openwrt/target/linux/ar71xx/files/arch/mips/ath79
Felix Fietkau 814d70b2fd ar8216: rework/fix AR8337 MAC swap handling
In r45970 the MAC swap handling was made opt-in, however some boards
have been forgotten during the conversion. Since the reference design
uses this MAC swapping, and pretty much all known boards using this chip
seem to do so too, enabling the swapping is a more reasonable default
than leaving it disabled.

Change the code to still allow boards to opt-out of this.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47956
2015-12-20 14:25:45 +00:00
..
dev-ap9x-pci.c ar71xx: add ap91_pci_init_simple helper 2012-12-12 16:49:48 +00:00
dev-ap9x-pci.h ar71xx: add ap91_pci_init_simple helper 2012-12-12 16:49:48 +00:00
dev-dsa.c ar71xx: add v3.18 support 2015-02-15 19:45:29 +00:00
dev-dsa.h
dev-eth.c ath79: dev-eth: fix QCA9561 set phy interface mode and mask 2015-09-16 08:33:04 +00:00
dev-eth.h ar71xx: add a helper function to set RXDV/RXD of ETH_CFG on AR934x 2015-04-20 15:00:52 +00:00
dev-m25p80.c ar71xx: Add ath79_register_m25p80_large to support >16MB SPI chips 2015-12-19 11:32:20 +00:00
dev-m25p80.h ar71xx: Add ath79_register_m25p80_large to support >16MB SPI chips 2015-12-19 11:32:20 +00:00
dev-nfc.c ar71xx: ar934x_nfc: fix memory initialization bug 2014-03-12 12:52:36 +00:00
dev-nfc.h ar71xx: add ath79_nfc_set_ecc_mode helper 2013-09-19 18:43:42 +00:00
Kconfig.openwrt ar71xx: Kernel board definition for PowerCloud CR5000 2015-12-19 11:27:32 +00:00
mach-alfa-ap96.c ar71xx: add linux 3.14 support 2014-08-07 12:40:53 +00:00
mach-alfa-nx.c
mach-all0258n.c
mach-all0315n.c
mach-antminer-s1.c ar71xx: Bitmain Antminer S1/S3 set GPIO for USB Power 2015-10-26 09:01:28 +00:00
mach-antminer-s3.c ar71xx: Bitmain Antminer S1/S3 set GPIO for USB Power 2015-10-26 09:01:28 +00:00
mach-ap83.c
mach-ap96.c
mach-ap113.c
mach-ap132.c ar71xx: add kernel support for Atheros AP132 Reference Board 2013-01-29 19:12:30 +00:00
mach-ap143.c ar71xx: add support for ap143 2015-07-07 08:06:05 +00:00
mach-ap147.c ar71xx: Add support for AP147-010 reference board 2015-07-24 09:09:42 +00:00
mach-ap152.c ar71xx: add support for ap152 reference board 2015-09-16 08:33:14 +00:00
mach-archer-c7.c add support for the archer c5 2014-07-23 12:47:25 +00:00
mach-arduino-yun.c ar71xx: add Arduino Yun 2015-11-10 23:13:09 +00:00
mach-aw-nr580.c
mach-bhu-bxu2000n2-a.c ar71xx: add kernel support for BHU Networks BXU2000n-2 A1 board 2013-10-30 06:50:57 +00:00
mach-bsb.c ar71xx: Add support for Black Swift 2015-08-17 06:16:54 +00:00
mach-cap324.c ar71xx: Kernel board definition for PowerCloud CAP324 2015-12-19 11:27:19 +00:00
mach-cap4200ag.c ar71xx: add support for the Senao CAP4200AG board 2012-10-27 08:55:38 +00:00
