mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
29,561 Commits 3 Branches 0 Tags 517 MiB
873202fc0b
Commit Graph

29561 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Luka Perkov
873202fc0b kirkwood: add *plugs to uci-defaults 
Set defaults health led to a timer heartbeet (200/800)
and populate network for:

- GuruplugServerPlus
- SheevaPlug
- SheevaPlug with eSATA

Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 43752
 2014-12-19 11:05:13 +00:00
Luka Perkov
39743e45f8 kikwood: populate kirkwood.sh with new boards 
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus

Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 43751
 2014-12-18 18:38:43 +00:00
Luka Perkov
ec9a0f898a kirkwood: set default EA4500 switch config 
This maps the LAN ports to eth0 and WAN port to eth1.
Since there are two interfaces the 802.1q VLAN mode
is unnecessary and left disabled. Port-based VLANs
are used instead.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43750
 2014-12-18 18:38:38 +00:00
Hauke Mehrtens
abca0462d3 kernel: bgmac: fix some problems 
There are some problems in the napi usage that are fixed now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43749
 2014-12-18 16:25:22 +00:00
Hauke Mehrtens
192e945479 bcm53xx: PCIe: add link check again 
When there is no device connected to the controller we should not start
the controller. This also changes between PCIe 1.0 and PCIe 2.0 speed
based on the device. This code is based on code from the new Broadcom
PCIe controller driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43748
 2014-12-18 16:23:42 +00:00
Luka Perkov
180c1f3302 uboot-envtools: add more kirkwood boards 
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus

Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 43747
 2014-12-18 15:53:46 +00:00
Felix Fietkau
4ccf215a3e ar7: remove leftover 3.10 patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43746
 2014-12-18 11:57:42 +00:00
Felix Fietkau
0e035381dc binutils: break-out libbfd, libopcodes and ar 
Package libbfd, libopcodes and ar seperately.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43745
 2014-12-18 11:57:36 +00:00
Felix Fietkau
4571fc780d ar71xx: add support for qca956x soc 
This patch adds soc support for QCA9561 and TP9343.
TP9343 is a reduced version of QCA9561, which can be found in TP-LINK routers in China.
The qca956x_wmac has not yet been supported by ath9k.

tested on TL-WDR6500 and TL-WR882N v1 (Chinese version)

Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 43744
 2014-12-18 11:28:53 +00:00
Felix Fietkau
2f9b042d69 ar8216: Inline function ar8xxx_create_mii 
Inline function ar8xxx_create_mii.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43743
 2014-12-18 11:28:47 +00:00
Felix Fietkau
2289c7a010 ar8216: Remove read/write/rmw member functions from ar8xxx_priv 
Remove read/write/rmw member functions from ar8xxx_priv

There seems to be no real benefit of the ar8xxx_priv member functions
read/write/rmw as one implementation exists for each of them only.
Especially ar8xxx_mii_rmw is assigned to priv->rmw first and then
mapped to ar8xxx_rmw.
Rename the ar8xxx_mii_.. functions to ar8xxx_.. and use them directly.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43742
 2014-12-18 11:28:39 +00:00
Felix Fietkau
45a494b808 ar8216: Create helpers mii_read32 / mii_write32 for 32 bit MII ops 
Create helpers mii_read32 / mii_write32 for 32 bit MII ops.
Rename r3 variable to page in ar8xxx_mii_write to make it consistent
with the other ar8xxx_mii_xxxx functions.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43741
 2014-12-18 11:28:34 +00:00
Felix Fietkau
0e7f844c66 ar8216: Factor out chip-specific parameters from ar8xxx_probe_switch 
Factor out chip-specific parameters from ar8xxx_probe_switch.
Move the ar8xxx_chip definitions after the swops definitions.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43740
 2014-12-18 11:28:28 +00:00
Felix Fietkau
054767cebc ar8216: remove unused function parameter in ar8327_led_register 
Remove unused function parameter in ar8327_led_register.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43739
 2014-12-18 11:28:20 +00:00
Rafał Miłecki
e21e9c5548 bcm53xx: backport spi-nor changes and update bcm53xxspiflash 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43738
 2014-12-17 14:53:25 +00:00
Felix Fietkau
d27c682def kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43736
 2014-12-17 12:27:14 +00:00
Luka Perkov
309e74b86d kirkwood: add sheevaplug and derivatives 
Add kirkwood FDT:
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
- Topkick1281P2

