mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
25,247 Commits 3 Branches 0 Tags 517 MiB
1dd33c4d6c
Commit Graph

978 Commits

Author SHA1 Message Date
Gabor Juhos
d44d954dec ar71xx: add kernel support for the RB435G board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34239
 2012-11-18 10:18:01 +00:00
Gabor Juhos
d62bddc620 ar71xx: update PCI IRQ map for RB4xx devices 
Should fix #12269.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34238
 2012-11-18 09:51:04 +00:00
Gabor Juhos
8d4857d677 ar71xx: add kernel support for the OpenMesh MR600 board 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34231
 2012-11-18 09:32:33 +00:00
Gabor Juhos
91bab828aa ar71xx: add support for TP-Link TL-WA7510N 
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.

http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n

[juhosg:
  - cleanup commit message
  - move non kernel related stuff into separate changes
  - rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
  - merge WA7510N support into the mach-tl-wa901nd.c file
  - add 3.6 support]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34187
 2012-11-13 14:48:00 +00:00
Gabor Juhos
f2528b1792 ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34087
 2012-11-05 13:23:27 +00:00
Gabor Juhos
ed35253f4c ar71xx: don't use the unknown LED on the ZCN-1523-5 board 
According to #12421, GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.

If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34076
 2012-11-04 22:08:54 +00:00
Gabor Juhos
7228a91a3b ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards 
The default pll_1000 value had to be changed
in order to make it working.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33993
 2012-10-29 17:24:30 +00:00
Gabor Juhos
a6549ac1cb ar71xx: remove NO_AUTOINCR flag from the NAND drivers 
The flag is not present in 3.6.
Also add compatibility patches for 3.3.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33971
 2012-10-28 12:21:15 +00:00
Gabor Juhos
e2ec99889e ar71xx: ag71xx: fix build_skb arguments for 3.6 
Also add a compatibility patch for 3.3

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33969
 2012-10-27 17:11:06 +00:00
Gabor Juhos
d54c9653e9 ar71xx: add support for the Senao CAP4200AG board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33956
 2012-10-27 08:55:38 +00:00
Gabor Juhos
269872fe1e ar71xx: use mtd_read in wrt160nl_part 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33951
 2012-10-27 07:57:58 +00:00
Gabor Juhos
973eda6077 ar71xx: use mtd_read in tplinkpart 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33950
 2012-10-27 07:57:57 +00:00
Gabor Juhos
f1f388d527 ar71xx: rw2458n - fix flash parts 
See #12338. Redwave rw2458 has uboot, not redboot.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33867
 2012-10-19 18:32:49 +00:00
Gabor Juhos
31387947c8 ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33818
 2012-10-17 18:27:47 +00:00
Gabor Juhos
5ffc08e3dc ar71xx: add a helper function for setting up ETH_CFG register on AR934x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33817
 2012-10-17 18:27:45 +00:00
Gabor Juhos
c5a32cfc92 ar71xx: add support for the OpenMesh OM2P-HS board 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33800
 2012-10-17 08:26:01 +00:00
Gabor Juhos
196c6c5b45 ar71xx: add support for the TL-WR841N/ND v8 board 
SVN-Revision: 33621
 2012-10-04 20:16:03 +00:00
Gabor Juhos
170cd7a19a ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac 
SVN-Revision: 33575
 2012-09-27 20:05:42 +00:00
Gabor Juhos
e7b1949d87 ar71xx: automatically find WLAN calibration data on TEW-673GRU 
SVN-Revision: 33539
 2012-09-25 12:57:40 +00:00
Gabor Juhos
8ed8e51e74 ar71xx: automatically find WLAN calibration data on DIR-825-B1 
SVN-Revision: 33538
 2012-09-25 12:57:38 +00:00
Gabor Juhos
e70ad61e44 ar71xx: use different machtype and setup for the TL-MR3040 
Should fix #12211. Compile tested only.