mach-carambola2.c ar71xx: update Carambola2 platform data 2014-08-04 14:46:52 +00:00
mach-cf-e316n-v2.c target: ar71xx: add support for COMFAST CF-E316N v2 board 2015-09-11 16:31:35 +00:00
mach-cpe510.c ar71xx: add support for TP-LINK CPE210/220/510/520 2014-11-26 08:59:32 +00:00
mach-cr3000.c ar71xx: Kernel board definition for PowerCloud CR3000 2015-12-19 11:27:25 +00:00
mach-cr5000.c ar71xx: Kernel board definition for PowerCloud CR5000 2015-12-19 11:27:32 +00:00
mach-dgl-5500-a1.c add D-link DGL-5500 A1 support 2014-11-27 14:27:34 +00:00
mach-dhp-1565-a1.c ar71xx: Added support for D-link DHP-1565 rev. A1 2014-11-19 09:20:47 +00:00
mach-dir-505-a1.c ar71xx: dir-505: fix reset button gpio active_low value 2015-02-09 12:17:00 +00:00
mach-dir-600-a1.c ar71xx: add support for dlink dir-615-e1 2014-06-02 14:43:35 +00:00
mach-dir-615-c1.c ar71xx: fix D-Link DIR-615 rev. C1 WLAN MAC address 2015-01-28 19:19:47 +00:00
mach-dir-615-i1.c ar71xx: add support for D-Link DIR-615 rev. Ix board 2015-07-07 13:48:39 +00:00
mach-dir-825-b1.c ar71xx: dir-825-b1: use ath79_parse_ascii_mac helper 2013-09-20 16:41:32 +00:00
mach-dir-825-c1.c ar71xx: fix WLAN 5 GHz LED init on dir-825-c1 2013-10-20 15:59:04 +00:00
mach-dlan-hotspot.c ar71xx: add support for the devolo dLAN Hotspot 2015-11-21 21:24:18 +00:00
mach-dlan-pro-500-wp.c ar71xx: add support for the devolo dLAN pro 500 Wireless+ 2015-07-14 07:32:33 +00:00
mach-dlan-pro-1200-ac.c ar71xx: add support for the devolo dLAN pro 1200+ WiFi ac 2015-07-14 07:37:03 +00:00
mach-dr344.c ar71xx: Add support for Wallys DR344 2015-12-11 15:04:47 +00:00
mach-dragino2.c ar71xx: Fix LED definitions for the DRAGINO2 board 2014-10-14 10:33:07 +00:00
mach-eap300v2.c ar71xx: add kernel support for the EnGenius EAP300 v2 board 2014-07-14 21:30:26 +00:00
mach-eap7660d.c
mach-el-m150.c ar71xx: Fix the sys LEDs on the EasyLink M150 and mini 2014-11-14 16:58:29 +00:00
mach-el-mini.c ar71xx: Fix the sys LEDs on the EasyLink M150 and mini 2014-11-14 16:58:29 +00:00
mach-epg5000.c ar8216: rework/fix AR8337 MAC swap handling 2015-12-20 14:25:45 +00:00
mach-esr900.c ar71xx: use ETH_ALEN for consistency 2014-08-25 06:35:58 +00:00
mach-esr1750.c ar8216: rework/fix AR8337 MAC swap handling 2015-12-20 14:25:45 +00:00
mach-ew-dorin.c ar71xx: add status led found on ew-dorin boards 2015-05-10 07:47:04 +00:00
mach-f9k1115v2.c ar8216: rework/fix AR8337 MAC swap handling 2015-12-20 14:25:45 +00:00
mach-gl-ar150.c ar71xx: add GL-AR150 support V3 2015-11-24 18:29:59 +00:00
mach-gl-ar300.c ar71xx: add GL-AR300 support V3 2015-11-24 18:30:19 +00:00
mach-gl-domino.c ar71xx: add GL-Domino Pi support V3 2015-11-24 18:30:50 +00:00
mach-gl-inet.c ar71xx: Fix GL.iNet WLAN LED 2014-07-21 19:26:46 +00:00
