Commit Graph

25354 Commits

Author SHA1 Message Date
Felix Fietkau
c8609ab4f8 build: unify arm target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38211
2013-09-26 17:53:20 +00:00
Felix Fietkau
a30681dff0 build: unify mips target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38210
2013-09-26 17:53:14 +00:00
Felix Fietkau
569da024f0 build: clean up default cflags handling
- reduce redundancy
- introduce a CPU_TYPE variable for cpu specific options

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38209
2013-09-26 17:53:09 +00:00
Luka Perkov
3e5da21b15 uboot-imx6: fix typo in nitrogen6dlXg
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38205
2013-09-26 09:03:47 +00:00
Luka Perkov
64e10a637d uboot-imx6: add support for Nitrogen6x boards
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>

SVN-Revision: 38204
2013-09-26 08:36:12 +00:00
Luka Perkov
4409e1c1ae uboot-imx6: alphabetize wandboard variants
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>

SVN-Revision: 38203
2013-09-26 08:36:09 +00:00
Luka Perkov
907d0f76b7 imx6: enable XZ_DEC_BCJ and XZ_DEC_ARM
squashfs is unable to decompress some blocks without that:

[    1.880530] SQUASHFS error: Unable to read page, block bc77a, size 14c50
[    1.887268] SQUASHFS error: Unable to read fragment cache entry [bc77a]
[    1.893889] SQUASHFS error: Unable to read page, block bc77a, size 14c50
[    1.900636] SQUASHFS error: Unable to read fragment cache entry [bc77a]
[    1.907275] SQUASHFS error: Unable to read page, block bc77a, size 14c50
[    1.913994] SQUASHFS error: Unable to read fragment cache entry [bc77a]
[    1.920631] SQUASHFS error: Unable to read page, block bc77a, size 14c50

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38202
2013-09-25 23:35:55 +00:00
Luka Perkov
2d1775dafc imx6: fix spi on gw5400-a
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38201
2013-09-25 23:35:54 +00:00
Hauke Mehrtens
6910cb4d6f bcm53xx: bgmac: use srab switch driver
use the srab switch driver on these SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38200
2013-09-25 21:49:12 +00:00
Hauke Mehrtens
0bdc137636 bcm53xx: update bgmac driver
Update the bgmac driver with the patches already used for bcm47xx target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38199
2013-09-25 21:47:25 +00:00
Hauke Mehrtens
c75a970337 kernel: b53: add Register Access Bridge Registers (SRAB) interface
The SRAB interface is used on BCM4707 and BCM5301X SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38198
2013-09-25 21:44:28 +00:00
Gabor Juhos
fc79d210e0 kernel: create firmware partition from MyLoader partition parser
This is in preparation for sysupgrade support for Compex devices.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38197
2013-09-25 20:13:12 +00:00
Gabor Juhos
261fc738cc image: generate separate jffs2 images w/o padding
The new root.jffs2-*-raw images can be used for firmware
images with custom padding requirements.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38196
2013-09-25 20:03:20 +00:00
Gabor Juhos
2bcab84045 tools/padjffs2: allow to specify extra offset
This will be useful for firmware images which are
using a custom header.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38195
2013-09-25 20:03:19 +00:00
Gabor Juhos
942e69b166 avr32: optimize image generation
- remove the kernel+rootfs partitions from the MTD partition map,
 - use a temporary directory for intermediate image files,
 - append the root squashfs directly to the kernel,
 - don't hardcode uImage size in the jffs2 images,

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38194
2013-09-25 19:32:34 +00:00
Gabor Juhos
11e4e6ebfb avr32: enable the new mtdsplit code
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38193
2013-09-25 19:32:33 +00:00
Gabor Juhos
b71c7d8d3c ar71xx: use correct board id for TL-MR3040 v2
Fix the image building code so that the kernel correctly
distinguishes between hardware revisions.

Signed-off-by: Mads Hansen <d@taba.se>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38192
2013-09-25 18:42:14 +00:00
Gabor Juhos
164cd38b41 ar71xx: add user-space support for TL-MR3040 v2
Signed-off-by: Mads Hansen <d@taba.se>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38191
2013-09-25 18:42:11 +00:00
Gabor Juhos
f8aef84e49 ar71xx: improve kernel support for the TL-MR3040 v2
This patch adds support for the hardware slide switch on
the TL-MR3040 v2.