SVN-Revision: 33535
 2012-09-24 18:45:56 +00:00
Gabor Juhos
7c85646176 ar71xx: ar934x_nfc: remove unused oob parameter of ar934x_nfc_send_read 
SVN-Revision: 33454
 2012-09-17 20:30:55 +00:00
Gabor Juhos
3bdf0bc36f ar71xx: ar934x_nfc: increase DMA retry count 
SVN-Revision: 33453
 2012-09-17 20:30:54 +00:00
Gabor Juhos
b7cb43f6a6 ar71xx: ar934x_nfc: optimize READOOB operation on large page devices 
SVN-Revision: 33452
 2012-09-17 20:30:53 +00:00
Gabor Juhos
96dde2e591 ar71xx: ar934x_nfc: fix RNDOUT operation 
SVN-Revision: 33451
 2012-09-17 20:30:51 +00:00
Gabor Juhos
338b698fb6 ar71xx: ar934x_nfc: fix READ{0,1} operation on large page devices 
SVN-Revision: 33450
 2012-09-17 20:30:50 +00:00
Gabor Juhos
5804b9d1b7 ar71xx: register the NAND controller device on the RB2011 
SVN-Revision: 33388
 2012-09-13 07:26:26 +00:00
Gabor Juhos
4fd67c3cd4 ar71xx: add device registration code for the AR934x NAND flash controller 
SVN-Revision: 33387
 2012-09-13 07:26:25 +00:00
Gabor Juhos
1e5fdbeae5 ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x 
SVN-Revision: 33385
 2012-09-13 07:26:22 +00:00
Gabor Juhos
aa2f4d4c8d ar71xx: add initial support for RB2011UAS-2HnD 
SVN-Revision: 33349
 2012-09-09 14:05:32 +00:00
Gabor Juhos
3686e18727 ar71xx: use routerboot_find_tag to find wlan data offset on RB751 
SVN-Revision: 33348
 2012-09-09 14:05:30 +00:00
Gabor Juhos
ccabe4a1b4 ar71xx: add RouterBoot related helper routines 
SVN-Revision: 33347
 2012-09-09 14:05:28 +00:00
Gabor Juhos
44bf7c7cc1 ar71xx: define MTD partitions for RB2011 
SVN-Revision: 33345
 2012-09-09 14:05:24 +00:00
Gabor Juhos
6ae5ec16e0 ar71xx: add preliminary support for Mikrotik RB2011L 
This patch adds preliminary support for the Mikrotik RB2011L.
The NAND flash is not yet supported, so only the initramfs
kernel can be used for now.

[juhosg: remove unnecessary PCI/USB related stuff, the board
does not use that, update commit message]

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 33344
 2012-09-09 14:05:22 +00:00
Gabor Juhos
94bac7366c ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x 
SVN-Revision: 33343
 2012-09-09 14:05:20 +00:00
Gabor Juhos
7592057774 ar71xx: add dynamic MDIO clock calculation 
SVN-Revision: 33342
 2012-09-09 14:05:17 +00:00
Gabor Juhos
88a5478781 ar71xx: use the RLE library for RB751 
SVN-Revision: 33338
 2012-09-08 17:51:56 +00:00
Gabor Juhos
11c3392b7f Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240" 
That was based on assumptions.

SVN-Revision: 33310
 2012-08-29 10:37:55 +00:00
Gabor Juhos
eb9a97a360 ar71xx: all0315n: fix ethernet according to vendor info 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33309
 2012-08-29 10:37:54 +00:00
Gabor Juhos
5fdbb33db4 ar71xx: Buffalo WZR-HP-AG300H LED support 
An improved LED support for Buffalo WZR-HP-AG300H.

There will be two new packages to go with this patch
(ar922x-led-fix-hotplug and ar922x-led-fix-init).
These packages essentially perform the same task of
disabling "JTAG over GPIO pins" function which is
currently required for LEDs on AR922x emac GPIO to work,
and are both considered a temporary fix that circumvent
this problem.

[juhosg: add the hotplug script from the proposed
ar922x-led-fix-hotplug package to ar71xx/base-files]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 33294
 2012-08-29 10:11:55 +00:00
Gabor Juhos
eebdd633e4 ar71xx: add support for the Allnet ALL0315N board 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33281
 2012-08-27 14:55:31 +00:00
Gabor Juhos
cca873e8e0 ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33280
 2012-08-27 14:55:26 +00:00
Gabor Juhos
8b3d95bba9 ar71xx: add support for the TRENDnet TEW-712BR board 
SVN-Revision: 33231
 2012-08-22 20:09:13 +00:00
Gabor Juhos
2811d6c183 ar71xx: fix comment style in mach-tl-wr2543n.c 
SVN-Revision: 33227
 2012-08-22 12:42:59 +00:00
Gabor Juhos
5a694e09c8 ar71xx: add ALL0305 board alias 
For the pure convenience of having a correctly named
image and system name in /proc/cpuinfo , until we can
do that by having system names in DTS...