mach-gs-minibox-v1.c ar71xx: Add Gainstrong MiniBox v1.0 support to trunk 2015-10-19 17:55:25 +00:00
mach-gs-oolite.c ar71xx: oolite: the buttons are not active_low 2014-08-01 11:19:34 +00:00
mach-hiwifi-hc6361.c ar71xx: add kernel support for HiWiFi HC6361. 2014-06-02 14:56:24 +00:00
mach-hornet-ub.c Fix (invert/revert) Hornet-UB WPS LED state 2015-03-15 19:25:48 +00:00
mach-ja76pf.c
mach-jwap003.c
mach-mc-mac1200r.c ar71xx: Add support for MERCURY MAC1200R 2015-02-09 12:16:51 +00:00
mach-mr12.c ar71xx: Add support for the Meraki MR12 & MR16 2015-05-23 15:27:22 +00:00
mach-mr16.c ar71xx: Add support for the Meraki MR12 & MR16 2015-05-23 15:27:22 +00:00
mach-mr18.c ar71xx: add support for Cisco's MR18 2015-12-12 06:42:29 +00:00
mach-mr600.c ar71xx: Fix 2.4G WiFi LED of the OpenMesh MR600 board 2014-08-18 13:09:14 +00:00
mach-mr900.c ar71xx: Use *_eth_cfg helper for Open Mesh MR900 boards 2015-07-07 13:47:39 +00:00
mach-mr1750.c ar71xx: add kernel support for the OpenMesh MR1750 board 2015-09-14 20:10:43 +00:00
mach-mynet-n600.c ar71xx: my net n600: simplify LNA GPIO setup 2014-01-10 09:37:58 +00:00
mach-mynet-n750.c ar71xx: mynet-n750: define LEDs connected to the AR8327 switch 2014-01-21 17:17:42 +00:00
mach-mynet-rext.c ar71xx: fix 100/10mbps ethernet link issues on mynet range extender 2015-06-14 17:41:01 +00:00
mach-mzk-w04nu.c
mach-mzk-w300nh.c
mach-nbg460n.c ar71xx: remove __dev{init,exit} annotations from kernel files 2013-02-19 20:52:06 +00:00
mach-nbg6716.c ar8216: rework/fix AR8337 MAC swap handling 2015-12-20 14:25:45 +00:00
mach-om2p.c ar71xx: fix reset button gpio for OM2P/OM2P-HS 2014-10-06 04:51:51 +00:00
mach-om5p.c ar71xx: Increase RXD/RDV to 2 on OM5P-AN 2015-04-20 15:01:00 +00:00
mach-onion-omega.c ar71xx: add support for Onion Omega 2015-07-24 09:09:49 +00:00
mach-pb42.c
mach-pb92.c
mach-qihoo-c301.c ar71xx: qihoo: define flash variable as static 2015-02-07 19:59:02 +00:00
mach-r6100.c Netgear R6100 support 2014-11-26 08:28:22 +00:00
mach-rb4xx.c ar71xx: register the micro sd card reader on RB493G 2013-02-10 12:31:38 +00:00
mach-rb91x.c ar71xx: rb91x: fix ethernet packet loss issues 2014-04-13 20:41:52 +00:00
mach-rb95x.c ar71xx: rb95x: use correct SPI flash address 2014-03-12 12:52:39 +00:00
mach-rb750.c ar71xx: Routerboard 751 Mac Address Offset Fix 2013-02-08 09:34:53 +00:00
mach-rb922.c ar71xx: add initial support for RB911G-5HPacD 2015-04-07 20:04:03 +00:00
mach-rb2011.c ar71xx: rb2011: apply patch to file 2015-02-07 21:10:51 +00:00
mach-rbsxtlite.c ar71xx: Add support for MikroTik RouterBOARD SXT Lite 2014-07-01 13:38:30 +00:00
mach-rw2458n.c ar71xx: rw2458n - Use eeprom (art) from wifi card 2013-03-15 14:35:50 +00:00
