phy We did not start the PHY when an external phy was in use. Without this patch the driver uses half duplex mode and the switch uses full duplex mode, which causes problems. Thank you fback for spotting this problem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 39719		2014-02-23 16:58:12 +00:00
config	config: lxc: enable KERNEL_POSIX_MQUEUE	2014-01-24 13:49:39 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	kernel: update 3.10 to 3.10.32	2014-02-23 10:59:40 +00:00
package	netifd: update to latest version, fixes wireless device reload handling	2014-02-23 08:13:28 +00:00
scripts	scripts/kconfig.pl: Indicate which file we couldn't open	2014-01-19 17:27:04 +00:00
target	brcm47xx: b44: start the phy	2014-02-23 16:58:12 +00:00
toolchain	gcc: prevent the use of LDRD/STRD on ARMv5TE	2014-02-19 19:20:10 +00:00
tools	cmake: upgrade to 2.8.12.2	2014-02-16 21:51:10 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	add git-src to .gitignore	2014-01-12 12:06:39 +00:00
BSDmakefile
Config.in	move menuconfig options into separate files	2013-11-22 14:30:40 +00:00
feeds.conf.default	feeds: disable the x-wrt feed, it is unmaintained	2014-02-03 14:29:04 +00:00
LICENSE
Makefile	build: it is no longer necessary to call make target/linux/clean as part of make clean	2012-12-02 15:26:28 +00:00
README	build: BSD compile fixes	2013-03-07 17:32:29 +00:00
rules.mk	FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options.	2013-11-29 10:59:51 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org