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33224
 2012-08-22 12:33:22 +00:00
Gabor Juhos
0517183b9c ar71xx: add support for TP-Link TL-WDR3600 
The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has
only two antennas.

[juhosg: remove the custom machine type, change the board name instead]

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 33219
 2012-08-22 09:43:18 +00:00
John Crispin
968ac3fd03 add led defintion for the WR2543 5GHz WLAN LED 
Signed-off-by: Andy Leiserson <andy@leiserson.org>

SVN-Revision: 33215
 2012-08-22 09:10:24 +00:00
Gabor Juhos
79a8660d67 ar71xx: init switch hw_reset on the TL-WR1043ND board 
SVN-Revision: 32944
 2012-08-02 09:54:28 +00:00
Gabor Juhos
563400ef10 ar71xx: ew-dorin: added router firmware generation 
[juhosg: remove dead code]

Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

SVN-Revision: 32934
 2012-08-01 12:24:57 +00:00
Gabor Juhos
010aec0619 ar71xx: Buffalo WLAE-AG300N initial support 
The patch set for Buffalo WLAE-AG300N initial support.

There is another patch for wireless led support that
is posted separately.

Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.

[juhosg: fix coding style]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32931
 2012-08-01 12:24:52 +00:00
Gabor Juhos
7c932579fa ar71xx: make 2.4GHz wlan LED work on the WR2543N 
Because ath9k does not supports separate LEDs for
different bands yet, the 2.4GHz LED will show the
activity, even if the 5GHz band is selected.

SVN-Revision: 32615
 2012-07-05 16:25:26 +00:00
Gabor Juhos
797944d3f1 ar71xx: add support for the OpenMesh OM2P-LC board 
Patch-by: Marek Linder <marek@open-mesh.com>

SVN-Revision: 32611
 2012-07-05 08:26:53 +00:00
Gabor Juhos
d1b237b335 ar71xx: add initial support for the QCA955X SoCs 
SVN-Revision: 32606
 2012-07-05 08:26:47 +00:00
Gabor Juhos
b8618fd3f2 ar71xx: improve MDIO busy wait code 
SVN-Revision: 32586
 2012-07-03 15:24:02 +00:00
Gabor Juhos
86013d40d5 ar71xx: remove the built-in MTD map of the ALL0258N 
Pass the mtd_layout via the kernel command line instead.
Also increase the kernel partition size to 1024k, so current kernel can fit in.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32585
 2012-07-03 15:24:01 +00:00
Gabor Juhos
8b9931fd27 ar71xx: add support for the TL-WDR4300 board 
SVN-Revision: 32459
 2012-06-19 11:51:17 +00:00
Gabor Juhos
f509a87f2d ar71xx: remove superfluous include of asm/mach-ath79/pci.h 
SVN-Revision: 32455
 2012-06-19 10:13:43 +00:00
Gabor Juhos
1a1121158f ar71xx: add a common function to configure USB power GPIOs 
SVN-Revision: 32454
 2012-06-19 10:13:41 +00:00
Felix Fietkau
26cf21df02 ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de) 
SVN-Revision: 32447
 2012-06-19 00:22:04 +00:00
Felix Fietkau
dddf321b6e ar71xx: swap the PHY address of the ethernet port of TL-MR3040/TL-MR11U similar to TL-MR3020 to fix ethernet link detection 
SVN-Revision: 32336
 2012-06-13 12:54:22 +00:00
Felix Fietkau
73b8805e78 ar71xx: fix PHY setup on TL-MR3020 (fixes #11572) 
SVN-Revision: 32093
 2012-06-06 17:24:12 +00:00
Felix Fietkau
dc9675282e ar71xx: add a helper function for setting up PHY4 swapping on ar933x 
SVN-Revision: 32092
 2012-06-06 17:24:09 +00:00
Felix Fietkau
a9cd8446f3 ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality 
SVN-Revision: 31956
 2012-05-28 20:39:50 +00:00
Felix Fietkau
367e4b3994 ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack 
SVN-Revision: 31934
 2012-05-28 02:55:59 +00:00
Felix Fietkau
8039a1bbb2 ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x 
SVN-Revision: 31925
 2012-05-27 21:02:41 +00:00
Gabor Juhos
013f434f5b ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD 
Patch by Kamil Trzciński <ayufan@osk-net.pl>