mach-smart-300.c add support for the NC-LINK SMART-300 2014-08-11 11:44:51 +00:00
mach-tew-632brp.c ar71xx: TEW632BRP has buttons 'active low', fix board config 2013-07-28 10:23:22 +00:00
mach-tew-673gru.c ar71xx: tew-673gru: use ath79_parse_ascii_mac helper 2013-09-20 16:41:34 +00:00
mach-tew-712br.c ar71xx: tew-712br: use ath79_parse_ascii_mac helper 2013-09-20 16:41:36 +00:00
mach-tew-732br.c ar71xx: add kernel support for the TEW-732BR board 2013-09-23 09:49:01 +00:00
mach-tew-823dru.c ar71xx: add support for TRENDnet TEW-823DRU 2015-12-17 09:30:05 +00:00
mach-tl-mr3x20.c ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio 2012-11-05 13:23:27 +00:00
mach-tl-mr11u.c ar71xx: improve kernel support for the TL-MR3040 v2 2013-09-25 18:42:10 +00:00
mach-tl-mr13u.c ar71xx: Fix LED polarity for the TP-LINK TL-MR13U. 2015-03-10 13:26:50 +00:00
mach-tl-mr3020.c ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards 2013-01-07 14:30:37 +00:00
mach-tl-wa701nd-v2.c ar71xx: add support for TL-WA701ND v2 2015-01-20 15:48:07 +00:00
mach-tl-wa830re-v2.c ar71xx: added support for TL-WA830RE V2 2014-07-13 07:12:22 +00:00
mach-tl-wa901nd-v2.c
mach-tl-wa901nd.c ar71xx: fix tl-wa901nd buttons code 2013-08-05 09:09:39 +00:00
mach-tl-wa7210n-v2.c ar71xx: TL-WA7210n v2 support 2015-02-24 12:00:50 +00:00
mach-tl-wax50re.c ar71xx: add support for TP-LINK TL-WA860RE v1 2014-07-13 10:03:41 +00:00
mach-tl-wdr3320-v2.c ar71xx: add TP-LINK TL-WDR3320 v2 support 2015-09-14 20:12:16 +00:00
mach-tl-wdr3500.c ar71xx: fix ethernet LEDs on the TL-WDR3500 2013-03-25 06:40:03 +00:00
mach-tl-wdr4300.c ar71xx: fix TP-LINK TL-WDR3600/4300 RFKILL switch positions 2015-03-15 19:39:47 +00:00
mach-tl-wdr6500-v2.c ar71xx: add support for TP-Link TL-WDR6500 v2 2015-08-17 06:24:04 +00:00
mach-tl-wr703n.c ar71xx: fix typo in tl-wr710n mac setup (fixes #16469) 2014-05-24 08:01:33 +00:00
mach-tl-wr720n-v3.c ar71xx: add support for TL-WR720N-v4. 2015-06-18 18:21:23 +00:00
mach-tl-wr741nd-v4.c ar71xx: add support for WIFI button on tp-link tl-mr3220v2 2013-06-04 13:25:54 +00:00
mach-tl-wr741nd.c
mach-tl-wr841n-v8.c ar71xx: add support for the TP-LINK TL-WR941ND v5 2015-02-04 06:10:20 +00:00
mach-tl-wr841n-v9.c ar71xx: fix ethernet initialization on QCA953x-based boards (TP-Link TL-WR841N/ND v9, Compex WPJ531) 2015-07-07 08:05:50 +00:00
mach-tl-wr841n.c
mach-tl-wr941nd-v6.c ar71xx: add support for TP-LINK TL-WR941ND v6 (international version) 2015-11-08 20:39:18 +00:00
mach-tl-wr941nd.c
mach-tl-wr1041n-v2.c generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data 2012-12-22 12:12:35 +00:00
mach-tl-wr1043nd-v2.c wr1043nd-v2: Change .code of the wi-fi button to KEY_RFKILL 2014-10-14 19:01:21 +00:00
mach-tl-wr1043nd.c
mach-tl-wr2543n.c