Signed-off-by: Mads Hansen <d@taba.se>
[juhosg: use EV_SW instead of EV_KEY]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38190
2013-09-25 18:42:10 +00:00
Luka Perkov
77d075aa54 imx6: add support for gw51xx
The Gateworks GW51xx family of products is based on the Freescale
i.MX6DL SoC and offers a small form-factor with peripherals such as:

 - i.MX6DL 512MB DDR3
 - 256MB NAND FLASH
 - 1x PCIe
 - 1x USB EHCI (to PCIe socket)
 - 1x USB OTG
 - HDMI out
 - Analog Video in
 - Gateworks System Controller

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38189
2013-09-25 18:07:24 +00:00
Luka Perkov
f55d0ff66c imx6: add support for gw54xx
The Gateworks GW54xx family of products is based on the Freescale
i.MX6Q SoC and offers a large variety of peripherals such as:

  - i.MX6Q 1GB DDR3 (standard)
  - 256MB NAND FLASH (standard)
  - 6x PCIe (3x with USB)
    - Optional expansion for additional USB/PCI based periperhals
  - 1x USB EHCI
  - 1x USB OTG
  - HDMI Audio/Video in/out
  - Analog Video in/out
  - Analog Audio in/out
  - Gateworks System Controller

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38188
2013-09-25 18:07:20 +00:00
Gabor Juhos
7530971113 package/kernel: add support for industrial-io and AD799x
Add support for industrial IO core and (still staging)
driver for AD799x, a high precision I2C ADC family.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38187
2013-09-25 18:00:35 +00:00
Gabor Juhos
4fcc9ce9ff package/kernel: add hwmon driver for ADT7410
Add support for the ADT7410 hwmon driver, a high precision
I2C temperature sensor.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38186
2013-09-25 18:00:34 +00:00
Gabor Juhos
6ac0dfb280 package/kernel: move I2C-GPIO drivers from i2c.mk to other.mk
Move pca953x support from i2c.mk to other.mk, where other
GPIO drivers are located. Remove duplicate pcf857x support
from i2c.mk.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, and reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38185
2013-09-25 18:00:33 +00:00
Luka Perkov
cbcd3024dc imx6: update gw5400-a dts cleanup
- remove dead code
- alphabatize

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38184
2013-09-25 17:55:38 +00:00
Gabor Juhos
8daeba6d47 atheros: fix kernel warning about usage of reset gpio
During a reset the gpiolib warns about using the reset gpio
without explicit requesting it before:

[  147.930000] ------------[ cut here ]------------
[  147.930000] WARNING: at drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x68/0xcc()
[  147.930000] autorequest GPIO-5
[  147.930000] Modules linked in: ath5k ath mac80211 ipv6 cfg80211 compat arc4 crypto_blkcipher aead gpio_button_hotplug
[  147.930000] Call Trace:
[  147.930000] [<8004e3bc>] dump_stack+0x8/0x34
[  147.930000] [<80058430>] warn_slowpath_common+0x78/0xa4
[  147.930000] [<800584e4>] warn_slowpath_fmt+0x2c/0x38
[  147.930000] [<80166f18>] gpio_ensure_requested+0x68/0xcc
[  147.930000] [<80167264>] gpio_direction_output+0xdc/0x168
[  147.930000] [<8004aba8>] ar2315_restart+0x28/0x54
[  147.930000] [<80069778>] sys_reboot+0x178/0x1c0
[  147.930000] [<80043670>] stack_done+0x20/0x40
[  147.930000]
[  147.930000] ---[ end trace 2c7a53d8549562d6 ]---