SVN-Revision: 31846
 2012-05-23 21:05:25 +00:00
Felix Fietkau
a3f2fd187b ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet) 
SVN-Revision: 31736
 2012-05-15 10:36:39 +00:00
Felix Fietkau
0ff3c396d3 kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes 
SVN-Revision: 31637
 2012-05-06 21:19:14 +00:00
Gabor Juhos
ab897ab04e ar71xx: add support for the TP-Link TL-WR1041N v2 board 
Patch-by: Vince Huang <axishero@foxmail.com>

SVN-Revision: 31608
 2012-05-05 17:02:35 +00:00
Gabor Juhos
3e3a4d3d6b ar71xx: allow to disable link polling on unused PHYs 
SVN-Revision: 31533
 2012-04-29 18:29:24 +00:00
Gabor Juhos
a447f1810c ar71xx: enable MIB counters in the built-in switch of the AR934x 
SVN-Revision: 31476
 2012-04-25 13:02:11 +00:00
Gabor Juhos
408de85883 ar71xx: use ap91_pci_init for RB751{,G} 
SVN-Revision: 31356
 2012-04-19 21:31:48 +00:00
Gabor Juhos
0a9832b50d ar71xx: move USB device registration directly into rb751{,g}_setup 
SVN-Revision: 31355
 2012-04-19 21:31:43 +00:00
Gabor Juhos
78967e6640 ar71xx: add ap9x_pci_get_wmac_data helper 
SVN-Revision: 31354
 2012-04-19 21:31:42 +00:00
Gabor Juhos
5c9ca38e47 ar71xx: add sanity checks to decode_rle 
Also use -EINVAL instead of -1.

SVN-Revision: 31353
 2012-04-19 21:31:40 +00:00
Gabor Juhos
e295a077ce ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD 
Great collaboration on these two fantastic routers on the openwrt forum:
https://forum.openwrt.org/viewtopic.php?id=32320
Above all kudos to aryufan. Well done and thank you everyone else who
contributed.

To-Do: LED for wlan is not yet activated
To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by
the router

Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
[juhosg: fix line wrapped patch, fix checkpatch errors, add missing
kernel patches]

SVN-Revision: 31208
 2012-04-06 06:45:07 +00:00
Gabor Juhos
b77217d963 ar71xx: boost SPI flash read performance 
mtd_speedtest results:
                           page read speed
                    old         new        delta
DB120            929 KiB/s   2597 KiB/s   +179.55%
TL-WR1043ND v1   754 KiB/s   2166 KiB/s   +187.27%
TL-WR703N v1     745 KiB/s   2176 KiB/s   +192.08%
TL-MR3220 v1     752 KiB/s   2154 KiB/s   +186.44%
TL-WR2543ND v1   564 KiB/s   2130 KiB/s   +277.66%
TL-WR741ND v2    525 KiB/s   1767 KiB/s   +236.57%
ALFA-AP96        702 KiB/s   1977 KiB/s   +181.62%
WNDR3700         697 KiB/s   1965 KiB/s   +181.92%

SVN-Revision: 31118
 2012-03-27 19:38:17 +00:00
Gabor Juhos
6cd5fb7001 ar71xx: remove the built-in MTD map of the AP96 board 
Pass the mtd_layout via the kernel command line instead.

SVN-Revision: 31112
 2012-03-27 19:38:07 +00:00
Gabor Juhos
61ee283899 ar71xx: remove the built-in MTD map of the PB92 board 
Pass the mtd_layout via the kernel command line instead

SVN-Revision: 31111
 2012-03-27 19:38:05 +00:00
Gabor Juhos
1094dc1996 ar71xx: remove the built-in MTD map of the Zcomax devices 
Pass the mtd_layout via the kernel command line instead.