mach-tube2h.c ar71xx: Ext LNA patch for TUBE2H and HORNET-UB targets 2015-03-12 10:06:53 +00:00
mach-ubnt.c
mach-weio.c ar71xx: Add WeIO Board Support 2015-09-24 09:08:47 +00:00
mach-whr-hp-g300n.c
mach-wlae-ag300n.c
mach-wlr8100.c ar8216: rework/fix AR8337 MAC swap handling 2015-12-20 14:25:45 +00:00
mach-wndap360.c ar71xx: WNDAP360 adding wifi LED support 2014-06-02 15:02:54 +00:00
mach-wndr3700.c ar71xx: use netgear prefix for WNDR3700 LED names 2013-09-21 15:55:50 +00:00
mach-wndr4300.c ar71xx: split wndr4300 and wndr3700v4 into 2 seperate mips machines 2014-07-21 18:41:52 +00:00
mach-wnr2000-v3.c ar71xx: add Netgear WNR1000v2/WNR1000v2-VC support (#18633) 2015-01-30 08:06:40 +00:00
mach-wnr2000-v4.c ar71xx: do general formatting on wnr2000-v4 2015-05-08 12:24:30 +00:00
mach-wnr2000.c ar71xx: use netgear prefix for WNR2000 LED names 2013-09-21 15:55:51 +00:00
mach-wnr2200.c ar71xx: on wnr2200, revert the mac0/mac1, the ethernet interfaces are swapped. use MAC1 for wlan 2015-12-11 21:12:04 +00:00
mach-wp543.c ar71xx: wp543: set active_low flag for the buttons 2014-01-26 14:55:32 +00:00
mach-wpe72.c ar71xx: compex wpe72 add space to include statement 2015-07-09 07:04:14 +00:00
mach-wpj344.c ar71xx: fix leds and gpio on wpj344 2015-04-29 20:04:46 +00:00
mach-wpj531.c ar71xx: compex wpj531 register usb support 2015-07-09 07:03:54 +00:00
mach-wpj558.c ar71xx: wpj588: add missing usb support 2015-03-10 16:11:39 +00:00
mach-wrt160nl.c ar71xx: rename wrt160nl's trx partition parser 2015-03-11 15:56:15 +00:00
mach-wrt400n.c
mach-wzr-450hp2.c ar71xx: add support for buffalo WZR-450HP2 2014-10-22 11:02:18 +00:00
mach-wzr-hp-ag300h.c ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp 2013-07-14 14:05:27 +00:00
mach-wzr-hp-g300nh2.c ar71xx: use uimage split for WZR-HP-G300NH2 2013-07-14 14:05:31 +00:00
mach-wzr-hp-g300nh.c ar71xx: use uimage split for WZR-HP-G300NH 2013-07-14 14:05:23 +00:00
mach-wzr-hp-g450h.c ath9k: merge initval and tx gain table updates, calibration fixes 2013-12-08 14:48:30 +00:00
mach-zcn-1523h.c ar71xx: don't use the unknown LED on the ZCN-1523-5 board 2012-11-04 22:08:54 +00:00
machtypes.h ar71xx: Kernel board definition for PowerCloud CR5000 2015-12-19 11:27:32 +00:00
Makefile ar71xx: Kernel board definition for PowerCloud CR5000 2015-12-19 11:27:32 +00:00
nvram.c ar71xx: allow ath79_nvram_parse_mac_addr parsing mac with quotes 2014-07-13 19:43:54 +00:00
nvram.h
pci-ath9k-fixup.c ar71xx: allow pci calibration fixup to work with ar9344 2015-07-07 13:46:44 +00:00
pci-ath9k-fixup.h
routerboot.c ar71xx: routerboot: export extended wlan data via sysfs 2015-04-07 20:03:43 +00:00
routerboot.h ar71xx: routerboot: add support for extended radio data 2015-04-07 20:03:35 +00:00