This is fixed with this patch by using another gpiolib api call
which includes the missing request.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38183
2013-09-25 17:51:12 +00:00
Gabor Juhos
0380904acb kernel/3.10: refresh all target patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38182
2013-09-25 17:13:24 +00:00
Gabor Juhos
76a1617063 ramips: sync 3.10 configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38181
2013-09-25 16:39:23 +00:00
Gabor Juhos
482b5f34e5 lantiq/3.10: unbreak the mtd-split patch
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38180
2013-09-25 16:22:04 +00:00
Gabor Juhos
1bd2b56081 kernel/3.10: add upstream commit id to the backported hso patches
Also remove the internal patch numbers.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38179
2013-09-25 14:38:57 +00:00
Gabor Juhos
443072fda7 kernel/3.10: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38178
2013-09-25 14:38:56 +00:00
Gabor Juhos
87fb2dad70 avr32: remove 3.8 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38175
2013-09-25 13:34:52 +00:00
Gabor Juhos
816820575b avr32: switch to 3.10
It works:
    _______                     ________        __
   |       |.-----.-----.-----.|  |  |  |.----.|  |_
   |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
   |_______||   __|_____|__|__||________||__|  |____|
            |__| W I R E L E S S   F R E E D O M
   -----------------------------------------------------
   BARRIER BREAKER (Bleeding Edge, r38163)
   -----------------------------------------------------
    * 1/2 oz Galliano         Pour all ingredients into
    * 4 oz cold Coffee        an irish coffee mug filled
    * 1 1/2 oz Dark Rum      with crushed ice. Stir.
    * 2 tsp. Creme de Cacao
   -----------------------------------------------------
  root@OpenWrt:/# uname -a
  Linux OpenWrt 3.10.12 #1 Tue Sep 24 18:47:12 CEST 2013 avr32 GNU/Linux
  root@OpenWrt:/# cat /proc/cpuinfo
  processor       : 0
  chip type       : AT32AP700x revision C
  cpu arch        : AVR32B revision 1
  cpu core        : AP7 revision 0
  cpu MHz         : 140.000
  i-cache         : 16K (4 ways x 128 sets x 32)
  d-cache         : 16K (4 ways x 128 sets x 32)
  features        : dsp simd ocd perfctr java
  bogomips        : 281.23
  root@OpenWrt:/#

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38174
2013-09-25 13:34:51 +00:00
Gabor Juhos
b8d09278a1 avr32: add support for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38173
2013-09-25 13:33:49 +00:00
Luka Perkov
49722e7dcb feeds: enable cloning of specific git commit
Following syntax should be used to enable this feature:

src-git custom git://openwrt/custom-feed^SHA_COMMIT_ID

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38172
2013-09-25 13:02:55 +00:00
Felix Fietkau
59c05778f0 uhttpd: fix appending https ports to cmdline
Otherwise it is started only on non-secure ports.

Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 38171
2013-09-25 07:44:48 +00:00
Luka Perkov
5166bb0b1b quilt: update to 0.60
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38170
2013-09-24 20:01:03 +00:00
Luka Perkov
948f060014 bison: update to 3.0
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38169
2013-09-24 20:01:02 +00:00
Luka Perkov
76974babaf m4: update to 1.4.17
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38168
2013-09-24 20:01:00 +00:00
Luka Perkov
473b747b1a sdcc: drop tool, it is not used since r31227
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38167
2013-09-24 16:21:30 +00:00
Steven Barth
d6c62705fb uml: work around mangled parameter handling for ubd
SVN-Revision: 38166
2013-09-24 13:36:42 +00:00
Steven Barth
31f654396a uml: fix some kernel compilation issues with GCC
SVN-Revision: 38165
2013-09-24 13:36:38 +00:00
Steven Barth
777e69451d uml: work-around console issue with procd
SVN-Revision: 38164
2013-09-24 13:36:33 +00:00
Gabor Juhos
5016b6513c ppc44x: remove 3.8 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38163
2013-09-24 13:17:48 +00:00
Gabor Juhos
059d90e6f6 ppc44x: switch to 3.10
Compile tested only. The target is marked as
broken since 16 months so the kernel version
does not matter too much.

The target is scheduled for removal.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38162
2013-09-24 13:17:47 +00:00
Gabor Juhos
4356a214eb ppc44x: add support for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38161
2013-09-24 13:17:46 +00:00
Gabor Juhos
521f5df589 rb532: remove 3.8 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38160
2013-09-24 13:17:45 +00:00
Gabor Juhos
58fbd3ce5c rb532: switch 3.10
Compile tested only. The target is marked as
broken since 9 months so the kernel version
does not matter too much.

The target is scheduled for removal.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38159
2013-09-24 13:17:43 +00:00
Gabor Juhos
2f05e1f6d6 rb532: add support for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38158
2013-09-24 13:17:42 +00:00
Gabor Juhos
13ec78c18f rb532: image: fix broken ifneq statement
Fixes the following build error:

  /devel/openwrt/staging_dir/host/bin/patch-cmdline \
  /devel/openwrt/build_dir/target-mipsel_uClibc-0.9.33.2/linux-rb532/vmlinux-initramfs \
  'root=/dev/mtdblock1 rootfstype=yaffs2 '
  Could not open kernel imagemake[5]: *** [install] Error 255

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38157
2013-09-24 13:17:39 +00:00