SVN-Revision: 31110
 2012-03-27 19:38:04 +00:00
Gabor Juhos
87e4ec687b ar71xx: remove the built-in MTD maps of several boards 
We are passing the MTD layout via the kernel command line, so
it makes no sense to duplicate it in mach-* files. The patch
removes the built-in MTD maps of the following boards:

 * AP113
 * ALFA N2/N5
 * DIR-600
 * DIR-615
 * DIR-825
 * TEW-6{3,5}2BRP
 * TEW-673GRU
 * WHR-G301N
 * WHR-HP-GN
 * WHR-HP-G300N

SVN-Revision: 31108
 2012-03-27 19:38:01 +00:00
Gabor Juhos
f4d1e3d147 ar71xx: fix button polarity on TL-WR703N and TL-WR741N v4 
SVN-Revision: 31102
 2012-03-27 19:37:51 +00:00
Gabor Juhos
8a2e4b49de ar71xx: add initial support for RB750GL 
SVN-Revision: 31025
 2012-03-19 15:57:04 +00:00
Gabor Juhos
d19f3dd512 ar71xx: make rb750_latch_change 'static void' 
SVN-Revision: 31024
 2012-03-19 15:57:03 +00:00
Gabor Juhos
5348f46c80 ar71xx: add latch_change field to rb750_led_platform_data 
SVN-Revision: 31023
 2012-03-19 15:57:01 +00:00
Gabor Juhos
8a471efe01 ar71xx: add platform data for the RB750 NAND driver 
SVN-Revision: 31022
 2012-03-19 15:56:59 +00:00
Gabor Juhos
e9b45ebaba ar71xx: add AR934x specific interface speed setup for ge0 
SVN-Revision: 31017
 2012-03-19 11:11:20 +00:00
Gabor Juhos
6036151187 ar71xx: add support for the jjPlus JA76PF2 board 
SVN-Revision: 30957
 2012-03-16 18:00:34 +00:00
Gabor Juhos
a680662391 ar71xx: change LED name prefix on the jjplus boards 
SVN-Revision: 30956
 2012-03-16 18:00:26 +00:00
Gabor Juhos
c00b53f3d0 ar71xx: move micrel PHY driver to the generic linux target 
SVN-Revision: 30946
 2012-03-15 09:25:53 +00:00
Gabor Juhos
ff909edf94 ar71xx: ag71xx: fix ARP frame reception on AR934x switch ports 
SVN-Revision: 30926
 2012-03-13 17:29:38 +00:00
Gabor Juhos
cd6a4cde13 ar71xx: ag71xx: start aneg on switch PHYs after reset 
SVN-Revision: 30925
 2012-03-13 17:29:37 +00:00
Gabor Juhos
7c9534cfd7 ar71xx: ag71xx: poll PHY status of all available switch ports 
SVN-Revision: 30924
 2012-03-13 17:29:36 +00:00
Gabor Juhos
8449eecf5f ar71xx: ag71xx: allow to use port 5 of the AR934x built-in switch 
SVN-Revision: 30923
 2012-03-13 17:29:34 +00:00
Gabor Juhos
1c5ac02a29 ar71xx: reset the switch on AR934x before ethernet device registration 
SVN-Revision: 30922
 2012-03-13 17:29:33 +00:00
Gabor Juhos
66df117d1b ar71xx: use a dummy callback for interfaces with fixed speed 
SVN-Revision: 30913
 2012-03-12 20:38:58 +00:00
Gabor Juhos
8b2b37ae58 ar71xx: merge ar934x_bo_ddr_flush patch 
SVN-Revision: 30912
 2012-03-12 20:38:57 +00:00
Gabor Juhos
2d89fa7f43 ar71xx: fix WPS button polarity on TL-WR2543N 
SVN-Revision: 30849
 2012-03-07 19:50:53 +00:00
Gabor Juhos
c455a0f7be ar71xx: ag71xx: fix get_port_link callback 
SVN-Revision: 30841
 2012-03-07 16:32:35 +00:00
Gabor Juhos
5a83b3a5c7 ar71xx: ag71xx: use the generic get_port_link implementation 
SVN-Revision: 30840
 2012-03-07 16:32:34 +00:00
Gabor Juhos
7052847972 ar71xx: ag71xx: keep VLAN tags if VLAN is not enabled 
SVN-Revision: 30768
 2012-03-01 19:49:05 +00:00
Gabor Juhos
766999085a ar71xx: ag71xx: add BQL support 
It will be usable only from linux-3.3.