Signed-off-by: Gérald Kerma <drEagle@doukki.net>

SVN-Revision: 43735
 2014-12-17 08:33:55 +00:00
Imre Kaloz
211cac98d5 Belkin AC 1750 DB (F9K1115v2) support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43734
 2014-12-17 08:27:38 +00:00
Steven Barth
d9011ad6be dnsmasq: allow de-selecting features from -full variant. 
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 43733
 2014-12-17 05:59:12 +00:00
Steven Barth
f0ecc0ec37 iproute2: bump version from 3.16.0 to 3.17.0 
Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 43731
 2014-12-16 12:43:50 +00:00
Steven Barth
5628648f87 nftables: bump to release 0.4, cleanup our patches 
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 43730
 2014-12-16 09:28:59 +00:00
Steven Barth
c6c0c275bc libnftnl: bump to upstream release 1.0.3 
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 43729
 2014-12-16 09:22:49 +00:00
Steven Barth
21bf45edd2 cyassl: bump to 3.3.0 
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 43728
 2014-12-16 09:16:00 +00:00
Felix Fietkau
f6f0984c43 build: prevent spurious host-build re-builds by touching .built after the install command before touching .installed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43721
 2014-12-15 20:14:27 +00:00
John Crispin
0ffb7323d0 ralink: remove partitoon map from mt7621.dtsi 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43720
 2014-12-15 15:55:37 +00:00
Rafał Miłecki
dd9ca05249 bcm53xx: sysupgrade support for devices with serial flash 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43719
 2014-12-15 15:43:46 +00:00
Rafał Miłecki
c3e9796cd5 brcm47xx: extract magics from specific upgrade images (and still reject them) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43718
 2014-12-15 11:09:14 +00:00
John Crispin
40e2dbf9c6 fstools: update to latest git HEAD 
adds a few cleanups and extroot/ubi support

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43717
 2014-12-15 10:37:14 +00:00
John Crispin
f8e83b1057 uboot-envtools: enable UBI support per default on oxnas 
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43716
 2014-12-15 10:37:09 +00:00
John Crispin
019ea725aa add "preinit_regular" diag.sh set_state argument 
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
 2014-12-15 10:37:00 +00:00
Rafał Miłecki
a5b6b7e419 brcm47xx: detect (and still reject for now) CyberTAN fw format 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43714
 2014-12-15 09:59:44 +00:00
John Crispin
f310e02ab3 procd: update to latest git HEAD 
fixes a bug where wdt write happened with no valid fd available
--> procd: WDT failed to write: Bad file descriptor

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43711
 2014-12-15 09:44:01 +00:00
Steven Barth
8aa9160274 nftables: mini-bump and patch cleanup 
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 43710
 2014-12-15 09:41:47 +00:00
Rafał Miłecki
fbea00b031 ramips: update mtd patches to apply after changes from r43700 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43709
 2014-12-15 09:10:43 +00:00
Rafał Miłecki
b5b4bdc066 brcm47xx: use separated function in upgrade to detect file type 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43708
 2014-12-15 08:51:14 +00:00
Steven Barth
c927daaf76 nftables: bump to latest git, fix mini-gmp patches 
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 43707
 2014-12-14 16:03:45 +00:00
Steven Barth
e90e143852 libnftnl: bump to latest git 
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 43706
 2014-12-14 16:03:18 +00:00
John Crispin
2db6da5532 kirkwood: enable EA4500 switch on 3.18 
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43704
 2014-12-14 08:57:58 +00:00
John Crispin
374ab9decc gemini: update usb driver and merge registers into one patch 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43703
 2014-12-14 08:57:52 +00:00
John Crispin
fef7b4241f gemini: merge register ethernet patches into one 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43702
 2014-12-14 08:57:43 +00:00
John Crispin
6f2b7567b8 ralink: drop old pinmux nodes from dts files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43701
 2014-12-14 08:57:16 +00:00
Rafał Miłecki
b1bfed548c kernel: warn users to use the new (dedicated) firmware splitter 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43700
 2014-12-14 00:35:03 +00:00
Felix Fietkau
d54e759611 toolchain: do not include libatomic.so in the libc package 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43699
 2014-12-13 23:58:47 +00:00
Felix Fietkau
0f51d48c0e nvram: remove libnvram.so, it is unused and incompatible to the broadcom API anyway 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43698
 2014-12-13 23:58:35 +00:00
Rafał Miłecki
2b4fbeb6d4 kernel: move old firmware uimage splitter into separated patch 
This will allow us to drop it in the future. This patch doesn't change
the final mtdpart.c, it remains the same.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43696
 2014-12-13 20:06:47 +00:00
Felix Fietkau
0fa857f3ba scripts/config: fix segfault introduced in r43652 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43695
 2014-12-13 14:01:26 +00:00
Felix Fietkau
35a9cb833c build: ensure tools are built before building the toolchain 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43693
 2014-12-13 11:57:14 +00:00
Felix Fietkau
e984869e22 realview: drop old kernel configs 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43692
 2014-12-13 11:55:59 +00:00
Felix Fietkau
cfe3280494 au1000: remove leftover 3.3 kernel config 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43691
 2014-12-13 11:55:49 +00:00
Felix Fietkau
511fadd857 au1000: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43690
 2014-12-13 11:55:41 +00:00