Based on a patch by Dave Taht <dave.taht@bufferbloat.net>

SVN-Revision: 30417
 2012-02-10 14:56:47 +00:00
Gabor Juhos
32a18a05f8 ar71xx: add preliminary support for 3.3 
SVN-Revision: 30410
 2012-02-10 11:53:56 +00:00
Gabor Juhos
fe0c7aac66 ar71xx: merge 3.2 fixes 
SVN-Revision: 30406
 2012-02-10 08:19:33 +00:00
Gabor Juhos
d72bde99cd ar71xx: merge files-3.2 to files 
SVN-Revision: 30405
 2012-02-10 08:19:31 +00:00
Gabor Juhos
d5d37febb4 ar71xx: use dynamically allocated partitions in wrt160nl_part 
SVN-Revision: 29970
 2012-01-31 18:36:51 +00:00
Gabor Juhos
386cbfe45b ar71xx: move arch specific files to files-2.6.39 
SVN-Revision: 29867
 2012-01-22 22:38:11 +00:00
Gabor Juhos
e7dee3aeed ar71xx: wrt160nl_part: include module.h and fix compiler warnings 
SVN-Revision: 29856
 2012-01-22 17:55:38 +00:00
Gabor Juhos
a7d344565b ar71xx: tplinkpart: include module.h 
SVN-Revision: 29855
 2012-01-22 17:55:36 +00:00
Gabor Juhos
6c2638c5e2 ar71xx: rename vsc7385 spi driver 
SVN-Revision: 29853
 2012-01-22 13:51:57 +00:00
Gabor Juhos
bb16739db9 ar71xx: rename ap81 spi driver 
SVN-Revision: 29852
 2012-01-22 13:51:56 +00:00
Gabor Juhos
5ef8b922fa ar71xx: rename rb4xx spi drivers 
SVN-Revision: 29851
 2012-01-22 13:51:54 +00:00
Gabor Juhos
aad175d5b6 ar71xx: rename the nxp_74hc153 driver 
SVN-Revision: 29850
 2012-01-22 13:51:52 +00:00
Gabor Juhos
ef1c53b7b7 ar71xx: change board id of the UniFi board 
SVN-Revision: 29849
 2012-01-22 13:51:50 +00:00
Gabor Juhos
f90e578903 ar71xx: include linux/module.h in the micrel phy driver 
SVN-Revision: 29848
 2012-01-22 13:51:49 +00:00
Gabor Juhos
fbf81c8e79 ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c 
SVN-Revision: 29713
 2012-01-11 18:00:50 +00:00
Gabor Juhos
88d8cdd503 ar71xx: pb44_spi: add shutdown handler 
This allows to access the flash from a kexec'd kernel.

SVN-Revision: 29710
 2012-01-11 09:14:18 +00:00
Gabor Juhos
e1b7995aef ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/remove 
SVN-Revision: 29709
 2012-01-11 09:14:17 +00:00
Gabor Juhos
67444c7795 ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpers 
SVN-Revision: 29708
 2012-01-11 09:14:15 +00:00
Gabor Juhos
0f566a376c ar71xx: ar71xx_spi: add shutdown handler 
This allows to access the flash from a kexec'd kernel.

SVN-Revision: 29707
 2012-01-11 09:14:14 +00:00
Gabor Juhos
09a6e3f662 ar71xx: ar71xx_spi: save and restore regs from probe/remove 
SVN-Revision: 29706
 2012-01-11 09:14:13 +00:00
Gabor Juhos
714a9bd641 ar71xx: ar71xx_wdt: add shutdown handler 
SVN-Revision: 29705
 2012-01-11 09:14:11 +00:00
Gabor Juhos
a1dcbc66a6 ar71xx: add initial support for the TL-WR2543N/ND board 
The WLAN LEDs are not working yet.

SVN-Revision: 29680
 2012-01-07 19:36:35 +00:00
Gabor Juhos
67b2814842 ar71xx: local mac support on the wndr3700 
The wndr3700 at least has no eth0 mac address and usually leverages
the first wireless device's mac when in a bridged scenario. If,
however, you want to route, and not bridge the interfaces, you
need a unique mac address for it.

This patch sets the local bit on the mac address pulled from the
wireless chip and uses the resulting address for eth0.

Patch-by: Dave Taht <dave.taht@gmail.com>

SVN-Revision: 29675
 2012-01-07 17:24:44 +00:00
Gabor Juhos
1e848b17ad ar71xx: add support for Redwave RW2458N 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29669
 2012-01-06 07:20:59 +00:00
Gabor Juhos
8eb0b7ab3d ar71xx: fix sections mismatch warnings in the nand drivers 
SVN-Revision: 29667
 2012-01-05 18:08:33 +00:00
Gabor Juhos
b8f0d86115 ar71xx: add inital support for the ALFA Network AP96 board 
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.

SVN-Revision: 29662
 2012-01-04 21:13:54 +00:00
Gabor Juhos
923f3e3752 ar71xx: allow to use the command line hack on compex devices 
SVN-Revision: 29659
 2012-01-04 17:30:58 +00:00
Gabor Juhos
2f53f82203 ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 
These models are based on the AP99 reference board,
and uses the AR7241 SoC.

SVN-Revision: 29658
 2012-01-04 17:30:57 +00:00
Gabor Juhos
90bfef9ec9 ar71xx: allow to use LAN LED on the TL-WA901N/ND boards 
SVN-Revision: 29653
 2012-01-04 17:30:50 +00:00
Gabor Juhos
1045c83527 ar71xx: add support for TP-Link TL-MR3020 
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29651
 2012-01-04 17:30:47 +00:00
Gabor Juhos
1e68f10b87 ar71xx: add support for the ALFA Network N2/N5 boards 
SVN-Revision: 29635
 2012-01-01 19:30:25 +00:00
Gabor Juhos
5c067db8a7 ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards 
SVN-Revision: 29631
 2011-12-31 15:02:46 +00:00
Gabor Juhos
8c2482f76e ar71xx: ag71xx: implement get_port_{link,stats} callbacks 
SVN-Revision: 29626
 2011-12-31 15:02:26 +00:00
Gabor Juhos
557009bbdb ar71xx: fix LEDs on the WRT400N 
SVN-Revision: 29624
 2011-12-31 13:54:11 +00:00
Felix Fietkau
db0a1db257 ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547) 
SVN-Revision: 29598
 2011-12-22 05:43:53 +00:00
Jo-Philipp Wich
ebefe1eb3a the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649) 
SVN-Revision: 29593
 2011-12-21 01:27:48 +00:00
Felix Fietkau
11013ad947 ar71xx: add missing wireless led changes for wzr-hp-g300nh2 
SVN-Revision: 29568
 2011-12-19 09:04:15 +00:00
Felix Fietkau
0cc056cb7e ar71xx: add support for the wzr-hp-g300nh2 
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

SVN-Revision: 29567
 2011-12-18 22:20:17 +00:00
Gabor Juhos
67c7980290 ar71xx: connect GMAC0 to the internal switch on DB120 
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.

SVN-Revision: 29557
 2011-12-15 22:25:38 +00:00
Gabor Juhos
5bbd416e38 ar71xx: add defines for the AR934X GMAC interface 
SVN-Revision: 29556
 2011-12-15 22:25:36 +00:00
Gabor Juhos
e47a8c2bb2 ar71xx: fix GMAC1 interface speed on the DB120 board 
SVN-Revision: 29555
 2011-12-15 22:25:35 +00:00
Gabor Juhos
36bc2c2c80 ar71xx: ag71xx: fix switch port setup for AR934X 
SVN-Revision: 29554
 2011-12-15 22:25:32 +00:00
Gabor Juhos
00667c3846 ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X 
SVN-Revision: 29553
 2011-12-15 22:25:30 +00:00
Gabor Juhos
0540970345 ar71xx: ag71xx: setup switch interface mode on AR934X 
SVN-Revision: 29552
 2011-12-15 22:25:29 +00:00
Gabor Juhos
44014110b8 ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs 
SVN-Revision: 29551
 2011-12-15 22:25:28 +00:00
Gabor Juhos
e2a546d475 ar71xx: allow to attach the internal switch for AR934x 
SVN-Revision: 29550
 2011-12-15 22:25:22 +00:00
Gabor Juhos
9ae65588d8 ar71xx: introduce ar71xx_switch_data 
SVN-Revision: 29549
 2011-12-15 22:25:11 +00:00
Gabor Juhos
850be54b72 ar71xx: tplinkpart: allow to detect JFFS2 as well 
SVN-Revision: 29543
 2011-12-15 22:03:40 +00:00
Gabor Juhos
b7d7481b07 ar71xx: ag71xx: check PHY IDs before accessing the switch registers 
SVN-Revision: 29541
 2011-12-15 13:25:23 +00:00